Unable to extract data when running a query

i have create the InfoObject , InfoCube and the DataSource . the DTP shows that everything is running fine but when i design a query and execute it, it show "No Applicable Data Found.". so what are the possible reason for this to happen?

Hi ,
there can be two possible error which causing to not showing data in queries,i will explian both of then below-
(1) go for the characteristic info object for which you are making query,and check that objects bex properties,it may -data or text.
use same property in query for that characteristic .the way to do this is -open query in change mode,go for that characteristic ,right click and go to properties and there change the properties respectively.
(2) may data is not loaded correctly for that Info Provider on which u made your query.
check the data mart status (right sign on the left hand side in request tab of that info provider, to reach there right click info provider and go to manage. )
about ur problem of not loading data again on info provider,if u already loaded the data ,delete the erroneous req by making it red first and then delete it.
IF there is no already data in info provider then go to psa and check the erronreous record in respect of correct records(i hope u r using PSA during loading data to info provider ), ther u find the clue of failure ,in most of the cases it becoz of presence of special characters,
hope it helps.

Similar Messages

Getting SQL*Net more data from client waits when running a query through web based interface

Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.

Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data.

Web Intelligence Report unable to retrieve data on "Run Query" option

When I add a new dimension or measure to a report using "Edit query" and there after i run the query, it takes 10 to 12 mints to process the data and there after shows the message "no data retrieved" but as I click on refresh data button , I am able to see the data.

Hi,
May be the new combination may not result any data or if you are using .net panel where we can't edit the data provider. If you are using java interactive panel then you can edit the query and get the result.
cheers,
Suresh Aluri.
Edited by: Suresh Babu Aluri on Sep 8, 2009 8:49 PM

Query not refreshing all data when run in workbook with other queries

All,
I have the following problem. I have a workbook that has two queries, one on each tab.
The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
And both queries run fine when executed alone.
Again, Both queries use the same company code variable.
Any help will be rewarded with points and is appreciated.

Tasha,
Remove the queries from the workbook and reinsert them. This should show the desired result.

When running a query of a 0IC_C03 cube copy inventory shows as blank

When loading the 0IC_C03 cube copy ZMM_C01 Cube: Material Stocks/Movements, if there
is no movements for that day in a plant the inventory values do not show when we run a query on that key date
When we create a movement type and run the extraction then the ending inventory values
will show when we run a query usig that key date.
So if there are no movements types for a plant then the inventory balance does not show up in our query reports. Once we post a
movement type for a plant and extract data then rerun our reports then the inventory balances show up.

Refer link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30f15839-0cf1-2b10-c6a7-ebe68cc87cdc?QuickLink=index&overridelayout=true
& check ur e-mail.

'Structure Changed' Error when running a query

Hi,
I created a query with 2 structures. One structure for the time periods and one with Key figures (Calc and Restricted).
The query ran fine and subsequently I put this into a workbook which had other queries and made a workbook type report.
I modified the structure with the key figures recently and when I run the query now a popup box appears saying "warning; structure changed" and lists down the query elements that I changed, and subsequently the query does not run (no data is displayed).
But if I open the same query in design mode and do nothing and run the query again (with the same input parameters), it runs ok.
Please advise on how I can sort this out.
Any help would be greatly appreciated.
Thanks,
Dominic

Hi,
If you want, you can remove the query with 'Remove Query' option in the BEx toolbar and then re-insert the query and then save the changes to the workbook. The next time, you refresh the workbook you won't get any such messages.
Thanks

Choosing a Context when running a Query

Hello,
I have 4 Facts Tables my Universe A, B, C & D, thus have 4 context paths
A, B, C and fact tables and share common dimensions within them. D is a view which I created which takes the value from the A & B Fact tables .
I ran a query which takes all values from D and it works fine, however when I run a query taking all values from either A or B, it asks me to choose the context. The best part is that the context which query is based out of is not selected.
Question) How do I ensure that I do not get this message every time, as the intent is that all the data for all the filters will be dumped into Excel via QAAWS for the Xcelsius dashboard.
Please advice.

I have a star schema, ie 5 FACT tables and 7 dimension tables, All fact tables share the same dimension tables, some FACT tables share 3 dimesnsions, while other share 5 dimensions.
I did adopt the best practices, and as recommended in the book, I tried to resolve them using Context, as it is the recommended option to Alias in a star schema setting. The contexts are resolved, but I still have loops. I also cleared the Multiple SQL Statement for each context option, but no luck. I need to get this resoved ASAP,
I checked all the context and they look fine, however when I again go to detect context it asks me to add the context which is already present. It give me an option to overwrite? Besides, I also get some Alias options. However I was told and it was mentioned in the book that Alias is not a good option to resolve loops but context is when you have a STAR SCHEMA.
Please suggest idea.
AP

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

"SYSTEM_FAILURE" error message when running BEX query

Hello,
I often encounter this error when I run BEX queries (take note that I encounter this error after I have already entered the query values). But when I run the same query in a later time, the query becomes successful, which makes the problem intermittent. I only encounter this when running BEX but I don't encounter such error when I'm running the query in RSRT and displaying it in SAP instead of in Excel. I hope you have any idea about this. Thank you.

Hi Lee,
Check transaction ST22 or SM21 after you get that message.
Hope this helps.
regards,
Diego

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Cannot generate data when running TF_TIME_MAPin sample time dimenation ?

I hava done following:
(1)Run the SQL scripts(owb_time_seq.sqlåowb_time.sql )into target schema.
(2) Import the MDL file (owb_bp_time.mdl).
(3) Copy and paste the times dimension into project to be able to use it.
(4)Copy and paste the mapping to mine own project.
(5)Open the mapping, do a right mouse click on the time dimension and select 'Reconcile inbound'. Select matching strategy to match by bound name
(6)succuess deploy the T_TIMEdimenation and TF_TIME_MAP mapping
when run TF_TIME_MAP mapping,there is no data inserting to dimenation table,what can I do? Can anybody tell me how I can resolve the problem?
Thanks!

Hi,
perhaps it's the same UK-Problem like here:
Errors in demo project OWP_BP in OWB 10g

Upload a text file of values when run a query

In SAP BW 3.x BEx Analyzer, we can import a text file with list of values for each variable.
For example, you want to run a report for certain product numbers, but say the prod no list is of 3000 no's long, it'll take the user forever to select and enter them in the report entry variable, so instead you upload a text file, with all this list of 3000 prod no's and run the report.
Does this option still exist anywhere for version 7.0? BI Analyzer is different than Bex Analyzer. Can anyone explain it? Thanks!

Hi Qingbo,
Not using any standard solution (i don't know any in 3.5) you can use an variable of type exit. Inside the variable value calculation, you can use a flat file stored in the application server to read the values of the variable.
Another option is to store those values in a cube (mantained using flat file upload or a BPS layout) and use a replacement path variable using a query over this cube to run the query you need.
Hope this helps.
Regards,
Diego

Unable to extract data from 0HR_PA_PD_2 datasource

Hi,
I am extracting the data from 0HR_PA_PD_2 (Appraisals) datasource to the cube 0PAPD_C02 (Appraisals).Though the data available in R/3 (83 records,checked in RSA3) it is giving the message "No data available in the source system".I checked the RFC connection,IDOCs,SM58 for any message.But everything is fine.In the status tab ,it is showing "Info IDoc received with status 8".But the data is available in R/3.
Please help me if any one faced this type of issue or is there any other steps has to be followed.
Thanks & Regards,
Dinakar.

Hi Dinakar,
Check Roberto's reply in this thread... It might help you...
Re: Problem in InfoPackage for Billing Document Item Data(2LIS_13_VDITM)
Also check these related threads...
Info IDoc received with status 8. - extracting data from R/3 -co-pa
Info IDoc received with status 8. - extracting data from R/3
error while doing init load ..Idoc received with status 8
Info Idoc received with status 8
Regards,
KK.

Query for selecting current date when running report

Hi all
I need a query that will copy today's date on posted sales order via DTW then that query will be linked to an alert and be sent to the sales manager every morning after the import went through successfully.
The report at the moment is running fine as i pulling through the other info required the only problem is it's pulling all the sales orrders on the system , we want it to pull only the days orders imported.

You could use either of these queries
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE T0.DocDate = GETDATE()
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate
OR
SELECT T0.DocNum, T0.DocDueDate, T0.CardCode, T0.CardName, T0.DocTotal, T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK
FROM [dbo\].[ORDR\] T0
WHERE DATEDIFF(Day, T0.DocDate, GETDATE()) = 0
ORDER BY T0.U_ROUTEMARKTN, T0.U_ROUNDS, T0.U_DAYOFWEEK, T0.DocDueDate

Unable to extract data when running a query

Similar Messages

Maybe you are looking for