Stock Removal using Pick Point

Hi all,
I have configure Storage Type 100 with SU managed and a pick point ST 001.
Once the TO is generated from delivery, the TO information will be from source ST100 to destination ST916.
So I would like to know, how to identify the SU is arrived pick point? If there any status or information can help me to know the status of TO.
Since i need to identify,
1.SU still in the Source Storage Type (TO open)
2.Worker starts transfer to SU to pick point with liftfork
3.SU arrived Pick point
4.Picker picked the material from pick point (TO picked)
5.Picker transferred the material to GI area (TO transferred and completed)
I dun know how to let user know the status of 2 and 3
Thanks in advance.
David Tai

Hi David,
If the pick point / ID point is defined for SType 100 then during transfer order creation system will automatically stamps the destination storage type as Pick point when it is taking out the stock from Stype 100
I have simulated one scenario where for my storage type 010 the ID point / Pick Point is defined as 011
Stock removal / putaway defined in material master & Stock in Storage bin are as below
& the Putaway / Picking storage type search is defined as
Now for the Transfer order creation i am using the T-Code LT09 (enter the SU number & MvT and system automatically propose 011 as destination storage type in the transfer order
Upon confirmation of the transfer order 0168, use LT09 again to transfer the SU from Pick point to final destination bin and system automatically propose 010 as the final destination storage type
Hope this helps

Similar Messages

Stock transfer using PICK LIST / PULL LIST

Hi Friend,
We have two storage locations in the plant say 1000 - Main store which is ware house managed and 2000 - Production storage location.
The goods issue needs to be done from production storage location 2000. How to transfer the material from 1000 - Main store which is ware house managed to 2000 - Production storage location using PICK LIST / PULL LIST concept.
Kindly give the solution.
Regards,
Narendra Bora

Hello Madhu,
If you can suggest me as well. I am moving the goods to production storage location from raw material storage lcoation,
While executing the MF60 it creates the reservation and display log
RMPU     stock transfer reservations 00000412 22.03.2010 created successfully
But does not move the goods using 311 movement type and stock is still in the raw material storage location.
2ndly in MMBE, if i found the stock in Produciton location, it shows me
Reserved                     20.000
GR blocked stock         20.000
Rcpt reservation          20.000
If you can enlighten me in this area please, Would it move the stock or I need to make some other steps also.
Regards,
JPS

Issue on complete stock removal

Dear All,
I am configuring WM in my test system.
Can anyone tell me what are the settings reqd for complete stock removal from a storage type so that the extra qty is returned to the source/destination storage bins when I create a TO against a delivery.
I tried the following assignments but its not working.
1. Shelf Storage type (which is my source storage type) I have ticked the Full stock removal as well as return to same bin indicator. (Since SU Mgmt is active for the storage type).
2. Assigned a Return Storage type & bin in 601 mov.type.
Note:
System is picking the full Qty in TO only if I tick the overdeliveries indicator in 601 mov.type. Why ??
With the above assignements system is neither displaying the Return storage type & bin which I mentioned above nor my source storage type (shelf Storage) when I create a TO against a delivery.
Please advice how to solve it.
Hope its clear.
Regards,

See as I mentioned above if I tick the return to the same storage bin in my source storage then system will remove the complete quantity from the storage bin irrespective of delivery qty when I create a TO using LT03. But the quantity which will be displayed at the time of TO creation will be the delivery qty & the remaining qty will be blocked for removal till I confirm this TO using LT12. Right ??
As I mentioned before:
A) "Return stock to same bin" > Yes, the SU will be blocked for stock removal and the TO quantity is the delivery qty (not the qty of the whole SU)
B) The difference of whole SU qty and delivery qty will get to the pick point
. When will we put the tick in the Retain overdelivery field in the interim storage type (916). & whats its effect ?
because return to same bin option is mandatory if we put the full stock removal for SU managed storage types.
In case of SUM is active, the "Retain..." indicator has no meaning, because whether you use "Return stock to same bin" indicator or pick point.
("Return stock to same bin" is not mandatory in case of SUM is active, other option is pick point.)
2. Do we use the return storage type & return bin in the mov.type - 601 & also the return Storage type in the storage type master only incase of Non-SU Managed Storage types, If not, when will these fields come into picture incase of SU Managed Storage types.
To be more specific, Suppose If I assign a Return Storage type & bin in the mov.type settings or if I assign a return storage type in the Source storage type when will this be determined in LT03 ?
1. I wanted to assign "Return storage type" in case of SUM is active > I got error mesage LT088.
2. Even if return storage type was defined for the WM-mvt, it didn't have any effect in case of pick point (and it has no meaning in case of "Return stock to same bin").
Based on point 1&2 I think these settings are not applicable for SUM.
Regards,
Csaba
Edited by: Csaba Szommer on Mar 22, 2009 9:02 PM

Large/Small quantity stock removal vs partial stock removal.

Hi All,
I am trying to get following configuration in place: Stock removal A (partial pallet) with Full stock removal "Checked" and return the unused stock to storage type mentioned under "return storage type". But I am getting following error "For Compl. Stock removal or SU managed, either pick point or return to same bin). But if you see the SAP documentation it allows this configuration. My 2 storage types which I am using have SU & non-SU managed with putaway strategy as "next empty bin" as we don't know what are the weight or quantity restriction on each rack location for now.
My second config issue is related to usage of stock removal strategy M (large/small qty). Like mentioned above I have to area; SU & non-SU managed. And I would like to use F (FIFO) strategy for non-SU managed inventory and use M for SU managed inventory with an option of checking if the quantity is higher than SU, pick the remaining small quantity from non-SU managed place. Can I acheive with different stock removal at storage type level; one with M and another with F or do I need to have M.
Let me know if more clarity is required to provide responses.
Thanks.

Hello,
For 1:
Partial picking can be done on a SU with the usage of a pick point . The pick point is a place where materials are brought and moved for a partial pick up from an SU. In the std system storage types 010 & 011 have been defined for the same.
you may refer to the following link: Partial pick using a pick point and how you carry out with SU's invloved.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/c6/f85c504afa11d182b90000e829fbfe/frameset.htm
For 2:
When you want to use M as the stock removal strategy, the following needs to be done:
1) You define a "small" storage type where only a limited quantity can be removed. ( the control qty in the WM2 view of MM)
2) You define a "large" storage type and this will be removing quantities above the control quantity limit
3) Define the control quantity of all those materials that you want to be picked from the small storage type. (This could probably correspond to your SU qty, )
you need to have the smaller storage type set as "M " and when you are customizing search strategy for the storage types ( SPRO> LE>WM--> Strategies >stock removal strategies> Define strategy for large/ small qty, you can then define the first storage type for E as smaller storage type and then the larger storage type i.e. the second one should be higher than the preceding one.
Please see if this helps.
Thanks,
Edited by: Abhijit Sadhu on Jun 24, 2009 4:58 PM

Full stock removal functionality for 201 movement type

Dear Friends
I am facing one problem with full stock removal. As per my requirement, system should remove full container to staging area there
the requried qtty will remove and the remainging qtty goes to another storage type. When I post 201 movement type, system is not picking the full container.
When I observe movement type it is using dynamic bin and I changed it to static bin and I created a bin in 911 and I did the positng it picking the full container.
My question is, I chaanged in movement type and is there any impact for the same.
Regards
Raghu

Hi
The only impact I can think of is with the 'dynamic bin'setting the bin is the cost centre and with your change ALL of your Goods issues to cost centre will be in the same bin and so clearing these quantities out will not be so easy as when you create the TO to 'pick' the stock to clear it out it will not be able to pick the specific bin for the cost centre, However as all of tyhe stock is in the same 'bin' it should not be too much of an issue as it will jsut reduce the bin by the qty on the TO.
It just means that if you want to report on the stock in 911 then it will all be inthe same bin and you cannot differentiate as to which material was put there by which cost centre
Frenchy

No stock removal strat

Hello group!! can you say me how does WM work when I select the picking strategy "No stock removal strat" (blanck)?
I made some tests and it appears to take storage types and bins in an alphabetic order? Am I correct?
thanks!

Hello group!! can you say me how does WM work when I select the picking strategy "No stock removal strat" (blanck)?
I made some tests and it appears to take storage types and bins in an alphabetic order? Am I correct?
I don't think that.
If I remove the stock removal strategy and I define only that storage type in the search sequence I get error message L3 008 ("System cannot find source storage bin").
If you fill the storage type search sequence with "***", stringent FIFO will be used:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/c6/f845d54afa11d182b90000e829fbfe/frameset.htm
Regards,
Csaba

WM: stock removal strategies

HI all.
I include a stock removal strategy "F_FIFO" per storage type.
The thing is that when I create a TO for delivery picking or transfer between warehouses TO is created including the origin bin based on this strategy, but how can avoid to follow this strategy when scrapping, for example? Sometimes it is necessary to include manually the origin bin during TO creation or at least, necessary to be changed the one proposed?
Any idea??
Thanks!!!!

Hi,
In my opionion, you shoud try to use one of the following exits:
" MWMTO004 - "Own stock removal strategy" (FIFO strategy)
MWMTO013 - "Own stock removal strategy" (stringent FIFO strategy)"
According to SAP documentation, it is possible, to combine standard strategy with your own stock removal strategy. (look at IMG help: Logistic Execution -> Warehouse management -> Strategies -> Stock Removal Strategies -> Develop Extensions for Picking Strategies".
In order to use your logic implemented in user exit, after implementing user exit, you have to mark field "User exit active" in 'Stock removal control' section of respective Storage Type customizing.
good luck - hope it helps.
regards,
w.

FIFO STRATEGY FOR STOCK REMOVAL

Dear Experts,
I have problem, I have assigned FIFO Stock Strategy for Stock Removal in all storage types, but I am facing problem when we recieve sales return (with reference to old sales order), our company wants that the removal of old sales return to be done first by system automatically, please confirm, how to achieve this.
Please help urgently.
Regards
Ishu

Hi
FIFO works on the GR date against the quant
You can use LS22 to 'change' the quant and in there you can change the GR date
The issue is that because you receive the stock in on say 01.03.2011 that becomes the GR date even if the stock is 6 months old
Therefore changing the GR date to say 01.06.2010 (or earlier than your existing stock) itmeans that it will get picked earlier
I hope that this helps
Frenchy

Stock removal issue

Hi Experts,
To make a finish product of hose i need to pick different components as per order. In that I need to pick a hose for example : 50 EA. If I see physically in storage type I can get 50 EA, greater than 50 EA and less than 50 EA but for example if 100 EA placed in bin earlier than other pieces.
When the user looks for picking 50EA of hose it is giving him 100 EA hose because of FIFO rule , then user to cut the hose and use only for 50 EA. But, we need to make efficient pick I mean system should have picked 50EA because it is available in bin.
Can you please suggest what is the best pick rule to make the efficient pick ? Using EWM 7.0 version.
Thank you in advance.

Hi Juergen,
Thank you for your reply. Already defined unit for HOSE product is only EA in system, i don't see any
unit with meter or inches in stock removal table sort fields. Can you please suggest me what should i
do for this case now? I dont have idea on this to define new rule.
Thank you in advance.
Thank you...
Sridhar

WM - Stock Placement and Stock Removal Strategy

Hi Gurus
Need yr expertise..
What would be the ideal stock placement strategy if need to store standard pack in one location and partial quantity in another location?
example:
standard pack for material A is 100pcs
if GR 250 pcs, TO need to be created for 200pcs at location A (since it is standard pack) and
50pcs at location B (sicne it is partial)
The same logic aplly for stock removal strategy. If customer order of 200pcs, system need to pick
from location A (since it is standard pack). If customer order 50pcs, system need to pick from
location B. What will be the ideal stock removal strategy?
Please advise
Rgds..Sanjay

yu can make use of the small/large stock removal strategy and for the concerned material in WM 2 view you can give the control quantity like if the requirment is of >200 pc then storage type 0002 should be used to pick the goods otherwise if required quantity is less then system should search for storage type 0001
this is a standard strategy

Changing stock removal strategy

Hi All,
I need to modify the source storage bin during stock removal such that the TO is created from fixed bin even when its stock is zero.I was using exit EXIT_SAPLL03A_009 for the same.But it gave me 'Quant overflow' or 'Storage unit error'.
I also tried EXIT_SAPLL03A_005 but even this doesn't seem to work as I cant find data to append in t_qmat table.
Can anyone help? its urgent.
Edited by: Jaya Singh on Mar 24, 2008 5:31 PM

I think that you will need to accomplish this by using user exit EXIT_SAPLL03A_005 for picking - it's this include: ZXLTOU07. This should be fairly easy considering your requirement.
You will sort your bin candidates by available qty (field verme) in them (ascending), and then pick from the first bin. The system will loop through this user exit until entire quantity is picked.
The table you need to influence in this exit is t_qmat.
But.. I don't think your requirement will be the best solution (except if you pick less than full pallet in 99% of the time). This is because you will never get to pick full pallet quantity from full pallets.
E.g. You always want to pick from partial pallets => You will pick until you pick all the partial qty in warehouse for the material. But, it is sure that you will not have the exact qty in partial pallets, so most probably and I'd say most certainly you will have to pick the rest of the qty from full pallet.
It practically means that you will always have partial pallets, and if not you will create them by your picking strategy.
But if this is what you want it can be easily accomplished by user exit mentioned above...

New stock removal strategy

Folks,
This is the scenario, We have 2-3 pallets in a single storage bin.The bin is like a deep rack in the warehouse.
So the logic would be to use the Last in first out strategy to pull out the pallet which is outside/first one reachable to the user.
So LIFO basically works on the actual TO creation time so in case a TO for P1 is created on 01/01/01 at 12:00 PM and another TO for P2 on 01/01/01 at 12:01.The proposes the pallet created at 12:01 to be picked when there is stock removal.
But the scenario is like though the TO for P2 is created first at 12:01 and it is confirmed at 12:15 and the next one P1 at 12:16 so the pallet P2 will be placed inside the bin and P1 will be placed outside/reachable to the user.
But when LIFO kicks in for automatic TO creation it will propose p2 as the To was created at a later time but the user will pick P1 as it is the nearest reachable to him so when he tries to confirm the pallet at production the system says that the wrong pallet from what was proposed was picked.
Is there any enhancement we can use to build this custom stock removal strategy.

Hi,
Just querious on TO confirmation time...why it is confirmed differently? Will immediate TO confirmation (after TO creation) creates any issue to putaway process into Rack?
If don't want immediate TO confirmation...you can manipulate the picking of pallet through user exit MWMTO004 Own stock removal strategy (EXIT_SAPLL03A_005) to change the sorting of records on TO confirmation date and time instead of TO creation date and time.
Hope this will help.
Reg,
Sudhir

Stock Removal Strategy - Enhancement MWMTO004

All;
I am making changes in the exit EXIT_SAPLL03A_005 (Enhancement MWMTO004 ) for our own stock removal strategy. When i populate the internal table T_QMAT with the stock and bin details, there is a problem.
I have the following sequence in T_QMAT.
Bin(LGPLA) Total Stock(VERME) Stock to be Removed (AUSME)
A 100 50
B 34 34
When the TO is created, it is taking all 84 from Bin A and Bin B is not all consumed. My Removal Strategy at config is "F".
Any light shown on this discrepancy is greatly appreciated.
Thanks!!!!

I think that you will need to accomplish this by using user exit EXIT_SAPLL03A_005 for picking - it's this include: ZXLTOU07. This should be fairly easy considering your requirement.
You will sort your bin candidates by available qty (field verme) in them (ascending), and then pick from the first bin. The system will loop through this user exit until entire quantity is picked.
The table you need to influence in this exit is t_qmat.
But.. I don't think your requirement will be the best solution (except if you pick less than full pallet in 99% of the time). This is because you will never get to pick full pallet quantity from full pallets.
E.g. You always want to pick from partial pallets => You will pick until you pick all the partial qty in warehouse for the material. But, it is sure that you will not have the exact qty in partial pallets, so most probably and I'd say most certainly you will have to pick the rest of the qty from full pallet.
It practically means that you will always have partial pallets, and if not you will create them by your picking strategy.
But if this is what you want it can be easily accomplished by user exit mentioned above...

Stock Removal Strategy-A

Hi,
I am using Stock removal strategy as A-Partial Quantities for one of the S.Types. I have the stocks like this.
Bin A- 10
Bin B- 20
Bin C- 30
When picking for a TO of 100, it is picking from Bin B and Bin C. My question is according to Stock Removal Strategy A, I thought it is supposed to pick 10 from Bin A, 20 from Bin B and 70 from Bin C. Isn't it?
Are there any other settings that I need to maintain in order to make sure it picks the partial quantities to make sure we are freeing up the bins with less quantities?
Thanks for all the replies...
Venkat

I think that you will need to accomplish this by using user exit EXIT_SAPLL03A_005 for picking - it's this include: ZXLTOU07. This should be fairly easy considering your requirement.
You will sort your bin candidates by available qty (field verme) in them (ascending), and then pick from the first bin. The system will loop through this user exit until entire quantity is picked.
The table you need to influence in this exit is t_qmat.
But.. I don't think your requirement will be the best solution (except if you pick less than full pallet in 99% of the time). This is because you will never get to pick full pallet quantity from full pallets.
E.g. You always want to pick from partial pallets => You will pick until you pick all the partial qty in warehouse for the material. But, it is sure that you will not have the exact qty in partial pallets, so most probably and I'd say most certainly you will have to pick the rest of the qty from full pallet.
It practically means that you will always have partial pallets, and if not you will create them by your picking strategy.
But if this is what you want it can be easily accomplished by user exit mentioned above...

Storage section check indicator -- ID & Pick point

Dear Gurus ,
1. I have defined new storage type with NO storage section check. then maintained material with storage type indicaor.with storage type search strategy only.
in this case the system does not suggest the bin or even storage type.
But if i maintain the storage section indicator & section search strategy then the system proposing Bin while creating TO.
Then what is the use of deactivating the storage section check while defining the storage type??
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
Is it mean that the perticular material from storage type can be only picked or putaway from the
storage type that is assighned ID or pick point?
If yes in which scenario it will be utilised or how it works?

What are the other influencing factors you have set for your storage type search? For example stock status, WPC? Activity - E or A or 2-step?
2. Can anybody explain me what is the ID point storage type & Pick point storage Type.
See here for ID point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f846b74afa11d182b90000e829fbfe/frameset.htm
and here for Pick Point:
http://help.sap.com/saphelp_erp2005/helpdata/en/c6/f847124afa11d182b90000e829fbfe/frameset.htm

Stock Removal using Pick Point

Similar Messages

Maybe you are looking for