[SOLVED] HAL don't start-

Hello!
It appears that my HAL now [FAIL] at startup even if it is in my rc.conf.
I've tried
# /etc/rc.d/hal restart
:: Stopping Hardware Abstraction Layer [FAIL]
:: Starting Hardware Abstraction Layer [FAIL]
DBUS is also installed…
The weird thing is that worked great before… and not even because of an upgrade, it fails…
Have you some ideas ?
Last edited by jiehong (2009-06-18 21:40:03)

It also says [FAIL] for me, yet HAL still functions correctly (automounts drives, etc). Are you sure the daemon doesn't work anyway?

Similar Messages

[PARTIALLY SOLVED] HAL fails to start

** UPDATE: PARTIALLY SOLVED - SEE BOTTOM OF THE FIRST POST
HAL fails to start. I'm not exactly sure why this is, but I believe it has something to do with my attempts to get automounting working under gnome.
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
[zen@intellitech ~]$ vim /etc/rc.conf
MODULES=(acpi-cpufreq cpufreq_ondemand e1000 iwl4965 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore thinkpad_acpi uinput vboxdrv)
DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-1
hal-info 0.20080508-1
[zen@intellitech ~]$ /usr/sbin/hald --daemon=no --verbose=yes
03:13:37.451 [i] hald.c:669: hal 0.5.11
03:13:37.451 [i] hald.c:734: Will not daemonize
03:13:37.451 [i] hald_dbus.c:5381: local server is listening at unix:abstract=/var/run/hald/dbus-pdtZvbqaVq,guid=312b47921cba4c5cdbee099a48ec87d1
03:13:37.452 [E] ck-tracker.c:367: Error doing GetSeats on ConsoleKit: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
03:13:37.452 [E] ck-tracker.c:792: Could not get seats and sessions
03:13:37.452 [W] hald_dbus.c:5806: Could not initialize seats and sessions from ConsoleKit
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
03:13:37.453 [i] hald_runner.c:301: Runner has pid 3675
03:13:37.453 [i] hald_runner.c:182: runner connection is 0x15bdec0
03:13:37.456 [W] osspec.c:373: Unable to open /proc/mdstat: No such file or directory
03:13:37.457 [D] util_helper.c:124: drop_privileges: could not set group id
[zen@intellitech ~]$ vim /etc/group
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:root,zen
disk::6:root,zen
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root,zen
ftp::11:
mail::12:
log::19:root
smmsp::25:
games::50:
network:x:90:zen
video:x:91:zen
audio::92:root,zen
optical::93:root,zen
floppy:x:94:root,zen
storage:x:95:root,zen
power:x:98:root,zen
nobody::99:
users::100:zen
locate:x:21:
uucp:x:14:
http:x:33:
scanner:x:96:
dbus:x:81:root,zen
hal:x:82:root,zen
avahi:x:84:root,zen
camera:x:97:
gdm:x:101:
vboxusers:x:108:zen
samba:x:109:zen,root
* Yes, I know it is bad practice to have a normal user listed under the disk group. It is necessary, however, in order to have raw disk access for virtual box.
[zen@intellitech ~]$ sudo /etc/rc.d/dbus stop
:: Stopping D-BUS system messagebus [DONE]
[zen@intellitech ~]$ sudo /etc/rc.d/hal start
:: Starting D-BUS system messagebus [DONE]
:: Starting Hardware Abstraction Layer [FAIL]
It's odd, because D-BUS will start but hal will not... Anybody have any suggestions?
* UPDATE (10/08/08): Did a full system upgrade and removed dbus from daemons array in rc.conf. UDEV EVENTS Processing speed seems to be back to normal.
** SOLUTION UPDATE: After removing custom ntfs-3g fdi policies from /etc/hal/fdi/policy/, hal seems to load without any problems. This seems to be a bug, since my policies were working at one point, and I believe a hal update caused the problem. I'll see if I can track down the exact hal version that it breaks on, and submit a respective bug report for it.
** OFF-TOPIC UPDATE: Using hwdetect --modules to get a modules list, and using these modules in rc.conf with MOD_AUTOLOAD turned off (and also in mkinitcpio.conf and running mkinitcpio -g <path>), seems to have dramatically increased my "Load udev events" processing time. After doing this, my udev speed went from almost 4000ms to literally < 500ms.
Last edited by intellitech (2008-10-08 14:58:53)

koch wrote:
intellitech wrote:DAEMONS=(syslog-ng @network !net-profiles @net-auto @netfs !samba !crond @acpid @dbus @hal @alsa !daemoot !avahi-daemon @cups @ddclient @bluetooth)
you have dbus starting before hal but hal starts debus by default so please try this...
DAEMONS=(...@acpid @hal @alsa...)
and delete debus from that line.
Removed dbus from the daemons array and hal still won't start. Also, I noticed that the "Loading udev events" portion of the boot process seems to take a lot longer than it used to. Last boot, it took about 19130ms, whereas it used to take < 3000ms. Could these be related?
Also, I ran a full system upgrade, both udev and hal were upgraded.
[zen@intellitech ~]$ pacman -Q | grep hal
hal 0.5.11-4
hal-info 0.20080508-1
[zen@intellitech ~]$ pacman -Q | grep udev
klibc-udev 128-1
udev 128-5

Kmix and Klipper crashes and don't start, KDE 4.4 [SOLVED]

I had a trouble with Plasma after adding a "fancy panel" which was placed at the same position as my normal panel. Everytime I tried to remove it, Plasma crshed, so I had to delete a part of a config file. But also the Klipper and Kmix don't start:
Crash handler says:
Klipper:
Application: Klipper (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708493 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c62459 in kdemain () from /usr/lib/libkdeinit4_klipper.so
#31 0x0000000000406b7e in _start ()
KMix:
Application: KMix (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708553 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c524b0 in KMixApp::KMixApp() () from /usr/lib/libkdeinit4_kmix.so
#31 0x00007f6051c2b74d in kdemain () from /usr/lib/libkdeinit4_kmix.so
#32 0x0000000000406b7e in _start ()
How can I fix it?
Last edited by Staerseus (2010-02-14 12:19:01)

SOLVED! Update to the newest version of KDE 4.4 helped me!

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Use the Adobe Cleaner Tool:
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

[Solved] Fresh install; HAL won't start?

So I just finished a fresh installation and now I can't start X because HAL won't start up at all.
I haven't messed around with anything except for installing everything and fixing up my config files.
Seems like HAL is crashing because of permissions but I even checked the paths and they seem to be fine:
hald --daemon=no --verbose=yes
01:08:41.090 [i] hald.c:673: hal 0.5.14
01:08:41.090 [i] hald.c:674: using child timeout 250s
01:08:41.090 [i] hald.c:739: Will not daemonize
01:08:41.090 [i] hald_dbus.c:5444: local server is listening at unix:abstract=/var/run/hald/dbus-uBDySnOMjt,guid=33e68e9ab5cc00ac1ce4ba92000008c1
01:08:41.091 [i] hald_runner.c:304: Runner has pid 1695
Runner started - allowed paths are '/usr/lib/hal:/usr/lib/hal/scripts:/usr/bin'
01:08:41.093 [i] hald_runner.c:184: runner connection is 0x17da830
01:08:41.097 [W] osspec.c:393: Unable to open /proc/mdstat: No such file or directory
** (process:1694): WARNING **: Failed to add monitor on '/usr/share/hal/fdi/preprobe': Permission denied
** (process:1694): WARNING **: Failed to add monitor on '/etc/hal/fdi/preprobe': Permission denied
** (process:1694): WARNING **: Failed to add monitor on '/usr/share/hal/fdi/information': Permission denied
** (process:1694): WARNING **: Failed to add monitor on '/etc/hal/fdi/information': Permission denied
** (process:1694): WARNING **: Failed to add monitor on '/usr/share/hal/fdi/policy': Permission denied
** (process:1694): WARNING **: Failed to add monitor on '/etc/hal/fdi/policy': Permission denied
22:08:41.098 [i] mmap_cache.c:126: Regenerating fdi cache..
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry
Could not get password database information for UID of current process: User "???" unknown or no memory to allocate password entry
22:08:41.099 [E] hald_runner.c:888: Error running 'hald-generate-fdi-cache': org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
22:08:41.099 [i] mmap_cache.c:104: In regen_cache_cb exit_type=2, return_code=0
22:08:41.099 [E] mmap_cache.c:153: fdi cache regeneration failed!
22:08:41.099 [i] mmap_cache.c:156: fdi cache generation done
22:08:41.099 [i] mmap_cache.c:278: cache mtime is 0
*** [DIE] osspec.c:osspec_init():449 : Unable to read /proc/mounts
Can't find anything worthwhile in logs etc., and I can't think of anything that could be causing this?
I checked that the HAL user exists and has been added to the default groups, but that "???"-part is alarming.
DBus starts up normally.
Networking and "lo" seem to be working fine as well, and I don't have iptables up.
Last edited by initbox (2011-07-05 16:59:36)

tomk wrote:Update your system - xorg does not depend on hal anymore. hal is obsolete.
Ah, haven't been up to date on all the changes, it seems...
In the past I've had problems with the nvidia driver + Xorg without HAL, I think?
Anyhow, contrary to the Xorg page, I had no 20-nvidia.conf. I created that and now I'm able to startx without HAL but KDM doesn't work, the screen flickers when it attempts to start Xorg but then it crashes. Strange. Nothing in the Xorg logs either.
I'll have to see about that next, but it's nice to be able to get rid of HAL at least.

[Solved] Libreoffice 3.6.1.4 don't start

Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)

Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

WEB.SHOW_DOCUMENT don´t start Firefox 3.5

Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
Thomas

Hi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas

Some Apps don't start up anymore after upgrading to BB 10.2.1

I have upgraded to BB 10.2.1 today and am pleased to see new features and enhancements.
I also have to report a few issues though:
- startup takes much longer now
- several non native apps don't start up anymore. I even reinstalled some, but that didn't help. Any thoughts?

have you tried using Snap?
http://supportforums.blackberry.com/t5/Downloaded-Applications-for/You-Upgraded-to-OS-10-2-1-and-wan...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

HAL won't start...no X, only terminal

Hey, everything was going on quite well for a few months...now HAL won't start. At all. Obviously, any WM doesn't start either.
When I try to start HAL I get this:
Failed to start message bus: Error in file /etc/dbus-1/system.d/ConsoleKit.conf, line 1, column 0: no element found
and
sudo half --daemon=no --verbose=yes
Password:
<time> [i] hald.c:673: hal 0.5.14
<time> [i] hald.c:674: using child timeout 250s
hald.c:739 Will not daemonize
hald_dbus.c:5444: local server is listening at unix:abstract=/var/run/hald/dub-xbTfmFQNCq,guid=dfa78a35969778d0e6e5046f00000112
hald_dbus.c:5821: dbus_bus_get(): Failed to connect to socket /var/run/dbus/system_bus_socket:No such file or directory
Things I've tried: adding/removing dbus from daemons array, fscking the disk (who knows)...restarting hal and dbus 1,000 times.
Any ideas?
Thanks,
EDIT: I notice that I upgraded dbus-python to 0.83.1-1 this afternoon...the problem started following a reboot...hmmm...ALSO, I should note that I am using 86-64, if that means anything.
Last edited by lasu1 (2010-04-05 20:56:09)

Hal wasn't (I don't know if it is now) starting here too. I guess I just have two simultaneous troubles, one of which seems to be the same you guys are having.
Do your xinit error messages give a line like this: "FATAL: Could not load /lib/modules/2.6.32-ARCH/modules.dep: No such file or directory" ?
It was being the trouble for me, and I've googled a bit about, and this results at least in X not working for some other people, I don't know if it's due to hal not starting or whatever (it was happening to me too).
It seems that how to fix it may be a bit different for everyone. It apparently results from upgrading the kernel and not booting right away, but I might have misunderstood something. For some people the solution was simply too boot (!), but for others it involved commands such as "depmod -a". In my case, I've reinstalled the kernel (some people downgraded it), and it worked, at least X worked. I didn't test network yet, and I didn't pay attention to see if hal started. Despite of X starting, I was having my own troubles with its configuration, so I didn't have mouse or keyboard. I'm typing from debian, I'm going too take a look at arch's xorg.conf and then reboot once again, if there's something that looks more or less evidently wrong (like it not being there).
So, that's it. I suggest you to see if that "modules.dep" thing appears in your xinit error messages, and google a bit for it if that's the case.
EDIT: Yep, it did fix everything for me. Hal starts, X starts, and now that I've restored xorg.conf, I can use the keyboard and I also have internet connection on arch.
EDIT 2: additional note. The error message I've mentioned does not appear in the xorg.0.log on /var somewhere (I couldn't find/grep it at least), but only as the output of xinit (probably startx as well).
Last edited by the dsc (2010-04-24 22:35:57)

Notebook Toshiba L40 don't start when unplug power cable

When i unplug power cable system don't start and crash on login KDE or faster. When power cable is plug everything is ok. Tested on Kubuntu 9.04, Windows Vista and works ok. On Kubuntu 9.10 alpha 5 i have the same problem.
Sorry for my english

Hello AmlnnN,
I understand have you finished doing a little maintenance   work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1.       I want you to boot into the bios menu this link will show you how.
2.       Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3.       You may see 2 test there if that is the case run both test.
4.       It may take some time so please have the ac adapter plugged in.
5.       Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Itunes don't start (First installation)

Hello,
French user in enterprise ... we have a 60 iPhones and we want to install Itunes on PC of the User.
PC are under Windows 7 Prof. and in a domain.
Installation on the User domain account = OK but launch Itunes = 50% OK and Other KO (Itunes never start)
if KO : under session domain admin = itunes start OK ; under session Local admin = itunes start Ok
We declare the domain User as Admin local and iTunes Dont't Start (again)
When I tell don't start, no msg of erreur, no process in the process list in the monitor.
We try to install the Setup (x64) as administrator (right clic) => launch setup = install OK
Same bug when we want to start itunes since the user domain account.
We can't change the user account.
We 're thinking there is authorization problem but we can't find where.
All we found on forum and else aren't solve the bug.
A fix ? A link ? to help use ... we have 10 PC whith the start bug and we are near the suicid

Resolve
We found bad directory redirection for "documents" on domain GPO (redirection on a old server).
We :
* change the bad value in the GPO.
* restart the PC and login with the domain user account. GPO apply correctly.
* launch iTunes and ... miracle ... Itunes Start correctly.
No thanks to Apple, because:
* no error message,
* no information for bad directory to create iTunes directory in "my music",
* no question to write/declare a new location cause of error create iTunes directory for the media bank
* just close Itunes on the error without information and 6 hours loose in search for the cause.
Thanks to fromsouth to the search way.
See you soon

Ai CS2 Suddenly don't start..!

Suddenly, Ai CS2 don't start, just launching the app gives the message "Could not complete requested operation" and quit.
Since 3 weeks ago I've been working on both CS2 and CS3 versions with no problems, and today CS2 don't wanna go...!
b I need CS2 because I make preseparated files that in CS3 don't work on my Harlequin Rip Station (another issue I have to solve soon)
I've deleted the CS2 preferences folder and the "com.adobe.illustrator.plist"
file with no results.
Now, under another user, both versions opens fine...
OsX 10.4.11 Brand new MacPro Dual core Intel, 5 Gb RAm....
any Idea, somebody whit the same situation?

It can be a corrupt font or a corrupt color profile.
Fonts are good suspects as in a new user certain fonts will not load especially if they are managed by a font manager.
Display and other colro profiles can get corrupt as well I would first look at the fonts, way to quickly find out if it is the problem is to deactivate them except for the system fonts.
Trash AA's Settingts folder again and see if all is well if so it is definitely the font. If not I would suspect the possible but rarely
the culprit color profile.

After IOS 8 upgrade IPad 2 don't start

Hi,
After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

My ipad2 is having the same problem. I can get it to start up by plugging the charger in. I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

[SOLVED] HAL don't start-

Similar Messages

Maybe you are looking for