When I make a call, i can't hear the other person, when I get a call, I can hear them and they can't hear me. What's up?
when i make a call, i can't hear the other person but they can hear me. when i get a call, i can hear the caller, but they can't hear me. what's up?
Hello there, Maribelita.
The following Knowledge Base article has some great steps to work on resolving the exact issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.
Similar Messages
-
Can barely hear the other person when talking on the phone
when using the phone function i can barely hear the other person on the line.. the speker volume is at the max.
remove the thin plastic cover, its not the protective kind its a shipping one. It is covering you ear piece.
-
I can't see the other person when I video chat! and its reallly annoying!!!
I can hear them, and they can see/hear me. It kinda stalker haha. So basically I tried to change the bandwith limit to 500 kbps, and under quicktime preferences changed the streaming to 1.5 mbps. AND THE SAME THING KEEPS HAPPENING. This has been going on for like a month, I called an apple guy and hes a moron. Can anyone fix this?? I used to be able to 3-way vchat and see everyone and no i can't do anythingggggg. PLEASE HELP ME?!?! Thank you so much,
MikeHi,
Welcome to the Discussions
DO you have Perian at version 1.1.3 installed ?
If Backdate it to version 1.1.2
http://www.apple.com/downloads/macosx/video/perian_christopherforsythe.html
(Go to System Preferences an Perian and use the Uninstall option > use the link and install > DeSelect the automatic Update option).
9:30 PM Monday; February 2, 2009 -
Cannot hear the other person when using Skype.
When receiving a video message via Facebook (skype) cannot hear the other person. They hear me but I don't get any sound. Please help. Thank you.
Both of you can take a look at this help Guide from Skype:
Making a video call (Windows desktop)
Kind Regards,
Dragon-Fur -
Can bearly hear the other person when I make a call...
When I make a call from my iPhone the other
end is very faint. I'm sure theres some wicked
simple solution on like the settings or something
but I can't find it! Any suggestions?the other person can hear you fine, but you can't hear them?
the simplest thing is the volume rocker on the side, while you are on a call make sure your volume is adjusted all the way up.. after that make sure you don't have the plastic covering the speaker
after those try a soft reset by holding the home button and the sleep/wake button until you see the apple logo, if that doesn't work try a restore from itunes.. if you are still having the problem after that it is time to call apple 1-800-myiphone -
Can't hear the other person when I am talking
WHen I am using Skype or FaceTime on my iPad, I can only hear the other party speak if I am silent on my end. I have to keep asking them to repeat because I can see their mouth moving but I can't hear them. In other words, the sound only works one way at a time. Is this normal, or is there a settings change that make so that sound works both ways at the same time? Is it a hardware or a software limitation?
I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update
-
When I use facetime with my fiance on my brand new macbook air she can see me but I can't see her. Please help me remedy this problem, I have verified that I am logged into facetime and connected it with both my ipone5 and my email but haven't seen any changes. It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook. Thank you for your help
Frogmanian wrote:
It is a 1 week old macbook air and I'm assuming it has the latest iOS installed but don't know how to check as this is my first Macbook.
MacBook Air does not run iOS. It runs OS X (pronounced as in OS - ten). You can check which version you have by clicking the Apple logo in the upper left of the menu bar, then "About This Mac". The current version is OS X 10.8.4. If you do not have that version, you can click "Software Update" just below the "About This Mac" entry under the Apple logo.
Anyway, typically, the reason for the FaceTime behavior you're describing is a less-than-robust internet WiFi connection. -
TS4268 I can't hear the other person when using FaceTime
I Am able to connect to them but all I hear is a crackling static sound. My iPad is unmuted and the volume is turned up, I am pretty sure it's not my Internet connection because I have never had a laggy connection. Any help would be appreciated.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
The other person could have dust in their Mic hole. Use a vacuum to remove the dust.
Cheers, Tom -
what can i do, when i call someone with mit i-phone, i only hear the other person, when i press the loud-speaker button, does anyone know, how to solve this problem
Does hte iPhone say headphones when you adjust the volume, even when they aren't connected?
If it does, there might be some lint or something in the jack. Take a look at this Apple document -> iPhone: Can't hear through the receiver or speakers -
Lumia 800: cannot hear the other side when receivi...
hello all.
i had recently upgraded to w7.8 for my phone, and problem started coming.
i cant seems to hear the other person when i get or make calls, and they cant hear me too.
i get this problem quite often, and i tried factory reset, and no data is loss( i wonder do i perform the resetting correectly)
i tried off and on my phone again. same thing still happen occasionally.
what is going on? PLeAse help!!!
the phone is only 2 months old and never drop/bump anything.If you can't hear the caller THIS may be helpful ..but if the other end can't hear you then may be you need to visit Nokia Care
BTW, How did you do the Factory reset ? -
When I make a call, I can hear the other person but they can't hear me? Tried everything. Took it to the local ATT store and all they could tell me is it shouldn't be happening and to take it to an apple store? Any ideas?
Try to isolate the issue. Use earphone and if the issue still happens then it might be the phone issue.
- If earphone works fine then it may be the mic on the iPhone. Try cleaning the debris on the iPhone. Finally a restore of the device and try to set it as a new device. Tha will isolate if it is a software or hardware issue.
- You can take the phone to Apple store once you have tried all this. -
When I make a call, I can hear the other person, but they can't hear me. If I put it on speakerphone, we can both hear each other fine. What is wrong?
take a look at the link
Iphone: hardware troubleshooting
http://support.apple.com/kb/TS2802 -
The calls I make go through, but I don't hear it ringing or the other person when they answer. I can't hear anything when I make the phone call. How do I fix this?
I have had similar issues. Have you gotten any resolution?
-
Hi I have an iphone 5. When making or receiving calls I can't hear the other person? Anyone tell me what is going on?
Try taking a look at this support document to see if the steps there help. If you can't hear a person on a call or voicemail or if the sound quality is poor on iPhone - Apple Support
-
When making a call I suddenly can't hear the other person but my iphone 4 says it's still connected
Phone is on orange contract and today during calls I can't hear the other person and the phone thinks we are still connected. Help please!
I've got that problem too sometimes. I think it's a mistake in iOS and it will be fixed in another iOS-update
Maybe you are looking for
-
Values not getting saved in DFF in iSupport
Hi, I have enabled DFF in iSupport, which is visible to users. Users are able to enter values in the fields, but after SR is created, the values are not visible in SR update screen in iSupport nor in SR form in customer support. Does anybody know wha
-
IP Address Changed on my AD - Now Authentication is not Working
I got a new service provider for my home network, and as a result their router provided a new set of IP addresses. My home network is supported by an OD running on Mac OS X Server v 10.4.11. The laptops in the house seem to be OK, but my main machine
-
Mapping default printer based on AD attribute
Hi all ! Sorry for my english, i'll try to be clear... :) I need to run a VBscript on TSE 2008 R2 servers to set computer's default printer (not user). For this, I need to use the ClientName var. The default printer name is written in the computer'
-
Is there a documented formula for converting UTC date/time stamps in CallDetailRecords (e.g., 1074902387) to a recognizable time/date?
-
Parameters passed in smartforms are not taking any value
hi everyone Ive passed parameters in my print program and these parameters are defined in the Forms Interface Section of the smartforms, but when I am executing the program, the smartforms is not taking the value of the parameters, Can anybody help m