No Service on Agent Desktop and Supervisor Desktop

This issue was brought to our attention because the Supervisors logging into Supervisor Desktop are unable to see their agents in the team list.
The Agent Desktop window aswell as the Supervisor Desktop show "No service" at the bottom, this is the same for all agents and supervisors on the contact centres for this particular IPCC Express cluster.
But calls are still routing through fine, the only actual issue seems to be supervisors not being able to monitor their agents.
All services are up and the servers appear to be operating normally.

Yes, I can confirm that we did end up restarting our service with no call drops (I realise now that once a call has been answered, it is no longer using the CCX port and, therefore, won't drop).
Per my post here: https://supportforums.cisco.com/thread/2081178
ll.... I restarted the "Cisco Desktop Call/Chat Service" service in  CCX Serviceability > Tools > Control Center - Network Services.
The service was only restarted on the Publisher (we have pub + subscriber in HAoWAN config).
Once  the service had restarted - the publisher remained 'master' of the  service. I didn't bother to restart the sub's service at any stage.
The service restart took about 1 literal minute total - from clicking 'restart' to cycle back to IN SERVICE.
As part of the process, I had called into one of our contact center numbers and had an SDA take my call.
I restarted the service while on the phone to them - they didn't get booted from CAD and the call didn't drop.
Also  of note - another call was made into the system during the service  restart and another SDA on shift was able to take the call with no signs  of impact.
CAD/CSD chat and also the team views in CSD started working again...issue solved.
In  turn, agents and supervisors logged out of CAD/CSD, closed the app,  then re-opened it just in case (although I honestly don't think this was  necessary).
I  have yet to find anything online that says specifically what this  service does (or any of the services in Network Services) in parts and  as a whole.
I can only say that it is important in allowing Chat (clearly) and for Supervisor Desktop to be able to function at all really.
We  didn't seem to experience any outage of any kind - so I will assume  that the consequences of service restart in this instance were little to  none.
I couldn't say what the consequences would've been had the service failed to restart again - forcing a system bounce (yuck).
Anyway - issue solved, hope this info proves useful to someone else!
PS. If you're new to the whole UCCX business, CSD = "Cisco Supervisor Desktop" and CAD = "Cisco Agent Desktop".
Also some additional interesting info per David King:
"...here is the link to the  CAD install guide that I quoted regarding what the call/chat service  does. It also explains the other Desktop services as well. The service  descriptions start on page 11.
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/cad80ccxig-cm.pdf
Hope this helps.

Similar Messages

  • Agent and Supervisor Desktop Updates

    With version 7.x of UCCX, if we did an update to our UCCX server, the updated agent and supervisor desktops downloaded automatically the next time a user logged on.
    Last night I updated our 8.5.1 server to the latest build.  I went to run the agent and supervisor and it just gave me a message that I had to install the latest version.  It doesnt appear to auto update.  Is there a way to make that work.

    Hi John,
    Did you run the "Cisco Unified CCX Client Configuration tool " after upgrading your UCCX system. If not please run it and relaunch the CAD or CSD, they will get automatically get upgraded.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • Macupdate Desktop and Techtracker Desktop restart itself on reboot of Mountain Lion

    This is a weird problem on my MacBook Pro with Retina display running Mountain Lion.
    I have Macpdate Desktop and Techtracker Desktop software on my system to alert me on software padres. boy work fine.
    Problem thatI have recently is that even though I have quit both programs after use, and they are not running anymore. When I reboot my Mac, there's two software restart itself.
    How can I prevent this to happen? I don't  want to disable all software to resume after reboot. Just want to solve prolem with this two software. This is because I I want the Finder window to reopen on my Desktop after reboot.
    Any friend here can advise a permanent solution that work?
    I have tried to remove files that related to these two software in Saved Applicatin State folder, it help solve the problem on that reboot, but soon, he problem will start again. Not a big issue, bu simpy annoyance.
    Advise please and thank in advance.

    Hello:
    Go to system preferences>users & groups>login items.  If those two items are there, delete them.
    Barry

  • Agent disappearing from Supervisor Desktop

    Greetings -
    Can someone help find a solution to my below problem..
    Environment:
    Cisco Unified CCX premium
    9.0.2 SU2 version
    Agent desktop: 9.0(2) (Premium); Build: 9.0.2.2021
    Problem:
    We have three agents out ten who regularly disappear from supervisor desktop.  I opened a TAC case with Cisco but could not figure out what is causing the problem.  The agent desktop is installed on Win7 64bit, Kaspersky antivirus and no firewall between UCCX and agent.  Between UCCX and agent, we have a Cisco 4500 connecting 6500.  I also opened a case with Cisco switching team to check if switches have any role in agent disappearing, but nothing was found on the switches.  It is interesting that only three users are affected out of all.  The affected users' logs on to CAD without any issues in the beginning of the shift, however, after couple of hours i.e. around 11 am agents start to disappear from the supervisor desktop.  After the agent disappears, the CAD chat windows appears like below and the <Unavailable> status in the chat windows changes constantly every 10 seconds to <Initializing>
    The UCCX capture shows the following:
    <AGENT_DESKTOP_user11>.  The application will be logged out.
    2014-08-20 03:09:46:249 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application <AGENT_DESKTOP_mwoods>.  The application will be logged out.
    2014-08-20 03:09:50:021 WARN FCCS3008 Network communication error <COMM_FAILURE> sending message to application 
    The agent logs shows that the heart beat is sent to the UCCX but UCCX dose not receive anything.  While all these are happening, the user can still receive and answer calls, the supervisor though cannot see the user, the reports she runs displays user metrics.  However, after few hours, the agent will appears again on supervisor desktop or re logging will make the user appear again.
    Has anyone experienced this strange issue? 
    Thank you in advance.

    Thank you for prompt response. 
    What I did few weeks ago was, created a new account, assigned queues to that new account and then asked the used to use that account just to check if the issue is specific to user account.  Even then, the agent (newly created account) was disappearing. 
    I am sure if I ask the user to use the working agent account, will not have a problem.  I will have to check with the supervisor if they want to try this out.  I will update you momentarily. 

  • EIC Agent's and Supervisor's Profile

    Hi All,
    I have one requirement in my project where I need to create two profiles for Employee Interaction Centre.
    One for Agents, allowing only the owners of the Activities to process their request and another for Supervisors, who can process Activities created/owned by anyone.
    Could you pls help in how to go about it and what's the SAP standard.
    Many Thanks...

    Hi,
    Thanks for your reply.
    But I know that, for Agents and Supervisors we have to create two separate roles.
    My problem is, through which authorization object do I need to restict the thing, that Agents can Process only those Activities for which they are the Owners, while Supervisors can Process Activities of each and every Agent.
    What Authorization Objects and Field Values are required to implement this.
    Thanks...

  • Agent and Supervisor Desktop is in Partial service

    Hi,
    My CAD and CSD shows the status in the bottom as Partial service,when i analyse the service status by clicking on that " Agent Statistics Viewing is Inactive ". What i need to do to enable it.My environment is CME 7.0 , UCCX 7.0 with IP Communicator.
    Thanks,
    Hari

    Hey Jasper,
    Please do the following and attach the log for my review.
    On the agent desktop, go to c:\program files\cisco\desktop\config
    Open agent.cfg in notepad
    Configure Threshold=OFF to Threshold=DEBUG
    Close any version of agent desktop that's open on the computer, and relogin in. Once you are logged in and see partical service...  close the agent desktop program.
    Please attach the log file for that time period to this post.  The log file is lcoated in
    c:\Program Files\Cisco\Desktop\log
    Please confirm you are able to login and pull historical reports for the last 24 hours as well.
    Is this an HA setup for single server?

  • IPCC/UCCX CAD and Agent/Supervisor desktop on Windows 7

    Any word on when Windows 7 will support CAD for Agent and Supervisor’s?

    The product Bulletin indicates CAD will be compatible with Windows 7 in version 7.5(8)
    Cisco Agent Desktop, Cisco Supervisor Desktop, and Cisco CTI Toolkit Options
    Version 7.5(8), FCS Q1CY10
    Version 8.0, FCS Q1CY10
    However, the release notes for 7.5(8) do not show this as being compatible.  Any Ideas on when this is projected? 
    Version 8 does offer Windows 7 support.

  • Dynamic reskilling from supervisor desktop

    Hello.
    I saw in a document that it can do dynamic reskilling by administrator or supervisor. Can i asign dynamically the skills to agents from the supervisor desktop and how?
    Thanks
    Jose Luis Arango Carvajal

    Hi
    Are you talking UCCX or UCCE?
    In UCCX there is no ability to change skills from the Supervisor Desktop, but you can log into AppAdmin as the Supervisor and get a restricted view of AppAdmin which allows you to change skills (as long as you have set the 'Supervisor access to teams' system parameter to allow it).
    Regards
    Aaron
    Please rate helpful posts...

  • Firefox Sync doesn't sync bookmarks between smartphone and tablet.Works fine between desktop and mobiles.

    I have a desktop,smartphone and tablet.They all have the latest FX35.They are all signed in and connected to Sync.Sync is the latest version and it works with email and password, instead of pins.On all devices, Sync is configured to sync all items(bookmarks,tabs etc).
    When I enabled Sync on smartphone and tablet, they got my desktop's bookmarks without a problem.They appear in a folder named desktop bookmarks.All the changes reflect properly between smartphone-desktop and tablet-desktop, but, the bookmarks do not sync between smartphone-tablet.
    When I open a tab on the smartphone, after a while it appear on tablet's Synced Tabs page.Vice verse is true also.So at least some syncing exists between smartphone-tablet.
    Is it possible to create a bookmark on smartphone and have it appear on the tablet and vice verse,just like the synced tabs work ? I tried deleting the sync account and creating a new one, but I still don't see my smartphone's bookmarks on the tablet.
    It would be even better if there was an option to choose which device can override another device's bookmarks.I don't really need desktop bookmarks on smartphone, but I'm too scared to delete them.I'm afraid it will also delete them from desktop... ?
    Thanks.

    HI GeorgePeterson:
    So "new" aka "Firefox Accounts based sync" syncs desktop<->tablet and desktop<->phone but not phone<->tablet. Hmmm I actually have tested this S5<->Nexus 5<->desktop (Mac) and it worked.
    soooo the big question :-)
    # What desktop OS version (e.g. Mac OS X 10.10, 10.8, Windows (Windows 7, 8), Ubutuntu crafty codger ), what tablet and OS version(e.g. Nexus 7 2013, Android 5 Lollipop), what phone (e.g. Samsung Galaxy S5 Android 4.4.2)
    I will re-test too!
    Cheers!
    ...Roland

  • HT1766 I restored my iphone 4s from icloud, now i am attempting to download my photos to my desktop but the desktop says there are no photos to import.....please help, what do i do?

    I restored my iphone from icloud, now I am attempting to upload my photos to my desktop and the desktop is not recognizing that there are any photos at all even though i can see them in the phones photo album.  What do i do?

    you can only restore and imports  pics that are on your camera roll no photo album.

  • Cisco Supervisor Desktop show "Agent Logs - call" and "Agent Logs - state" in N/A ::: UCCX 8.5.1

    Hi team.
    The Cisco Supervisor Desktop don't show any logs in the "Agent Logs - State" and "Agent Logs - Call" in some agents.
    I restarted the Cisco Desktop Services in CCX Serviceability but the issue continue.
    I appreciate any help respect this case.
    Thanks a lot.
    ErnestoG

    Hi Ernesto,
    Did you click or selct the Specific Agent\Inbound call which is currently being handled by the Agent. From the Screenshot you have attached (first one) doesn't look like the call has been selected.
    Please select or click on that Specific Agent\Inbound call from CSD and check these values.
    Hope this helps.
    Anand
    Please rate helpful posts !!

  • What Service Restarts the Data Calculations for Cisco Supervisor Desktop and Wallboards

    Hello All,
    UCCX version 8.0.2.11005-20
    UCCX is running in HA mode.
    Yesterday we believe our UCCX Servers failed over due to a network outage between the Publisher and the Subscriber.
    So last night I restarted the "CCX Engine" to fail-back the servers, which worked just fine.
    Now today the database that our Wallboard uses is not showing any data. So I ran some SQL statements on both Servers' CLI and the Database db_cra is showing old data on the Subscriber and the Publisher is showing all Zeros. But after just looking at the Real-Time Reporting page on the Web GUI, that "seems" to be working but I'm not positive because I have nothing to compare the numbers to...
    When I try to run Supervisor Desktop, I can open the Program, sign-in, and then when I choose the "team" and then try clicking on a CSQ Name, Supervisor freezes and I get a "Not Responding" message. I thought it was just my PC but this is happening for 2 other people as well, on 2 completely different PCs so I can rule out that its the computer that is killing Supervisor.
    Is there another service that needs to be restarted in order to get this working? I tried restarting the service for "Cisco Desktop Recording and Statistics Service" and I was nervous about restarting anything else because we are currently open and our CallCenter is taking calls.
    Any thoughts would be much appreciated!
    Thanks in Advance,
    Matt

    Has your problem cleared up?  Did you do anything, such as a reboot or open a TAC case?
    Anthony Holloway
    Please use the star ratings to help drive great content to the top of searches.

  • UCCX numbers off on Agent desktop and CTIOS supervisor desktop

    Hello,
    We have a big problem with the numbers displaying on are agent desktops as well as as the CTIOS supervisor desktops the numbers are off, such as the number of call recieved at the end of the day, etc.  It seems like at certain times of the day the numbers reset back to zero and the number of calls received by an agent through the whole day are smaller than they should.  Can you please help us.
    Thanks.

    Thanks. So you are looking at real-time reports.
    1. Is this an issue with all agents or only few ?
    2. What OS they are running ?
    3. Try installing CAD on Win XP or Win 7 32-bit to see if the behavior is same ? I wouldnt recommend reinstalling CAD on their existing boxes, as few registry settings might not be removed completely & will show the same behavior. Therefore, grab a new machine with above mentioned OS & do a fresh install on it to see if it helps.
    4. Were there any OS patch upgrades taken place recently on agent machines ?
    GP.

  • CAD Agent blinks in and out of Supervisor Desktop

    Got a problem that started yesterday. Running UCCX 7.0(1)sr5 and I've got this agent that comes and goes from the supervisors desktops. Cadence is about every 2 seconds she appears then disappears.
    Any ideas?
    Thanks in advance.

    Hi Cbelcher,
    Problem
    Cisco Agent Desktop agent appears and disappears from the Cisco Supervisor Desktop.
    Intermittently Agent begins to disappear and appear on the Supervisor Desktop under Team Agent state Report.
    Solution
    This problem is caused when multiple threads do not exit correctly  under Agent desktop PC. When the CHAT communication on TCP Port 59000  and 59020 between Client and Server has been lost due to network  interruption/outage. CAD is unable to recover from this and creates  multiple Agent.exe instances.
    Exit out affected Cisco Agent Desktop application and launch CAD again.
    Reference:
    http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a008035309f.shtml
    Hope it helps.
    Anand
    Please rate helpful posts by clicking on the stars below the right answer !!

  • Cisco Supervisor Desktop - Barge and Interrupt features greyed out.

    I have a customer using Cisco Supervisor Agent and Cisco Agent Desktop. In the Supervisor Desktop, the Barge and Interrupt features are grayed out for active agent calls.
    This just started about a week ago.
    We are currently working with Cisco on an issue with Tomcat Service, but restarting it last Friday did not fix this issue.
    Any ideas?
    Thanks in Advance!

    Hi Jonathan ,
    To barge in on a call, supervisor must first be logged into Cisco Agent
    Desktop. Login on CAD and CSD by yourself and then try to barge. You can barge in only
    once on a call per supervisor.
    For example, if you barge in on a call, drop out of the conversation, and
    then attempt to barge in on the same call again, you will not be able to do
    so.
    You cannot barge in if any of the following conditions are true:
    The agent is on hold.
    The agent is on two calls.
    The agent is in a conference call.
    You are already on another call.
    In CUCM under Agent's phone, Built In Bridge must be ON and Privacy must be OFF.
    If Supervisor needs to barge in, he should be logged in to CAD and CSD both
    and it will consume 1 Agent License, if you are logged in CAD and CSD with
    same user ID.
    I hope this will help
    Regards
    Ravi

Maybe you are looking for