Supervisor Desktop on XP using VMware

Is there anyone that has installed Cisco Supervisor Desktop on XP in a VMware environment???  We have it installed and the supervisor logged in but we have no views for agents and no queue data.  Works elswhere on non-VMware machines. Thanks.

Hi Chris,
Of course I am sure you already know that installing CAD components or any component for CCX on a VMWare image is not supported, but that said, I have it setup in a lab environment and don't really have any issues like you describe.  Are you able to login to Agent and get that to work on this vmware XP system?  When logged in as agent do you still see nothing in Supervisor?
You can look at this guide and see if it is helpful in troubleshooting the issue:
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
Please let me know if this is is helpful and if so please rate this advice!
Mike

Similar Messages

  • Supervisor Desktop deployment - desktop shortcuts

    I am attempting an automated install of Supervisor Desktop 8.5 using the MSI on Windows 7 and XP. When I install it, I would like desktop shortcuts to be created automatically on the Public Desktop (All Users). Is there a command line switch or parameter for that, or how would that be accomplished?

    You cannot add columns but you can hide them in the Preferences window.
    This already exists in the Oldest Contact column. The first number is the contacts waiting, the second number is the amount of time the longest contact has been waiting. E.g: 5 [00:08:00] indicates five contacts are waiting and the longest wait is eight minutes.

  • Voice Monitoring Using Cisco Supervisore Desktop issue.

    Hello all.
    I have a probelm, I prepare for a demo and my demo contain that CUCM7.0+UCCX7.0 with premium license+ Cat2960+ 7911+7940
    When I try to perform a call monitoring from the CSD the message appeare to me and say" The Cisco Supervisore Desktop dont recieve any voice ".
    theis appeare either with SPAN configuration or without it.
    what could the problem be?

    Hello Ahmed,
    One question, what kind of monitoring are you traying to configure, desktop base or SPAN bwese??
    These documents will help you with both configurations:
    Desktop Base
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008075025a.shtml
    SPAN base
    http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_tech_note09186a00801a62a8.shtml
    HTH
    Please rate this post if was helpful
    Walter Solano
    CCVP, Cisco UCCX Specialist
    Cisco IP Communications Express Specialist

  • Agent disappearing from Supervisor Desktop

    Greetings -
    Can someone help find a solution to my below problem..
    Environment:
    Cisco Unified CCX premium
    9.0.2 SU2 version
    Agent desktop: 9.0(2) (Premium); Build: 9.0.2.2021
    Problem:
    We have three agents out ten who regularly disappear from supervisor desktop.  I opened a TAC case with Cisco but could not figure out what is causing the problem.  The agent desktop is installed on Win7 64bit, Kaspersky antivirus and no firewall between UCCX and agent.  Between UCCX and agent, we have a Cisco 4500 connecting 6500.  I also opened a case with Cisco switching team to check if switches have any role in agent disappearing, but nothing was found on the switches.  It is interesting that only three users are affected out of all.  The affected users' logs on to CAD without any issues in the beginning of the shift, however, after couple of hours i.e. around 11 am agents start to disappear from the supervisor desktop.  After the agent disappears, the CAD chat windows appears like below and the <Unavailable> status in the chat windows changes constantly every 10 seconds to <Initializing>
    The UCCX capture shows the following:
    <AGENT_DESKTOP_user11>.  The application will be logged out.
    2014-08-20 03:09:46:249 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application <AGENT_DESKTOP_mwoods>.  The application will be logged out.
    2014-08-20 03:09:50:021 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application 
    The agent logs shows that the heart beat is sent to the UCCX but UCCX dose not receive anything.  While all these are happening, the user can still receive and answer calls, the supervisor though cannot see the user, the reports she runs displays user metrics.  However, after few hours, the agent will appears again on supervisor desktop or re logging will make the user appear again.
    Has anyone experienced this strange issue? 
    Thank you in advance.

    Thank you for prompt response. 
    What I did few weeks ago was, created a new account, assigned queues to that new account and then asked the used to use that account just to check if the issue is specific to user account.  Even then, the agent (newly created account) was disappearing. 
    I am sure if I ask the user to use the working agent account, will not have a problem.  I will have to check with the supervisor if they want to try this out.  I will update you momentarily. 

  • No teams visible in Supervisor Desktop software

    Hi All,
    All of our UCCX supervisors can use the supervisor desktop software without any problems, but one particular user just sees a blank screen and the teams drop-down menu is blank. I made sure she is a member of the proper team and has Supervisor privileges.
    I'm stumped. Any help would be much appreciated. 
    Cheers,
    Gary

    Hi Gary
    No teams in the list means either:
    1) That Supervisor is assigned sup rights, but not assigned to any teams in Subsystems/RmCm/Teams. Go into the teams the user should see, and assign the user as a secondary sup
    2) Sometimes you may have assigned the user to the teams, but it doesn't sync to the 'desktop' services. If you are sure the user is assigned to the teams, you can go into Desktop Administrator (the new web based one in 7.x) and do a forced resync, or just restart the 'Desktop Sync' service from Control Panel in AppAdmin.
    Regards
    Aaron
    Please rate helpful posts...    

  • What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

    Hello All,
    UCCX version 8.0.2.11005-20
    UCCX is running in HA mode.
    Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
    So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
    Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
    When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
    Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
    Any thoughts would be much appreciated!
    Thanks in Advance,
    Matt

    Has your problem cleared up?  Did you do anything, such as a reboot or open a TAC case?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • Supervisor Desktop Agent View

    Hi,
    I'm currently running UCCX 8 and have strange issue in Supervisor Desktop with the name display for one of the agents!
    For all the other agents the information keyed into end user (on CUCM8) for the last name, first name fields is showing correctly in desktop. However i have one agent where it is showing a completely different name to what is entered in the end user entry!
    Has anyone any ideas as to where else it could be pulling this information from or why it is displaying incorrecly for one agent yet the other 30 are correct?!
    Thanks

    The other thing to do is to download a free ldap browser (almost everyone uses the same one - version 2.8.2 of Jarek Gawor's application) and connect to the Calabrio LDAP - use port = 38983 and set the BASEDN to  o=Spanlink Communications. It will look like this for an anonymous connection:
    Have a browse through the LDAP until you find your agent. Check what is there - this is the source, and sync will just populate the source from the SQL database. This may shed some light on the problem - why it is not being updated to match the SQL DB.
    For anyone who plays with CAD at a big site, the LDAP browser is essential.
    Regards,
    Geoff

  • Cisco Supervisor Desktop - Barge and Interrupt features greyed out.

    I have a customer using Cisco Supervisor Agent and Cisco Agent Desktop. In the Supervisor Desktop, the Barge and Interrupt features are grayed out for active agent calls.
    This just started about a week ago.
    We are currently working with Cisco on an issue with Tomcat Service, but restarting it last Friday did not fix this issue.
    Any ideas?
    Thanks in Advance!

    Hi Jonathan ,
    To barge in on a call, supervisor must first be logged into Cisco Agent
    Desktop. Login on CAD and CSD by yourself and then try to barge. You can barge in only
    once on a call per supervisor.
    For example, if you barge in on a call, drop out of the conversation, and
    then attempt to barge in on the same call again, you will not be able to do
    so.
    You cannot barge in if any of the following conditions are true:
    The agent is on hold.
    The agent is on two calls.
    The agent is in a conference call.
    You are already on another call.
    In CUCM under Agent's phone, Built In Bridge must be ON and Privacy must be OFF.
    If Supervisor needs to barge in, he should be logged in to CAD and CSD both
    and it will consume 1 Agent License, if you are logged in CAD and CSD with
    same user ID.
    I hope this will help
    Regards
    Ravi

  • User is in team state but not in team summary - Cisco supervisor desktop

    We have Cisco supervisor desktop where supervisor can see user in team state but not in team summary?? Any clue why is could be happening??
    Any help is much appreciated
    Thanks!

    Hi David,
    Not sure of setting an alert but Supervisor can use "Table 17. Summary display data"
    Agents Not Ready : The number of agents in this CSQ who are currently in the Not Ready state.
    And "Table 12. Team Summary display data (cont’d)"
    Max Not Ready : The longest time the agent spent in the Not Ready state today.
    And also refer the section "Creating Supervisor Work Flows"
    Using the Supervisor Work Flow Administrator feature, you can configure your desktop to perform certain actions based on queue statistics for calls waiting and calls in queue for specified skill groups.
    Refer the below link for more information on this.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_5/user/guide/csd85ccxug-cm.pdf
    Hope it helps.
    Anand
    Pls rate helpful posts !!

  • Supervisor desktop:- Display current skill

    Hi All,
    In supervisor desktop application, i would like to know, when an agent is in talking mode, the current skill to which he is actually mapped to.
    a sample code for the same would be of great appreciation.
    Regards
    Suhas

    I'm making the assumption here that you want to display the Skillgroup and Skill name of the Agent.
    You should be able to pull out the Skillgroup object from the agent using the "GetSkillGroups" method.
    This method will return an argument array,
              Agent a = null;
                Arguments s;
                String SGout;
                Arg RA;
                CilRefArg CilRA;
                CtiOsObject ob;
                SkillGroup SG;
                int SkillGroup_Number;
                s = a.GetSkillGroups(); // Gets the Skill groups Associated with the Agent
                for ( int i =0; i<= s.NumElements();i++) / / loop through each element in case agent has more that one skill group.
                     s.GetElementKey(i, out SGout);
                     s.GetValue(SGout, out RA);
                    CilRA = (CilRefArg) RA;
                    CilRA.GetValue(out ob);
                    SG = (SkillGroup)ob;  // End result is the Skill Group Object for this element. From here you can get all the data about the specific agent's SKill Group
    This is a very rough example, the best place to get this information is in the  CTIOS development Guide
    Hope this helps a little

  • Supervisor desktop login issues

    Able to login to agent desktop but with same credentials it is failing to login to supervisor deskrop.
    Steps taken to resolve but it didn't work
    1) enabled checkbox under supervisor but it didnot work
    2) change password  
    3) deassociated user from agent team list   and re associated     
    what next needs to be doen pls suggest

    Hi Bala,
    You should use the same credentials what you have used to login for Agent in Supervisor desktop as well. If it works for Agent login, then it should work for Supervisor as well with same credentials. Agent Team list doesn't matter here.
    Hope this helps.
    Regards,
    Ganapathi.S

  • How to access Oracle Apps 11i forms using Vmware Player?

    Hi,
    I have installed Oracle Apps 11i on native OS OEL5 Server and guest OS Windows XPP using Vmware Player.Now how to access Oracle Apps 11i forms from Windows XPP using Vmware on my OEL5 Server Desktop?
    Thank's
    Regard's
    Rerry

    Hi,
    If you mean how to access eBusiness Suite from within the Virtual Machine, then you just navigate to the same URL you normally would. You may need to put the machine alias in your hosts file if you are referencing it via machine name rather than IP address.
    If you mean that you want to load the form in forms builder (for example) then you need to FTP the form from server to client (as you normally would) and then open it in your client (XP virtual machine).
    If you want to use Workflow Builder (as per your original requirement) then you need to ensure that the TNSNAMES.ora file in the Workflow Builder home has an entry for your instance on Linux, and then you should be able to connect to the database directly.
    HTH,
    Matt
    WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
    Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
    Have you read the blog at http://www.workflowfaq.com/blog ?
    WorkflowFAQ support forum: http://forum.workflowfaq.com

  • UCCX 8.5.1 / supervisor desktop instalation trouble

    Hi,
    I installed new uccx 8.5.1. After all configuration I tried install supervisor desktop. But If it tried this on my PC xp sp3, I receive this error message:
    Error 1335.The cabinet file 'Data1.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
    MSI (s) (5C:D4) [21:31:02:171]: Product: Cisco Supervisor Desktop -- Error
    if I tried install suppervisor desktop on windows 7, I receive error message: Error 2902.operation ixoFileCopy called out of sequence.
    Agent desktop and desktop administrator are ok, and I'm able made correct installation.
    Do you have some idea, how to solve it?
    Best regards.

    Hello,
    I solved my trouble. Problem was in SplkWinPcap.dll file.  I don't know why was this file wrong. I used second metod for  generation msi files and all is ok.
    MSI file has correct splkwinpcap.dll and instalation is now  working. - (regeneration from web interface uccx didn't help, but second  metod helped.)
    Richard.

  • No Service on Agent Desktop and Supervisor Desktop

    This issue was brought to our attention because the Supervisors logging into Supervisor Desktop are unable to see their agents in the team list.
    The Agent Desktop window aswell as the Supervisor Desktop show "No service" at the bottom, this is the same for all agents and supervisors on the contact centres for this particular IPCC Express cluster.
    But calls are still routing through fine, the only actual issue seems to be supervisors not being able to monitor their agents.
    All services are up and the servers appear to be operating normally.

    Yes, I can confirm that we did end up restarting our service with no call drops (I realise now that once a call has been answered, it is no longer using the CCX port and, therefore, won't drop).
    Per my post here: https://supportforums.cisco.com/thread/2081178
    ll.... I restarted the "Cisco Desktop Call/Chat Service" service in  CCX Serviceability > Tools > Control Center - Network Services.
    The service was only restarted on the Publisher (we have pub + subscriber in HAoWAN config).
    Once  the service had restarted - the publisher remained 'master' of the  service. I didn't bother to restart the sub's service at any stage.
    The service restart took about 1 literal minute total - from clicking 'restart' to cycle back to IN SERVICE.
    As part of the process, I had called into one of our contact center numbers and had an SDA take my call.
    I restarted the service while on the phone to them - they didn't get booted from CAD and the call didn't drop.
    Also  of note - another call was made into the system during the service  restart and another SDA on shift was able to take the call with no signs  of impact.
    CAD/CSD chat and also the team views in CSD started working again...issue solved.
    In  turn, agents and supervisors logged out of CAD/CSD, closed the app,  then re-opened it just in case (although I honestly don't think this was  necessary).
    I  have yet to find anything online that says specifically what this  service does (or any of the services in Network Services) in parts and  as a whole.
    I can only say that it is important in allowing Chat (clearly) and for Supervisor Desktop to be able to function at all really.
    We  didn't seem to experience any outage of any kind - so I will assume  that the consequences of service restart in this instance were little to  none.
    I couldn't say what the consequences would've been had the service failed to restart again - forcing a system bounce (yuck).
    Anyway - issue solved, hope this info proves useful to someone else!
    PS. If you're new to the whole UCCX business, CSD = "Cisco Supervisor Desktop" and CAD = "Cisco Agent Desktop".
    Also some additional interesting info per David King:
    "...here is the link to the  CAD install guide that I quoted regarding what the call/chat service  does. It also explains the other Desktop services as well. The service  descriptions start on page 11.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/cad80ccxig-cm.pdf
    Hope this helps.

  • Supervisor Desktop Browser Edition

    Hi Guys,
    I know this is probably an age old question asked many times, but I have a customer with IPCC and a complete Citrix/TS environment with dumb terminals.  I'm just wondering what other people have done as an alternative to running the supervisor desktop in in a TS environment?
    Also - I have heard rumblings about a browser edition - might this be web supervisor desktop client?
    Thanks in advance,
    Neil

    1.  Are the services mentioned actually running?  And do they have  the proper rights on CCM?  A good test of this is making sure that they  can function using the normal CAD software.
    Where are these services supposed to be running (ie. my PC, UCCX, CUCM?)
    2.   What OS and JRE versions are on the machine you are attempting to use  the BE on?  A JRE version issue can be a root cause for this behavior.
    I'm running Windows 7 64-bit and have Java version 6 Update 22 (build 1.6.0_22-b04)
    3.  Have you checked for basic connectivity (i.e. can you PING the UCCX server)?
    Check  the above, If they don't resolve your issue, then please post back with  the version of UCCX you are using and the exact URL you are attempting  to use to connect to CADBE.
    Yes, I can ping my UCCX server with no problems.  I'm trying to go the following link to connect CADBE (https:///cadbe/CAD-BE.jsp)

Maybe you are looking for