Ui5 - eclipse "the requested operation cannot be performed "

Hey all, I have get the "the requested operation cannot be performed on a file with a user-mapped section open" when i tried to save the my ui5 works on eclipse after i close all sessions about the related sources. After app. 5 min later, it fixed.

it seems that there is no exact solution about the issue, i thought that this is about the apache session of the related application, apache thought that the session still on going although i ended it. it is a generic problem as i thought when i google it. hope that i can find an exact solution. Thanks mike.

Similar Messages

Beasrv.exe The requested operation cannot be performed on a file with a use

Hi guys,
I am trying to upgrade WLS from 10.3.3 to 10.3.5
But I got the following:
Fatal error occurring during the installation. beasrv.exe(The requested operation cannot be performed on a file with a user-mapped section open).
I search in taskmgr this proccess but it does not here.
Also restart the server and nothing. And also unzip again the patch to another folder and it does not work.
Any help guys?
Thanks in advance

Do you have a node manager (or WebLogic server) installed as a service?
These should be visible in the task manager as beasvc.exe.
To check if there are services installed, open your service environment and look for the entries
such as: Oracle WebLogic NodeManager or beasvc domain_name.

PS CS5 error message, "The requested operation cannot be performed..."

When trying to save an image under the "save for web & devices" I get this error message, "The requested operation cannot be performed on a file with a user-mapped section open." I have the latest driver on my computer. For a while I would get this message now and then, now it is all the time.

I have this problem too. It only affects Photoshop. It doesn't happen every time I try to save for web, but it happens on all kinds of files, even new files that I have created from scratch in Photoshop. Sometimes, all I have to do is create a new file and click save for web, and I get the error.
It doesn't happen if I turn off my Antivirus program - Trend Micro Titanium Maximum Security.
So I would think it was a problem with Trend Micro, but it doesn't occur with any other program and I can save files with Photoshop, unless I use the Save For Web option.

Error processing cube - requested operation cannot be performed on a file with a user-mapped section open

Hi,
We have recently moved our production servers and since the move have been experiencing an intermittent (but frequent) error when processing our OLAP cube.
The error messages presented are:
"Error: The following error occurred during a file operation: The requested operation cannot be performed on a file with a user-mapped section open"
"Error: Errors in the OLAP storage engine: An error occurred while processing index for the <Partition Name> partition of the <Measure Group Name> measure group of the <Cube Name> cube from the <Database Name> database"
I assume the second message is a consequence of the first error. The partitions and measure groups seem to vary each time the process is run.
It appears from similar threads that this is usually caused by backups or anti-virus applications locking the files that Analysis Services is using the process the cube. I have ensured that there are no backups running at the time of processing and
I have disabled anti-virus programs without success.
I have also created a new version of the cube (using the deployment wizard) which deployed without error but then encountered the same error when processing for a second time. There was nothing (client application wise) using this cube when it failed
to process.
As I mentioned earlier, this problem is intermittent. Sometimes the cube will successfully process but usually it fails to process.
We have not encountered this error in our previous production environment or in any of our development environments.
Has anyone encountered this problem before? Any suggestions on possible solutions?
Thanks
Rich

Hi jonesri,
I think you can try to use SSAS Dynamic Management View to monitor SSAS instance, such as existing connections and sessions. For example, please run the following MDX query:
SELECT[SESSION_COMMAND_COUNT],
[SESSION_CONNECTION_ID],
[SESSION_CPU_TIME_MS],
[SESSION_CURRENT_DATABASE],
[SESSION_ELAPSED_TIME_MS],
[SESSION_ID],
[SESSION_IDLE_TIME_MS],
[SESSION_LAST_COMMAND],
[SESSION_LAST_COMMAND_CPU_TIME_MS],
[SESSION_LAST_COMMAND_ELAPSED_TIME_MS],
[SESSION_LAST_COMMAND_END_TIME],
[SESSION_LAST_COMMAND_START_TIME],
[SESSION_PROPERTIES],[SESSION_READ_KB],
[SESSION_READS],[SESSION_SPID],
[SESSION_START_TIME],[SESSION_STATUS],
[SESSION_USED_MEMORY],
[SESSION_USER_NAME],
[SESSION_WRITE_KB],
[SESSION_WRITES]
FROM $SYSTEM.DISCOVER_SESSIONS
Use Dynamic Management Views (DMVs) to Monitor Analysis Services:
http://msdn.microsoft.com/en-us/library/hh230820.aspx
In addition, you can aslo use SQL Profiler to capture some events for further investigation.
Use SQL Server Profiler to Monitor Analysis Services:
http://technet.microsoft.com/en-us/library/ms174946.aspx
If you have any feedback on our support, please click
here.
Regards,
Regards,
Elvis Long
TechNet Community Support

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be perfomed on a file with a user-mapped selection open'.

When I try and Save for Web in Photoshop CC I receive an error message saying 'The operation cannot be completed. The requested operation cannot be performed on a file with a user-mapped selection open'. This happens with any of my files not just one in particular...
Can anyone help solve this please?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Event Log Error: Microsoft.ResourceManagement: System.Data: System.InvalidOperationException: The requested operation cannot be completed because the connection has been broken. at System.Data.SqlClient.SqlInternalConnectionTds.ExecuteTransaction

Has anyone ever seen this? Any Clues?

I had set up a clean environment some weeks ago, and just today I started configuring MA's. When I got to the FIM MA I wanted to do an import, sync and export, and when I got to the export it seemed to run endless. In the eventlog I got the same errors as
you did.
Didn't find any real hints in SQL or in the FIM requests history... After doing a good old reboot it just started working...
http://setspn.blogspot.com

Error 58 The specified server cannot perform the requested operation

Hello,
I will try to explain the situation as brief as possible. Next to our current existing MDT environment (MDT2010 on Windows 2008 R2) we are no building a new system (MDT2013 on WIndows 2012 R2). We have multiple sites and the MDT deployment share is setup
in DFRS share so every site is getting the same deployment information and replication is done automatically. This has been working firn for 3 years with the old system and also with the new environment it was working fine in our own subnet. But when after
i have setup the remote MDT and WDS servers it is not working in these remote sites. The images are loading fine but for some reason the win PE is not connecting to the shares on the windows 2012 server in our site. When i manuualy connect from a remote win
PE to our server i always get the error: system error 58 has occured. The specified server cannot perform the requested operation.
I have been doing some troubleshooting and it seems i only got this issue when i connect from win PE 5.0 to a windows 2012 R2 server in a remote subnet.
When i use win PE 5.0 and connect to a windows 2012 R2 share in the same subnet it connects fine.
When i use win PE 5.0 and connect to a windows 2008 R2 share in a remote subnet it connects fine
When i use an older win PE and i connect to a windows 2012 R2 share in a remote subnet it connects fine
When i use win PE 5.0 and connect to a windows 2012 R2 share in a remote subnet it does NOT connect and gives the above error
The problem is that this problem also does not occure in Windows 7, after the machine was build by MDT and get into the OS i can connect without a problem to the windows 2012 R2 shares.
Checking the event viewer on the 2012 R2 server that is hosting the shares i see that the following events are created:
4624: An account was successfully logged on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Impersonation Level: Impersonation
New Logon:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon GUID:
{8e360e91-001b-c726-84a6-e7281a4bcac8}
Process Information:
Process ID:
0x0
Process Name:
Network Information:
Workstation Name:
Source Network Address:
x.x.x.x
Source Port:
60077
Detailed Authentication Information:
Logon Process:
Kerberos
Authentication Package:
Kerberos
Transited Services:
Package Name (NTLM only):
Key Length:
0
This event is generated when a logon session is created. It is generated on the computer that was accessed.
The subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The logon type field indicates the kind of logon that occurred. The most common types are 2 (interactive) and 3 (network).
The New Logon fields indicate the account for whom the new logon was created, i.e. the account that was logged on.
The network fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The impersonation level field indicates the extent to which a process in the logon session can impersonate.
The authentication information fields provide detailed information about this specific logon request.
- Logon GUID is a unique identifier that can be used to correlate this event with a KDC event.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
5140:
A network share object was accessed.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Network Information:
Object Type:
File
Source Address:
x.x.x.x
Source Port:
60077
Share Information:
Share Name:
\\*\Captures
Share Path:
\??\D:\Captures
Access Request Information:
Access Mask:
0x1
Accesses:
ReadData (or ListDirectory)
4634:
An account was logged off.
Subject:
Security ID:
domain\username
Account Name:
username
Account Domain: domain
Logon ID:
0x1F1FC0
Logon Type: 3
This event is generated when a logon session is destroyed. It may be positively correlated with a logon event using the Logon ID value. Logon IDs are only unique between reboots on the same computer.
Anyone an idea why this is happening?

Hi,
We can refer to the following blog for MDT troubleshooting:
http://blogs.technet.com/b/askcore/archive/2012/05/08/mdt-2010-amp-2012-my-deployment-failed-what-and-where-are-logs-i-should-review.aspx
Best Regards,
Vincent Wu
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

"The specified server cannot perform the requested operation" when rpc from server 2003 to Windows 7

I am having problems where all my Windows 2003 servers cannot rpc to 2 of my Windows 7 workstations, error message is "The specified server cannot perform the requested operation".
All the machines are in workgroup environment.
Windows 7 workstations: desk1, desk2, desk3, desk4, desk5, desk6
Windows 2003 servers: server1, server2, server3, server4, server5
Windows 2008 server: server6
From any Windows 7 workstation I can rpc to any other machines,
\\desk1\d$, no problem
From any Windows 2003 server I can rpc to all the machines exception desk4 and desk5, they give the "The specified server cannot perform the requested operation". However, desk4 and desk5 can rpc to any other machines (including the Windows 2003
servers), no problem
From Windows 2008 rpc to desk4 and desk5 also no problem.
I also have no problem rpc between any of the Windows 2003 servers,
\\server2\d$ from server3, no problem.
I turned off the firewall at desk5 and desk4, just to try, but didn't help, same problem. This show firewall is not the cause of the problem.
Desk4 and Desk5 used to run Windows 2012 for 1 year and recently I downgraded them Windows 7 Professional x64. When they were running as Windows 2012, those Windows 2003 servers have no problem rpc to desk5 and desk4.
The issue is thus lying between desk4 and desk5 with Windows 2003 only\
Any suggestions?
Valuable skills are not learned, learned skills aren't valuable.

Hi,
I found a related thread and a hotfix for similar issue:
Problems Accessing Administrative Shares Remotely - Windows cannot access \\Servername\ShareName
http://social.technet.microsoft.com/Forums/windowsserver/en-US/9807a799-bea3-46ad-92a5-732779135f98/problems-accessing-administrative-shares-remotely-windows-cannot-access-servernamesharename?forum=winserver8gen
You cannot access an administrative share on a computer after you set the SrvsvcDefaultShareInfo registry entry to configure the default share permissions for a network share
https://support.microsoft.com/kb/971277/en-us
Also please check if it is caused by security program such as antivirus program.
If you have any feedback on our support, please send to [email protected]

Trouble exporting: "the requested export operation cannot be performed"

I've been exporting different sequences (from the same project) using the same same settings all week but now suddenly when I try to export a sequence I keep getting the message: "the requested export operation cannot be performed". I have not changed any settings that I can think of and am really puzzled as to why FCP won't let me export. Also I keep getting a lot of "general error" messages while klicking in the timeline of the sequence. At first I thought it had something to do with too little hard disk space, but surely 380 GB should be plenty? Could it have to do with too little memory (running imac 3.06 GHz, 2GB memory)? Seems strange if it's a memory issue as I've been able to export all my other sequences using the same settings.
I'm exporting HDV 1080i footage to HD h264.
Any advice much appreciated!

First, do you have any cmyk graphics?
Second, in my workflow, I almost always export from fcp with sequence settings and then do the compression in compressor. You might try that.
2gigs is not alot of memeory. You might try copying JUST your sequence to a new project and trying to export with just the new project open. Also, do you have plenty of hard disk space available on your startup drive. This is crucial as OSX swaps out memory to your startup drive when it runs out of ram.

An error was encountered performing the requested operation:

I frequently get this error while I initially open a connection and click on a table:
An error was encountered performing the requested operation:
Stream has already been closed
Vendor code 17027
I cannot see the columns information and have to refresh. After this error, if I switch to Data tab from the default Columns tab, I usually get another error that says:
Connection is currently busy. Try again?
[Try Again] [Abort]
I never had these errors using Toad for Oracle tool.
My environment:
Windows 7 64-bit with 16G RAM
Oracle Database 11g R2
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM
Edited by: 恩承四季 on Jan 28, 2013 1:27 AM

Hi,
Vendor code 17027Searching the forum for that issue only yields hits for prior SQL Developer releases. Be aware that the release shipped with DB 11g is rather out-of-date so, if you haven't already downloaded and installed the latest release (3.2.20.09.87), I would recommend upgrading. Easiest is to select the 32-bit version with JDK included.
Regards,
Gary

Deduplication: There is insufficient disk space to perform the requested operation

Hello,
on my Win2012R2 Fileserver is a 550GB disk with userdrives.
I startet Data Deplication but after 100 Optimized Files the job stopped and I cannot start it again.
If I check the Event Log I find:
Data Deplication could not initialize change log under \\?\Volume{ID}}.... The error code was 0x8056530a, There is unsufficient disk space to perform the requested operation. (Event ID 4119)
Then I tried to unoptimize the files with Start-DedupJob -type Unoptimization -volume "E:" but I got another error:
HRESULT 0x8056533a, This kon will not run at the scheduled time because it requires more memory than is currently available.
On the 550GB disk I have about 140GB free diskspace.
The server have 8GB RAM and use 2,3GB at the moment.
CPU is at 0-2%
SYSTEM have full access on the drive, there is no SWAP or boot file on it.
Any more ideas?
I already tried a reboot... ;)
Thanks.
bye Manuel

Hi Sophia,
KB3000850 is installed, the server restarted. But I'm sorry to say, same situation:
PS C:\Windows\system32> Enable-DedupVolume "E:"
Enabled            UsageType          SavedSpace           SavingsRate
Volume
True               Default            26.95 MB             0 %
E:
PS C:\Windows\system32> Start-DedupJob -type Optimization -volume "E:" -wait
Type               ScheduleType       StartTime              Progress   State
Volume
Optimization       Manual
0 %        Failed                 E:
Eventlog:
ID 4119
Data Deduplication could not initialize change log under \\?\Volume{7a4277ad-72ee-11e4-80bf-0050569d1d6b}\System Volume Information\Dedup\Logs. The error code was 0x8056530a, There is insufficient disk space to perform the requested operation.
ID 4106
Data Deduplication warning: Available memory (4095 MB) is less than minimum required (4392 MB)
Error: 0x00000000, The operation completed successfully.
Volume E: is 549 GB and have 186 GB free
Memory is 2,6/8,0 GB at the moment
Best regards,
Manuel

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Windows Resource Protection could not perform the requested operation.

A close friend's clear the drive clone the drive using gparted
run chkdsk
fix the master boot run chkdsk again
Now all is well
Upon booting I noticed managed to install at a time, even I ran sfc /scannow backed up the existing CBS log
ran sfc /scannow again
watched the log It started out strong
PS C:\Windows\Logs\CBS> 2014-03-06 18:48:33, Info 002.18005_none_676975d87c 2014-03-06 18:48:33, Info @0xffa949a8 @0xffa930c9 2014-03-06 18:48:33, Info @0x7feff3c3feb 2014-03-06 18:48:33, Info @0xffa94207 @0xffa93125 2014-03-06 18:48:33, Info 2014-03-06 18:48:33, Info sition = @0xb8fad0
2014-03-06 18:48:33, Info 2014-03-06 18:48:33, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:39, Info POQ 0 starts:
POQ 0 ends.
2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:40, Info POQ 1 starts:
POQ 1 ends.
2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:41, Info POQ 2 starts:
POQ 2 ends.
2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info POQ 3 starts:..... and so on
Until it hit a problem
POQ 34 ends.
2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:09, Info POQ 35 starts:
POQ 35 ends.
2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:10, Info POQ 36 starts:
POQ 36 ends.
2014-03-06 18:49:10, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:12, Error ction FileInstaller::CFil [gle=0x80004005]
2014-03-06 18:49:16, Error 2014-03-06 18:49:16, Error 2014-03-06 18:58:33, Info I searched for "[SR]" C:\Windows\system32>findstr 2014-03-06 18:48:38, Info 2014-03-06 18:48:38, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:39, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:40, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:41, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:42, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:44, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:45, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:46, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:47, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:48, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:49, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:50, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:51, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:52, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:53, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:54, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:55, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:56, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:57, Info 2014-03-06 18:48:58, Info 2014-03-06 18:48:58, Info 2014-03-06 18:48:58, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:00, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:01, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:02, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:03, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:04, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:05, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:06, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:07, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:08, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:09, Info 2014-03-06 18:49:10, Info 2014-03-06 18:49:11, Info 2014-03-06 18:49:11, Info C:\Windows\system32>
I've run into sfc Is there no way Is that the right Thanks for your time & guidance. machine was blue screening on boot so he had me take a look at it. The error in the BSOD indicated Windows was having trouble reading from the drive. Although the drive wasn't clicking, based on what I was seeing, it seemed pretty
was on its way out. I ran chkdsk, several times, and it found plenty of bad sectors but wasn't able to really fix anything. Fortunately I was able to
record, boot sector and boot configuration data store
the system was dreadfully out of date: Firefox, Java, Reader, Flash - the works - so I updated all that. I also noticed it was missing something like 50-70 Windows updates so I had to straight that right away. It
15-20 before failing with 80070057. This to me isn't too uncommon so I rebooted thinking it wouldn't choke next time. Much to my chagrin, any subsequent attempts fail with error 80070057. I even tried installing just a few updates
just 1, and the error persists. My assumption is that one or more files are maybe damaged and need to be fixed.
and it gets to about 27%, then fails with "Windows Resource Protection could not perform the requested operation." I did the following:
in powershell via Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6
c9b6e6\cbscore.dll
CSI 00000001@2014/3/6:23:48:33.027 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff3f53ae @0x7feff3c3ed1
@0xffa93578)
CSI 00000002@2014/3/6:23:48:33.045 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff4386cf @0x7feff4125d9
@0xffa949a8 @0xffa930c9)
CSI 00000003@2014/3/6:23:48:33.048 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff21838d @0x7feff2184ba
@0xffa93578)
CBS NonStart: Checking to ensure startup processing was not required.
CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDispo
CBS NonStart: Success, startup processing not required as expected.
CSI 00000005 CSI Store 4751600 (0x00000000004880f0) initialized
CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000007 [SR] Beginning Verify and Repair transaction
CSI 00000008 Repair results created:
CSI 00000009 [SR] Verify complete
CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000b [SR] Beginning Verify and Repair transaction
CSI 0000000c Repair results created:
CSI 0000000d [SR] Verify complete
CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000f [SR] Beginning Verify and Repair transaction
CSI 00000010 Repair results created:
CSI 00000011 [SR] Verify complete
CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000013 [SR] Beginning Verify and Repair transaction
CSI 00000014 Repair results created:
CSI 00000091 [SR] Verify complete
CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000093 [SR] Beginning Verify and Repair transaction
CSI 00000094 Repair results created:
CSI 00000095 [SR] Verify complete
CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000097 [SR] Beginning Verify and Repair transaction
CSI 00000098 Repair results created:
CSI 00000099 [SR] Verify complete
CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000009b [SR] Beginning Verify and Repair transaction
CSI 0000009c@2014/3/6:23:49:12.802 (F) d:\longhorn\base\wcp\primitiveinstallers\filehierarchy.cpp(1939): Error STATUS_INVALID_PARAMETER originated in fun
eInstallerHierarchy::PortFileInformationBetweenCdfs expression: TmpBlob.Length == sizeof(LUACDF_FILE_ENTRY)
CSI 0000009d (F) STATUS_INVALID_PARAMETER #2119209# from CFileInstaller::CommitChanges(...)[gle=0xd000000d]
CSI 0000009e (F) STATUS_INVALID_PARAMETER #2119208# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd000000d]
CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
but I didn't see anything of great interest
/c:"[SR]" %windir%\logs\cbs\cbs.log
CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000007 [SR] Beginning Verify and Repair transaction
CSI 00000009 [SR] Verify complete
CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000b [SR] Beginning Verify and Repair transaction
CSI 0000000d [SR] Verify complete
CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000000f [SR] Beginning Verify and Repair transaction
CSI 00000011 [SR] Verify complete
CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000013 [SR] Beginning Verify and Repair transaction
CSI 00000015 [SR] Verify complete
CSI 00000016 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000017 [SR] Beginning Verify and Repair transaction
CSI 00000019 [SR] Verify complete
CSI 0000001a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000001b [SR] Beginning Verify and Repair transaction
CSI 0000001d [SR] Verify complete
CSI 0000001e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000001f [SR] Beginning Verify and Repair transaction
CSI 00000021 [SR] Verify complete
CSI 00000022 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000023 [SR] Beginning Verify and Repair transaction
CSI 00000025 [SR] Verify complete
CSI 00000026 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000027 [SR] Beginning Verify and Repair transaction
CSI 00000029 [SR] Verify complete
CSI 0000002a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000002b [SR] Beginning Verify and Repair transaction
CSI 0000002d [SR] Verify complete
CSI 0000002e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000002f [SR] Beginning Verify and Repair transaction
CSI 00000031 [SR] Verify complete
CSI 00000032 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000033 [SR] Beginning Verify and Repair transaction
CSI 00000035 [SR] Verify complete
CSI 00000036 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000037 [SR] Beginning Verify and Repair transaction
CSI 00000039 [SR] Verify complete
CSI 0000003a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000003b [SR] Beginning Verify and Repair transaction
CSI 0000003d [SR] Verify complete
CSI 0000003e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000003f [SR] Beginning Verify and Repair transaction
CSI 00000041 [SR] Verify complete
CSI 00000042 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000043 [SR] Beginning Verify and Repair transaction
CSI 00000045 [SR] Verify complete
CSI 00000046 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000047 [SR] Beginning Verify and Repair transaction
CSI 00000049 [SR] Verify complete
CSI 0000004a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000004b [SR] Beginning Verify and Repair transaction
CSI 0000004d [SR] Verify complete
CSI 0000004e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000004f [SR] Beginning Verify and Repair transaction
CSI 00000051 [SR] Verify complete
CSI 00000052 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000053 [SR] Beginning Verify and Repair transaction
CSI 00000055 [SR] Verify complete
CSI 00000056 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000057 [SR] Beginning Verify and Repair transaction
CSI 00000059 [SR] Verify complete
CSI 0000005a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000005b [SR] Beginning Verify and Repair transaction
CSI 0000005d [SR] Verify complete
CSI 0000005e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000005f [SR] Beginning Verify and Repair transaction
CSI 00000061 [SR] Verify complete
CSI 00000062 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000063 [SR] Beginning Verify and Repair transaction
CSI 00000065 [SR] Verify complete
CSI 00000066 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000067 [SR] Beginning Verify and Repair transaction
CSI 00000069 [SR] Verify complete
CSI 0000006a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000006b [SR] Beginning Verify and Repair transaction
CSI 0000006d [SR] Verify complete
CSI 0000006e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000006f [SR] Beginning Verify and Repair transaction
CSI 00000071 [SR] Verify complete
CSI 00000072 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000073 [SR] Beginning Verify and Repair transaction
CSI 00000075 [SR] Verify complete
CSI 00000076 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000077 [SR] Beginning Verify and Repair transaction
CSI 00000079 [SR] Verify complete
CSI 0000007a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000007b [SR] Beginning Verify and Repair transaction
CSI 0000007d [SR] Verify complete
CSI 0000007e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000007f [SR] Beginning Verify and Repair transaction
CSI 00000081 [SR] Verify complete
CSI 00000082 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000083 [SR] Beginning Verify and Repair transaction
CSI 00000085 [SR] Verify complete
CSI 00000086 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000087 [SR] Beginning Verify and Repair transaction
CSI 00000089 [SR] Verify complete
CSI 0000008a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000008b [SR] Beginning Verify and Repair transaction
CSI 0000008d [SR] Verify complete
CSI 0000008e [SR] Verifying 100 (0x0000000000000064) components
CSI 0000008f [SR] Beginning Verify and Repair transaction
CSI 00000091 [SR] Verify complete
CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000093 [SR] Beginning Verify and Repair transaction
CSI 00000095 [SR] Verify complete
CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
CSI 00000097 [SR] Beginning Verify and Repair transaction
CSI 00000099 [SR] Verify complete
CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
CSI 0000009b [SR] Beginning Verify and Repair transaction
issues in the past, and in one instance, booting the OS install DVD, and running sfc /scannow /offbootdir=c:\ /offwindir=c:\windows did fix the issue. But I have to ask
to do that while in Windows? Can't I mount some WIM and do it that way instead of booting the DVD?
course of action, or is/are there some other options I should explore?

Hi,
In my opinion, if you want SFC to use a sourcepath to repair your system, you can just use in-place upgrade to do this:
How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
http://support.microsoft.com/kb/2255099
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support
Thanks for taking the time to reply and for this suggestion.
The in-place upgrade is a wonderful potential solution, but the process requires the source media. Most systems these days don't include the OS or recovery CD's because the manufacturers want you to pay for them. And most consumers aren't spending
the $50-$70 dollars to get the media, which complicates things in situations like this. So while they've purchased a machine and have a valid Microsoft COA sticker on the box, they can't do anything.
Also, to make matters worse, I posted this in the wrong forum as this is a Vista Home Premium PC. [My sincere apologies for that. Mods please feel free to move/reclassify] I do have a Vista Home Premium DVD, but its the 32-bit version, not 64-bit,
which is what this system is. So unless I can locate a Visa Home Premium 64-bit DVD, or they upgrade to Windows 7 or 8 (which they probably should do anyway), we're sunk.

An error was encountered performing the requested operation: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor    Vendor code 12505

From sql developer I am trying to connect to database in my local machine. It shows the following below error. Any suggestions?
An error was encountered performing the requested operation:
Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
Vendor code 12505

lsnrctl results are as shown below
C:\Users\ndodd_000>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:40
:25
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                18-AUG-2013 15:29:41
Uptime                    0 days 2 hr. 10 min. 50 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\app\ndodd_000\product\11.2.0\dbhome_1\network\admin
\listener.ora
Listener Log File         c:\app\ndodd_000\diag\tnslsnr\Vamsi\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service results
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 18-AUG-2013 17:
:20
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
Service "sysdba" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:186 refused:0 state:ready
         LOCAL SERVER
Service "sysdbaXDB" has 1 instance(s).
Instance "sysdba", status READY, has 1 handler(s) for this service...
    Handler(s):
      "D000" established:0 refused:0 current:0 max:1022 state:ready
         DISPATCHER <machine: VAMSI, pid: 904>
         (ADDRESS=(PROTOCOL=tcp)(HOST=Vamsi)(PORT=49237))
The command completed successfully

Unable to receive e-mails & Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.

Everything good until yesterday, Sending and Receiving' reported error (0x80040126) & (0x8004102A) : The operation cannot be performed because the connection to the server is offline.
I am connected so I don't know why it is "offline". I am able to "send emails" but not receiving.

Hi,
What’s your Outlook account? Exchange account or some other Internet email accounts?
This issue is usually happened when the Microsoft Outlook Hotmail Connector account is syncing changes to a folder and cannot find the folder in the Outlook client. Please try the following KB to check it:
http://support.microsoft.com/kb/2231628
If the issue persists, please create a new Outlook profile and add the email account to have a try:
http://support.microsoft.com/kb/829918
Regards,
Winnie Liang
TechNet Community Support

Ui5 - eclipse "the requested operation cannot be performed "

Similar Messages

Maybe you are looking for