T430s Thinkvantage finger print software

Hey guys, How are all you
Well I use my own laptop as a admin/standard user I use my standard user account mostly. I remember on my v570 when the user access control came up i had the option and i could type the password or use the finger print. so i was wonder if their is away i could set that up on the thinkvantage fingerprint software so that when the use access control comes up when i'm on my standard user account i could swipe my finger that i use for my admin.
Solved!
Go to Solution.

Use ThinkVantage Fingerprint Software version 6.0
http://support.lenovo.com/us/en/downloads/ds036923
Although the website says it's only for Windows 8.1, actually it will work on Windows 7 as well. And 6.0 adds the feature you are talking about (version 5.9 and earlier didn't have it).

Similar Messages

Finger print software

How do I find my finger print software to register my finger print. I can see the driver is installed successfully but cant find the software itself to load and scan my finger for my files.
Secondly, my wifi is on but only showing bluetooth connection, is it the same as any other wifi connection? can I connect to any wifi around with my bluetooth connection?
Any advice will be appreciated

Hi,
by default the Fingerprint can work with some applications, but if you plan to use the Fingerprint with other applications, then I would suggest to install Client Security Solution (CSS).
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73696
After you have installed also CSS, you need to enable CSS to work with FPR.
Here is a short introduction:
- start CSS
- on the left side click on "Fingerprint" and select "Manage" -> followi the on screen instructions and get the CSS configured with FPR
- after this is done open CSS again and go to "Password Manager"-> a new window will open and go toet Preferences->Set Preferences. A configuration window will open and make sure, that you enable it for all the apps that you can see there.
- once this is done open CSS again and go to Advanced->Manager Security policies->in this new window go through each option on the left side and make the appropriate changes to it.
For a detailed instructions and infomrations I would advice to read the CSS manual:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/css83dg_en.pdf
Let me know, if you have any specific questions.
In case this helps, you can mark this post as fixed .
Cheers

Finger Print Device not found using Think Advantage Finger Print Software

3000 N100, the finger print device can not be found when trying to set up profiles. The computer had been restored to new state using the function key at startup.
I deleted programs I did not want after that but the Think Advantage was left as is, I believe. I can get as far as trying to create finger print profiles, then I get the finger print device can not be found.
I am XP SP3
E/.
Message Edited by EmClark on 05-19-2009 10:42 AM
Tinkering All The Time
E/.

Solved...I downloaded the updated Fingerprint software from the driver page and that fixed it.
Tinkering All The Time
E/.

Finger print software for hp 840 g1

i have just installed new windows 7 ultimate 64 bit on my hp elite book 840 g1. finger print sensor is already installed and in control manager it shows that driver is installed and its working properly. now i install hp protect tools security manager but it does not show me to set finger prints and nor it show any finger print sensor installed on laptop.kindly tell me which software is to install on laptop and from where i can get it in order to use finger print sensor to login windows.thanks

Please reply with current Operating System of your PC. Thank You,GBL84Although I am an HP employee, I am speaking for myself and not for HP

Client security and finger print

I recentlyy upgraded the fingerprint software to its newest release /http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73585) and since then the client security system says the finger print software is not installed. The client security works fine if i type the password. At window log on i can swipe the finger print and log on. On web browser the link between css and fingerprint does not work and i have to type the password
Finger print software 5.9.3.6581
Client security 8.30.0031
How can i re link both ?
Best regards

http://forums.lenovo.com/t5/ThinkVantage-Technologies/Fingerprint-vs-Password-Manager/m-p/281408
Lenovo T440s, 20AQ0067MC, Windows 8.1 Pro x64 UEFI, Samsung 840 EVO SSD 250 GB, 8 GB RAM
Lenovo T430s, 2356LQG, Windows 8.1 Pro x64 UEFI, Intel 520 SSD 180 GB, 8 GB RAM
Lenovo T420s, 4171-6SG, Windows 8 Pro x64 UEFI, Intel 320 SSD 120 GB, 8 GB RAM
Lenovo T400s, 2808-CYG, Windows 7 Ultimate x64

Finger Print Reader Error Code E7210005

Hi: I've just upgraded by X61 Tablet from Vista to Windows 7. I did a complete reimage of the hard drive. Installed the latest Finger Print software downloaded yesterday from the Lenovo website for 32 bit WIndows 7. No problem on install. When I try and enroll my first finger, I get an error message that says "Operation is not allowed by operating system policies. The error code is E7210005. This is an error message generated by the THankVantage Fingerprint software and not Windows 7. I need help on troubleshooting this message. I have no idea as to what operating system policies they are talking about and where it is located. I looked at the Windows Security Policy for the local machine and saw nothing that struck me as referring to this issue, but maybe I'm wrong.
Please advise and give me any suggestions. Thanks. Nile

no-one wrote:
Actually, if you read this post:-
http://www.codeweblog.com/thinkpad-t61-under-installation-win7-fingerprint-recognition-software-to-s...
It seems to be Lenovo's wonderful ability to code for a 64Bit Os that seems to be at issue here.Install a 32bit Vista thinkvantage software in a 64bit OS and it works.
no-one
Actually parts of the code you refer to are written by Upek and not Lenovo and there is a API so Lenovo and other manufacturers can create their own GUI. Lenovo didn't create the fingerprint software/drivers from scratch on their own, but part of it is actually from Upek with a API for Lenovo and others to make a customized GUI. As the article says the Windows 7 fingerprint software from Upek have the same problem.
Also skywalkr is correct about the statement that "built-in Administrator account is not allowed to use biometrics". That have to do with the new addition to Windows 7 "Windows Biometric Framework" (WBF). Since Vista don't use WBF that limitation is not in the Vista version of the fingerprint software. This has nothing to do with 32 or 64 bit or that Lenovo is unable to code for a 64 bit OS, but rather the limitation in WBF/Windows 7 like skywalkr already pointed out. Neither do i understand why you refer to 64 bit since Nile clearly stated that he/she is using the 32 bit version of Windows 7.
-gan

Lenovo finger print not working

Hi,
Lenovo finger print suddenly stopped working last week on my laptop. Further to this while looking for solution i came across the new update available on suppport and download page for my system (3000 N200 0796) (http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67845).
I unintalled the lenovo finger print software and intalled a new one from above update link.
But still its not working. When i open the finger print reader i get a message saying "Failed to open the sensor" and when i try to access it via client security solution i get message saying "device is not installed"
Further to above i checked the device manager and there is no option for finger print. I thenk checked BIOS and found that under security option ther is also no option of finerpring..!!!
I think deleting the old software completely and downloading was not a good idea..
Does anyone know how to get the fingerprint option back into bios??
Message Edited by Dhaval on 22-05-2009 03:48 PM

Hi,
I haven the same problem once I uninstalled Vista and installed XP SP3.
I was able to resolve this by following way:
1. I found in the device manager "AuthenTec Inc." device under the Universal Serial Bus controllers.
2. I opened this device and pressed the "Update driver" in the 'Driver" tab; then I installed the driver for the fingerprinter.
3. As result, the system recognize this device as Personal indentification device; and fingerprinter works properly.
Please let me know if this was helpful.

Portege R700 Finger Print Reader suddenly not recognised from OS

Hello,
I have been searching for a solution
My R700 on Win7 was working flawlessly using the finger print scanner. At some point without any reason the
hardware (finger print reader to login) was not recognized by the OS anymore.
- I tried to remove the driver software, reinstalled it
- updated it and so on resulting that the hardware was not found.
- I even removed all relevant entries from the registry - no go.
- the Authentic Finger Print software starts up, but only giving an error that the FP-reader is not present.
Is there a way to remove the stored fingerprint manually by deleting the manually.
The hardware is working according to the support. (Machine was send in)
However I do not wish to re-setup the entire machine (it is a business notebook) just to get this to work?
Any hints or step by step intro to achieve this?
I could not find a descritpion on how to remove fingerprints (cause I suspect that is the problem) manually since the software to do this does not start up.
Any input would be appreciated.
Best regards
julian

If you don't see the fingerprint hardware or unresolved devices in Device Manager then the device is either disabled in the BIOS or the fingerprint sensor is faulty or loose, or there was a liquid spill causing corrosion.

Portege R600-10Q Finger Print Utility not recognizing prints

I have a Portg R600-10Q laptop which has been upgraded to run Windows 7 Professional (32bit) using the Toshiba supplied upgrade disks.
Recently the finger print scan became unreliable so I followed my usual practice and removed the old finger prints and set about rescanning my fingers.
I find that there are three scans required for each finger. When I scan the first two times the print is immediately recognised and graded 'Good'. However, the third attempt always fails and will scan up to 8 times and then the process is terminated. This happens regardless of which finger is involved, restarting the machine, running the utility as an administrator etc.
I uninstalled the Fingerprint Utility and then reinstalled but the same issue remains.
I'd value any suggestions for getting the Fingerprint Utility working again.
Andrew

> I uninstalled the Fingerprint Utility and then reinstalled but the same issue remains.
Did you use the newest finger print software?
Please do this.
Please try the fingerprint software released for Portege R700.
There is new version which is released for Win 7 32bit and 64bit OS
PS; you should delete all fingerprints before installing new version...
Bye

Finger print sensor and SimplePass Software is not working

Hey there,
I have a HP Pavilion dv7-6c95dx and the finger print sensor and SimplePass Software is not working. I am unable to find the relevant drivers/etc from the HP website. Any advise would be appreciated. The device was purchased in the USA.
Thanks.
This question was solved.
View Solution.

Hi:
I believe this driver from the dv7t-7000 will work as well as the security software to register your fingerprint.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103013-1&cc=us&dlc=en&lc=en...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-117897-1&cc=us&dlc=en&lc=en...

My finger print reader for dv6-3025dx is not working: can i fix it by redownloading the software?

I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

I was asked to download the Digital Persona Finger Print Reader for Consumer NB for my dv6-3025dx Windows 7 notebook and after that my fingerprint reader stoped working. The status has an "X" rather than a check mark, I tried redownloading it but if failed again. Is there any other way I can fix it? Thank you

I lost my finger print login

I have been using finger print login since I set up my T430s a few days ago and all of a sudden I could not log in using it? At login I get "No attempts to start the service have been made since the last boot". What has happend and how do I correct it?

Can you still log in with password?
Can you run ThinkVantage Fingerprint software (the utility you used to enroll fingerprints)? Does it work?

Finger print reader not working - file PSQLPWD.DLL

Hi,
I need some help, I run an spyware and detected the file PSQLPWD.DLL and renamed it as PSQLPWD.DLL.VIR.VIR and deleted it. After that I was not able to use th finger print reader. I read that that file is part of the is part of Thinkvantage longon that belongs to thinkadvantage fingerprint protector. I believe i need it in order to use again my finger print reader. Please correct me if i'm wrong about my thougts. if it is true, how can i get that file back (it has been completely removed from my system)?
Thanks

Hi @Toker ,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that after upgrading to Windows 8, you fingerprint reader is not working.
I would be happy to look for updated drivers for you, but I will need your exact model of HP HDX18 Notebook PC you have. Is your Windows 8, 32 or 64 bit?
How Do I Find My Model Number or Product Number?
Here are some links that may assist you in the meantime.
Downloading or Updating Software and Drivers for HP Computers
Software Does not Install or Work Correctly (Windows 8)
Have you tried running The HP Support Assistant to aid with HP updates and resolving issues?
Have you tried Using Automated Troubleshooting (Windows 8) to aid you?
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

T60p - Finger print reader no longer loading on boot up or screen saver

My laptop has been working great for over 1 year.
When it boots up, it normally boots quickly to the windows logon screen and the finger print reader is available
and if I use my finger, it will logon to PC.
With in the last week, at boot time, I got some message about "netware?" during boot up which I had never seen before.
I just pressed enter and continued.....but
Now the laptop boots to a black screen and has the windows logon....no finger print reader is available.
After I logon on, then the PC takes over 10 minutes to boot.
If I leave it long enough eventually my desktop appears.
A quicker way around is to put it in hibernation mode, then instantly wake it up....the desktop appears.
Anyone know what may have caused this?
How can I get it back to the way it was?
Thanks in advance for any help!

Hello,
if Zone Alarm is installed, please uninstall it. It can cause problems.
Another way is to uninstall the new version of fingerprint software and install the old one.
If you don´t have a clean install the old version is in c:/SWTools on your hdd.
And try to don´t update anything, when your machine works like designed.
Regards
Andreas
Message Edited by Agotthelf on 10-04-2008 07:11 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

T400 2765-T6U -No Audio or finger print reader With Windows 7

I installed Windows 7 and can't get either the audio or the finger print reader to work. I have loaded the software, but still can't get it to work.
moderator note: model number added to sbject line for clarity.

Hello Rsmi51,
please download and install Lenovo System Update.
It will automatically find, download and install all of your necessary software.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

T430s Thinkvantage finger print software

Similar Messages

Maybe you are looking for