Which switch model for more than 4 10G-Ports?
we have a little network (100 clients, 1 VMware-Cluster with 2 Hosts, 1 Storage) and we want to replace old switches.
we want to connect 4 cisco catalyst 2960X to core switch with 10G, and 4 2960X with 1G.
Core switch is main routing instance for all.
So we need following features for the core switch:
- 8 10G-Ports
- Redundancy
- Static Routing
Which is the cheapest model for core?
Thanks!
Martin
I'm not sure if you get it "cheap" ...
You could use:
A stack of 2*WS-C3650-48TQ (each has 4*10GE)
A stack of 2*SG500X-24 (each has 4*10GE)
one or two SG500XG-8F8T (each has 8*10GE copper and 8*10GE SFP+)
2) and 3) are from the SmallBusiness line of switches. So option 2) will probably the cheapest.
Edit: Just looked at the stacking of the 500X. Seems that the 10GE-ports are used for stacking, so you would need four of them to get eicht usable 10GE-Ports. It still could be cheaper then the 3650, but probably not better ...
Similar Messages
-
How to close open POs which are open for more than two month
I am new to MM please somebody help me with this
Thank youthere is NO STD SAP program which will help u closing the open PO (more than two months)
you need to go each and every PO and mark it as Del completed (item level in deleivery tab)
but this is only stastestical indicator. System wont stop you creating further GR against such PO if any Qty leftout.
for example - PO order 10EA, you recd 8EA and marked the indicator , still you can make the GR for 2EA
there is SPRO setting as well to mark the PO as delivery completed once PO Qty and MIGO QTy is equal or with some variance . but this will work on real time
Another way to set the final invoice indicator in invoice tab
system will allow you to post the further invoices but all be blocked.
somebody need to go and verify the blocked invoices and take necessary action
This is again a manual activity, there is no such STD setting or T code exist
Another way is you can create a program with the help of abaper
built a logic on date / QTy and Amount and update the PO for del complete ( EKPO-ELIKZ) and final inv indicator (EKPO-EREKZ) by using BAPI PO change
hope this will help you -
Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?
This is the solution to your issue.
I wish you the best of luck.
http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU -
Lock user ID which are kept idle for more than 30 mints.
Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
BabuDear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain. -
I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html -
I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards. -
I do not have access to itunes store. I tunes store was working well with my old ipod with 30GB wich i had for about 6 years. I went to the store to have the battery replaced. However, I was told that my ipod was ready to be recycle. I received 10% discount to buy an ipod touch with 60GB +. When I connected the ipod touch to my computer, i did not have access to itunes store. Also, none of my music was synced. In addition, the icon for my ipod showed that the battery was not charged even though I charged the ipod touch for more than 8 hours prior to conneting it to the computer.
I have installed the latest version for itunes 10.6.1. Still I do not have access to itunes store. I have put more than 10 hours trying to solve this issue. I have become frustrated and ready to return my purchase.
Please helpHere is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
Using i3 - keys start to lag (have to hold key for more than 1 second)
I'm using i3 and am having trouble with the keys suddenly and I have to restart the session to get it back to normal. No clue what it could be. I can use gnome, cinnamon, wmii, and awesome without issue, but i3 is what causes me problems.
When I type, I have to hold each key for more than 1 second before it registers. So in order to type "boat" I have to press and hold b for a second, then o for a second or so, same with a and t. Any idea what I should check first?
Thanks.
EDIT:
It just seems to happen randomly. When I'm typing, on the web, playing a game, etc. It's not like it's happening whenever I do a specific task or am running a specific application.
Last edited by sdouble (2013-04-07 19:30:25)UnsolvedCypher wrote:What's your desktop environment?
Boots into GDM, select my session (i3), and log in that way. only WM I'm having trouble with this way is i3.
kaszak696 wrote:Can you see how xev (xorg-xev package) reacts to keypresses? Also, posting relevant configs and logs would be helpful.
I think i had a similar issue years ago, but i can't remember the details, sorry.
I haven't checked. I'll check next time it happens. It happens about once per day. I'll report back next time.
Here is my i3 config file. It's pretty raw, I've really only added a couple things to it (gimp & multimedia keys from keyboard, though I just noticed today that my vol up and down wheel isn't working anymore)
# This file has been auto-generated by i3-config-wizard(1).
# It will not be overwritten, so edit it as you like.
# Should you change your keyboard layout somewhen, delete
# this file and re-run i3-config-wizard(1).
# i3 config file (v4)
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
set $mod Mod4
# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below. ISO 10646 = Unicode
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, if you need a lot of unicode glyphs or
# right-to-left text rendering, you should instead use pango for rendering and
# chose a FreeType font, such as:
# font pango:DejaVu Sans Mono 10
# Use Mouse+$mod to drag floating windows to their wanted position
floating_modifier $mod
# start a terminal
bindsym $mod+Return exec i3-sensible-terminal
bindsym Control+$mod exec i3-sensible-termi
# kill focused window
bindsym $mod+Shift+c kill
# start dmenu (a program launcher)
bindsym $mod+p exec dmenu_run
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym $mod+d exec --no-startup-id i3-dmenu-desktop
# app launcher
bindsym $mod+Control+g exec gimp
# multimedia keys
bindsym XF86AudioMute exec amixer set Master toggle
bindsym XF86AudioRaiseVolume exec amixer set Master 2%+
bindsym XF86AudioLowerVolume exec amixer set Master 2%-
# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right
# resizing alternative
bindsym $mod+Control+Left resize shrink width 5 px or 5 ppt
bindsym $mod+Control+Down resize grow height 5 px or 5 ppt
bindsym $mod+Control+Up resize shrink height 5 px or 5 ppt
bindsym $mod+Control+Right resize grow width 5 px or 5 ppt
# alternatively, you can use the cursor keys:
bindsym $mod+Left focus left
bindsym $mod+Down focus down
bindsym $mod+Up focus up
bindsym $mod+Right focus right
# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right
# alternatively, you can use the cursor keys:
bindsym $mod+Shift+Left move left
bindsym $mod+Shift+Down move down
bindsym $mod+Shift+Up move up
bindsym $mod+Shift+Right move right
# split in horizontal orientation
bindsym $mod+h split h
# split in vertical orientation
bindsym $mod+v split v
# enter fullscreen mode for the focused container
bindsym $mod+f fullscreen
# change container layout (stacked, tabbed, toggle split)
bindsym $mod+s layout stacking
bindsym $mod+w layout tabbed
bindsym $mod+e layout toggle split
# toggle tiling / floating
bindsym $mod+Shift+space floating toggle
# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle
# focus the parent container
bindsym $mod+a focus parent
# focus the child container
#bindsym $mod+d focus child
# switch to workspace
bindsym $mod+1 workspace 1
bindsym $mod+2 workspace 2
bindsym $mod+3 workspace 3
bindsym $mod+4 workspace 4
bindsym $mod+5 workspace 5
bindsym $mod+6 workspace 6
bindsym $mod+7 workspace 7
bindsym $mod+8 workspace 8
bindsym $mod+9 workspace 9
bindsym $mod+0 workspace 10
# move focused container to workspace
bindsym $mod+Shift+1 move container to workspace 1
bindsym $mod+Shift+2 move container to workspace 2
bindsym $mod+Shift+3 move container to workspace 3
bindsym $mod+Shift+4 move container to workspace 4
bindsym $mod+Shift+5 move container to workspace 5
bindsym $mod+Shift+6 move container to workspace 6
bindsym $mod+Shift+7 move container to workspace 7
bindsym $mod+Shift+8 move container to workspace 8
bindsym $mod+Shift+9 move container to workspace 9
bindsym $mod+Shift+0 move container to workspace 10
# reload the configuration file
bindsym $mod+Shift+q reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
# resize window (you can also use the mouse for that)
mode "resize" {
# These bindings trigger as soon as you enter the resize mode
# Pressing left will shrink the window’s width.
# Pressing right will grow the window’s width.
# Pressing up will shrink the window’s height.
# Pressing down will grow the window’s height.
bindsym j resize shrink width 10 px or 10 ppt
bindsym k resize grow height 10 px or 10 ppt
bindsym l resize shrink height 10 px or 10 ppt
bindsym semicolon resize grow width 10 px or 10 ppt
# same bindings, but for the arrow keys
bindsym Left resize shrink width 5 px or 5 ppt
bindsym Down resize grow height 5 px or 5 ppt
bindsym Up resize shrink height 5 px or 5 ppt
bindsym Right resize grow width 5 px or 5 ppt
# back to normal: Enter or Escape
bindsym Return mode "default"
bindsym Escape mode "default"
bindsym $mod+r mode "resize"
# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
status_command i3status -
MMBE for more than one Material
Hi
I
need a report than allows us to view stock holding in alternative units of measure. MMBE is exactly what I need but it only allows us to view one material at a time. I need to be able to view many materials
at one time and switch to the alternative unit. For example view material in stock by each's then convert to ton's
Thanks for the helpHi,
You can check material stock for more than one material by using transaction
MB5B - By selecting date range for which stock need to be viewed.
MB52 - For warehouse managed material
Hope this will resolve your issue.
Reagrds,
Avinash. -
WSP deployment showng as deploying for more than 30 minutes.
WSP deployment showng as deploying for more than 30 minutes.
Hi,
I have an wsp , where i tested deploying in my test environment, But when i try deploying same wsp deployment in Production. Its showing as
deploying for more than 30 mins.
BadriThis is most likely due to the timer service being turned off or failing for a machine. When deploying a WSP, it will schedule a job on ALL servers in the farm with the web application service turned on. It will stay on deploying if one of the servers is
in bad health.
1. Use CA to see on which server it is failing.
2. Cancel the deployment like described here:
http://ybbest.wordpress.com/2011/09/10/how-to-fix-%E2%80%9Ca-deployment-or-retraction-is-already-under-way-for-the-solution-%E2%80%9C-wsp%E2%80%9D-and-only-one-deployment-or-retraction-at-a-time-is-supported%E2%80%9D/
3. fix the server and/or timer service somehow.
4. you can deploy with PowerShell and the -Local switch like described here:
http://technet.microsoft.com/en-us/library/ff607534.aspx do it on all servers, that way you will either succeed it or see the problem.
Hope that helps!
Independant SharePoint Consultant. Feel free to contact me. Blog:
http://www.sharepoint.bg/radi Twitter:
@RadiAtanassov -
Cannot get Macbook Pro to internet for more than 5-8 minutes. Why?
Greetings Apple board, this will be my first.
I have recently bought a Macbook Pro and I love everything about it. The only problem I'm having with this laptop is connecting it to the internet for more than 5-8 minutes. I have two PC's in the house which are connected to the internet via wireless Linksys router. I'm not to tech-advanced so if somebody could explain step-by-step as to what to do, that'd be great and very much appreciated.
A note: My Macbook works at other people's houses.Model #, have you updated the firmware? Are you using a security protocol? If so which? The other thing I would try is:
System Preferences>Network>Advanced>DNS. Put the following in the DNS Servers box:
208.67.222.222
208.67.220.220
hit OK. Then hit Apply
The more pertinent info you provide as to your set up and what you have tried, the easy it is to help trouble shoot without going up and back. -
my macbook pro won't hold a charge for more than a day...do I need a new battery? I have a 13" early 2011 model.
A: did you leave most of the time or always plugged in?
B: did you often drain the battery very low?
If so, then thats the issue
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace -
Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time
Hello all,
Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
(ME61/ME62/ME63)
Detailed replies with various possibilities would be highly appreciated.
Thanks & Regards,
Joy GhoshThe vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
There you define a job that runs RM06LBAT report.
You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create. -
Dear experts,
We have two requirements regarding to the "Anual leave" quota.
1. Quota reduction when employee is inactive for more than 180 days
2. Advance quota days when employeee does not have enough balance
We have in place an "Anual Leave" quota related to a calendar year period, that gets generated dialy in time evaluation. This quota gets the employee entitlement from a set of rules that stored the corresponding balance in a period time type, that is the one that we defined in the customizing. This is working fine. The problems start when we try to incorporate the other two requirements.
Regarding the first requirement, if the employee has been inactive for more than 180 days in a calendar year due to unpaid leave, we need to start quota reduction as follow,
First, we need to clear the balance that was calculated above in the schema.
Then, we need to calculate one leave day for every 20 days worked till the end of the year, considering as such, everyday the employee is expected to work, except days on which the employee has been absent on unpaid leave.
For the second requirement we created a manual quota call "Advance Anual Leave". So, if the employee, wishes to take 20 working days holiday, but in his/her Anual Leave quota has only 10 days available, we have to create an "Advance Anual Leave" quota manualy for 10 days. When the quota for next year gets generated, we need to deduct these advanced 10 days from it. This deduction should stop the year after.
The problem we are finding with these two requirements is that, due to the Anual Leave quota gets generated dialy, we can't get the balance right.
Thanks in advance!
Kind regards,
AlexHello binbingogoABC,
Shopping on BestBuy.com should be easy and fun and not fraught with the kind of trouble that you describe. I regret very much that this has been your experience.
Using the information you provided when you signed up for Best Buy Unboxed I was able to locate your cancelled orders. I have requested more information from my back-office partners. As soon as I have additional details about your situation, I will reply again to this message. In the interim, I'm sorry that I must impose upon your patience.
I'm very grateful that you wrote to us with your concerns.
Sincerely, -
It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!
Hi Vmanfromusa!
It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Thanks for using the Apple Support Communities. Have a good one!
-Braden
Maybe you are looking for
-
hi All.. i want to use my iphone 4 to play poker on facebook with the zynga.. idont know the apps name,, thank's for ur help, and how to upgrade ios 4.3.3, now i'm still using ios 4.1.1, thank's
-
Hi, I'm not able to install itunes in my Win 7 , 64 bit. getting the below mentioned error.. any help would be greatly appriecated. " Could not open key: UNKNOWN\Components\DA42BC89BF25F5BD0AF19C3B9B1A1EE8\C0B7E33AC99B9CE47B20A823B86 1A19F. Verify th
-
Problem with Generic Sync after upgrade
Hi guru, I have this problem: I have done a upgrade ME2.1 -> MI2.5 SP18. I have a simple Generic sync application that using a simple Function Module: <b> function Z_ME_TEST_CONNECTION. ""Interfaccia locale: *" EXPORTING *" VALUE(STATUS) LIKE B
-
Itunes won't display my episode descriptions
Hey, I'm hoping someone can help me out. I'm pretty new at this. I just submitted my first podcast to itunes and the listing won't display me episode descriptions. Would someone be so kind as to check my RSS file? The URL of the RSS file is www.indig
-
Compilation problem -- classes in same package
I feel like I should know the answer to this, but since I can't figure it out, I'll ask it anyway. I have the following three classes, all in the same package. The Dog class compiles just fine. As for the other two, the compiler insists it "cannot fi