Tax to be posted both to material account and separate account

Dear all,
My client wants vat to be added to material cost and he wants to post to separate account. How can we process this.
When i take the acct key NAV it is going to separate account only
and if i take it is adding to material cost .But both are not happening at the same time . How to overcome this.
Thanks in advance
regards
vithal

Dear,
make a Z condition for that VAT.
make Z account key
assigne G/L account to thast acccount Key.
DONT ASSIGN Z condition OF VAT IN CLASSIFY CONDITION TYPE
Just try this out , m not sure but it will solve ur problem of inventorising the VAT as well as passing it to some diff account.
But the same will be inventorised at the time of MIRO only.
DONT FORGET THIS IS THE WORK AROUND SOLUTION NOT THE STANDARD PRACTICE
regards,
SNB

Similar Messages

  • TRM - Post both to group ledger and secondary local ledger

    Dear All,
    While executing TBB1, in order to post  the commercial paper paper to accounting , I noticed that it is going to only one ledger.
    The group ledger, does any one know how to post both to secondary  local ledger and group ledger please.
    Thanks in advance,
    Daniel

    Hi Daniel,
    can you clarify what you are expecting by way of Group Ledger and secondary local ledger with an example.
    TBB1 will be supported for posting at two level @ Customer Level and GL Level. This can be performed for multiple valuation area if required.
    Regards
    Prasad AV

  • How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

           how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

    Decide which iPhone will be keeping the current iCloud account.  On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll.  If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
    Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account.  (This will only delete the account from this phone, not from iCloud.  The phone that will be keeping the account will not be effected by this.)  When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone.  Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom).  Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge.  This will upload the data to the new account.
    Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

  • Include both entire feature presentation and separate chapter clips?

    Let me state up front again that I'm completely new at this. In my first project I wanted to include a "Scene Selection" menu with animated video buttons, but I could not see how to link the buttons to each chapter using just one long clip as the feature movie. So I created separate clips of each chapter and linked to those. Which worked great. I read another thread here where the guy said he always includes his feature broken up by chapter, so I linked each chapter to the next chapter and the last chapter back to the main menu. It works ok, but there is a long lag between one chapter ending and the next one starting. It doesn't really play smoothly like one long movie.
    So, my long winded question is, do you all include one Feature Presentation clip, and separate chapter clips if you want to use video buttons in a scene selection menu? That's like including the movie twice, a waste of space, isn't it? How would you guys link a video button to a chapter in a feature movie clip when it's all one clip?

    Now, I normally edit with a slightly different workflow, and have each Sequence (in PrPro) as a separate Timeline, rather than a long Timeline with Chapter Markers, but for your use, I'd link the Buttons in the Scene Selection Menu, to the various Chapters. Then, for your Play All, just do a Chapter Playlist and set the order, as required, for that.
    In my case, I link my Scene Selection Buttons to each Timeline, and then do a Playlist (not a Chapter Playlist, but similar) for my Play All.
    As for your Motion Buttons, I would think that you can choose the proper Chapter Marker and then select the Motion Thumbnail in each Button's Properties>Motion Panel. Maybe I'm wrong, but then I do not use Chapter Markers that often, so am NOT the best source of info on them.
    Good luck,
    Hunt

  • Activating Direct Posting to G/L Accounts and Material Accounts

    Hi,
    Can anyone plz tell me with some examples ,what is the relevance of this ,'Activating Direct Posting to G/L Accounts and Material Accounts'.
    Link for this is as below :
    spro/Materials Management/ Logistics Invoice Verification / Incoming Invoices / Activate Direct Posting to G/L Accounts and Material Accounts
    Whether normally everyone will use this or not ?
    regards,

    Sandeep
    In Logistics Invoice Verification, you can also post invoices that do not refer to a purchase order or a delivery. A typical example of this is a bill for expenses.
    As in the case of an invoice with a reference, you first need to enter the header data and the vendor information.
    In contrast to invoices with a reference, the system does not display any proposed values for the invoice items, since it cannot determine any purchase order items and posted goods receipts for this invoice. As a result, the system does not know which accounts are affected by the offsetting entry for the vendor line item. Therefore, you must specify which accounts the amounts are to be posted to. The SAP System provides the following options:
    • Posting to a G/L account
    You post to G/L accounts if you, for example, want to settle small amounts for freight costs and similar items and do not want to add these to the material accounts or cost accounts for the invoice items.
    • Posting to a material account
    You post to material accounts, if you, for example, want to debit or credit a material without using a purchase order reference
    You can also combine these options by generating the relevant posting lines one after the other, or by generating lines with reference to a purchase order.
    When you enter an invoice without a reference, you may find that a vendor has not been created in the system. You can post this invoice to a one-time account.
    You can have activated this functionality if you want to post directly to GL account and material.
    Hope this clarifies
    Thanks & Regards,
    Sridhar

  • MIRO - deactivate direct posting to GL / material acct for selected company codes

    Hi All,
    I have a requirement to deactive direct posting to G/L and material accounts in MIRO, however, only for selected company codes (this cannot be done for all of them on client level in SPRO->Material Management->Logistic Invoice verification->Incoming Invoice -> Activate direct posting to GL/ Material accounts).
    The thing is that for those company codes, MIRO posting has to be made always with Purchase Order Reference.
    My idea is to build simple validation rule:
    if company code is equal to (SET) and Purchase Order Reference is empty then error message should appear: "Posting without PO reference not allowed"
    I was also thinking on creating own layout in MIRO and assign it to clerks which are responsible for posting in those company codes.
    Can you advise on that, please?
    Best regards,
    Lukasz

    Hi Tejas,
    Thanks for your reply.
    Answering your questions:
    1. The thing is that these GLs are being posted with other transactions.
    2. My concern is that after the document is parked and while editing user will delete PO reference, it can be any GL account picked in "GL tab" of MIRO transaction. My understanding is that I should put tick on "Post automatically only" on all the GL accounts which users are able to use (correctly or not) in that case.
    My aim in this configuration is to restrict those posting in such way that users are not allowed to use them - and this is only in regards to MIRO transaction.

  • CO11N can not post the backflush material properly

    Dear Gurus,
    When I use CO11N to post a Backflush material, the system returns error logs " No stock posting possible for this material".  Aside the warning and confirm straghtly, then I use COGI to post this error backflush material, It post successfully without any warnning message.
    (PS: I have checked my material type in OMS2, the parameter was right. And I can use MIGO_561 to post this material.)
    Why the CO11N can not post the backflush material properly, and then can be COGI properly ?
    Thanks in advance for your kindly help.
    BRGs
    Sivan

    Sivan,
    This is due to missing entry in a customisation table T158.
    Call Transaction SM30.Enter view 'V_158_ALL' for field 'Table/view'.Consider the entry for Transaction CO11 as a template and adjust the entry for Transaction CO11N correspondingly so that both entries are identical.Afterwards table T158 must be transported from the Customizing client into the other clients.
    Regards,
    Prasobh

  • Activate Direct Posting to G/L Accounts and Material Accounts

    under configuration if we tick on "Activate Direct Posting to G/L Accounts and Material Accounts"
    then what would be the impact?
    Thanks & Regards
    Nitin Gupta

    Hi
    When u tick "direct posting the material"  material tab will be available in MIRO screen ( along with PO reference )
    here u can post invoices w/o reference to PO directly material account
    Check info Given by SAP
    If you have activated posting to material accounts in Customizing, you can enter invoice lines without a PO reference on the Material tab page. These lines are then posted to the given material when you post the invoice
    When posting directly to a material, no posting is made to a GR/IR clearing account. The system posts manually entered material lines directly to the stock account or a price difference account, depending on price control and stock coverage
    Vishal...

  • MIRO: Activate Direct Posting to G/LAccounts and Material Accounts

    Hi,
    To which table does the following customising write to:
    IMG/Materials Management/Logistics Invoice Verification/| Incoming Invoice/Activate Direct Posting to G/L Accounts and Material Accounts
    Thanks
    -S-

    TCULIV
    Regards.

  • Defining Accounts for Automatic Tax Payable Transfer Posting

    Dear all,
    I would like to know about accouting process of Accounts for Automatic Tax Payable Transfer Posting.
    Please give me a detail example about business that use this account
    Thanks so much
    Minhtb

    Hello,
    This scenario applies at month end.
    Say during the month you have posted payables are receivables resulting in the following balances on your tax accounts:
    Input tax account: 10.000 Dr
    Outpux tax account 12.500 Cr
    When you prepare your tax return at month end with report "Sales Purchases tax returns", it will print out all if your input and output tax transactions, detailing the total balances mentioned above.
    At the same time you can activate the tax payable posting option with help of the variant options. Besides the printout, SAP will then also automatically post the following document:
    Dr Output tax account 12.500
    Cr Input tax account 10.000
    Cr Tax payable account 2.500
    in other words, the input/output tax accounts are zero and the remaining (payable) balance is offet to a special clearing account, the "tax payable account". This account is then cleared against cash as part of e.g. bank processing when the payment is made and that ends the process.
    hope this clarifies, please do not forget to assign POINTS if this answers your question.
    Thanks
    Rene

  • Credit Memo all my material items to be directly posted to Balance Sheet account

    Hi Experts
    My client has a  scenario where for certain items they create a credit memo request document and finally a credit memo document from the VKOA system is picking the revenue bearing GL and posting all the line items to that G/L account
    Manually my customer is again checking and extracting the p/l and posting to balance sheet account
    is there a way where we can directly post these entries to Balance Sheet account
    Best Regards
    Waseem

    Hi Sanil
    Thanks for the quick reply, can we assign a balance sheet account directly in VKOA in the G/L account field or do we need to add this in directly in Provision acc field
    As suggested by you we already have the access sequence with respect to Order Reason, I am just doubtful wether we can directly give Balance Sheet account in G/L account field
    Best Regards
    Waseem

  • Tax amount is coming in GR/IR ACCOUNT

    Hi,
       I am facing one problem  in PO base price is 500,  i am using 10% service tax code in PO it is showing proper base amount and tax amount separately,  but when we make the GR  so for GR/IR accunt it is posting amount as 550  insted of only 500 as tax amount is posted seperately.
    regards,
    zafar

    Hi,
    Check your tax prcedure & see service tax condition type must be assigned with accounting key NVV, so that it is adding to material/Service account as debited as 550 & then crediting to GR/IR 550. Just change that  accounting key in service tax condition type , so that it will post to separate account
    & You can have accounting entry in MIGO as
    Material/Service Account :500(Dr)
    GR/IR  Account: 500(Cr)
    & accounting entry in MIRO posting:
    Vendor Account: 550(Cr)
    GR/IR  Account: 500(Dr)
    Service Tax: 50(Dr)
    Regards,
    Biju K

  • No tax item exists for tax code O0 in a G/L account item.

    while posting the credit memo  for sales return accounting document is not created. its shows the error as No tax item exists for tax code O0 in a G/L account item.
    plz help me in solving the issue

    Dear Venkatesh,
                  1.First check that material wether that is relevent for taxes or not.
    Check wether Tax indicator set or not in the material master Sales org data1 or 2
    2.Check condition record exists for that material or not
    3.Then check the Tax code and G/L account assignment in the transaction FTXP
    I hope it will help you,
    Regards
    Murali.
    Edited by: Murali Mohan.T on Feb 13, 2008 10:42 AM

  • Table where I have entry for material document and Accounting doc.(GR/IR)

    Hi all,
    When GR/IR clearing is done manually using MR11 t.code,a material document gets posted.
    Looking at the PO order history against the line item for which the GR/IR clearing is made,this material document appears. When clicked on material document and select the followon document, we get the accounting document.
    My question is:
    If we have to take a table entry download for all these together how do I do it.
    Usually based on the material document number from table EKBE, we are giving the same number in object key in BKPF table and obtaining the same. This is a cumbersome process.
    Do I have a table in SAP where if I enter the PO and the line item. I get the material document posted against it as well as the FI document(accounting document)
    Your inputs are highly appreciated.
    Regards
    Aravind

    Hi,
    I don't think there is a table which will have both MM and FI document numbers. The approach what you have adopted is right. If it is a regular requirement, you can develop an ABAP report for this.
    Thanks
    Murali.

  • Sync of Material document and accounting document during MIGO

    Hi Friends,
    Can we synchronize the Document numbers between Material document (WE) for GR (101) and Accounting documents created for the MIGO transaction????
    We have 50 is assigned to WE. But, we have a gap in numbers of Material document number and Accounting document numbers??? though the document type WE is common for both.
    I have seen that "Buffer" is the culprit. But, not sure how to fix that.
    Appreciate your help in this regard.
    Dev.

    When the document type is same (WE) for both, how come the accounting doc has continuous numbers and Material doc has breaks ( from buffer)????
    document type WE is same for GR for material document and accounting docu but number range are stored diffrentely.
    OMBT is where u store the number range for material document
    and this number range is assigned to group of materia doc we wf wo ww
    OMBA is where u create diffrent number range for accounting document hear U assign WE to ur transaction code and in turn WE is assigned a number range what is created in OMBA, this number range is nothing to do with number range u have created in OMBT.
    when ever u post the docunemt in system
    SAp hav efixed the document type for GR that is WE
    it goes in OMBA in the group of Material documents for goods receipts
    check what is the year and number range assigned and current number so it assignes this number first
    than it go to OMBA  cheks what is the Tcode u are using and what is document type u have assigned to that tcode and it can be any WE or what ever u have assigned to that tcode
    taking that doc type it goes and see what Number range is assigned say 50 and then checks company code and year for this 50 and get the number for accounting doc
    so i think its is clear that material and account are 2 diffrent ranges
    skiping of numbers might be due to buffer
    also go throught following post it will be helpfull
    GR NO SEQUENCE - MISMATCH
    hope this helps

Maybe you are looking for