WRT54G+Remote Assistance

Hi folks,
I need some help.
I have my laptop with Win XP SP2, one cable modem, and one WRT54G.
All work, the problem is that i can't use the remote assistance with Windows Live Messenger, when the friends ask me to help them the remote try to connect, but it dont work.
Before install the Linksys all was working.
Anyone know what can be the problem?
Thanks alot.

Thanks for the trick, i have forward the port 3389 and the 1024, but still nothing.
If i use the laptop connect with the cable modem and without the WRT54G the remote work.
Maybe the port is wrong?

Similar Messages

  • WRT54G and Remote assistance

    I have a WRT54G ver 6 and firmware 1.01.0 with port 3389 opened for my IP address, enabled and with no other firewalls. I can not initiate nor accept a Remote Assistance request from another city with either of my laptops. Any ideas?
    It seems to me that getting this device to work properly should not be so difficult.

    Do you think a static IP is necessary? As long as the private IP address has not changed and both ends know what the private IP is there should be no need for a static IP address assigned to the remote host.

  • Remote assistance from Mac to PC

    Hey, my mother occasionally has issues with her PC and asks for my assistance. Before, I just used the Remote Assistance feature in MSN Messenger and fixed the issue using my Dell laptop. Now that I have made the FANTASTIC move to a MacBook, I am looking for a way to give my mother assistance, and it does not seem possible through Microsoft Messenger on Mac.
    Is there a way I can remotely assist my mother, on her pc, from my MacBook.
    P.S. She is in Iowa and I am in Minnesota, in case that makes a difference in your suggestions. Also, she is running Windows XP and I am running Snow Leopard.
    Thanks!

    I did download that earlier tonight, but I had not used it as I was unsure how to connect to my mothers computer in Iowa. I am not the best when it comes to networking, and this option looked like it would only help if my mothers comp was on the same home network as my own.
    How do I connect to her since we are on totally different networks? I am utilizing a shared wireless connection, and she is using a wireless network I set up for her at my parents home. Ideas?

  • How to use a fixed port for remote assistance in windows 8.1 behind a nat router freebox?

    Hello,
    Before to use remote assistance in windows 8.1, i need to configure my nat router freebox.
    But remote assistance ( msra.exe ) use a dynamique port and never the same.
    How to use a fixed port for remote assistance ini windows 8.1 ?
    And why i can't use easy connect ?
    i read that the router must implement the PNRP protocol. I think it's a propriatary microsoft's protocol unknow on my router.
    Thanks

    Hello,
    Very good. It's a big range ( 255 mini from 49152 )  for a single port but if it's the only one possibility...
    You are very helpfull ( i don't know if it's a good english but you make me very happy )
    Merci beaucoup

  • Remote Assistance without user intervention

    We use remote assistance on our windows 7 client. It's working fine. But sometimes i need to control a client without the need for a user to aprove.
    I found the following link that might solved this issue:
    http://community.spiceworks.com/how_to/show/1567
    But the thing is, on the few windows 7 clients i checked, i'm missing the helpctr\...\...\ folder tree.
    I searched for the helpeeaccept.htm and TakeControlMsgs.htm file, but could not find thm
    So this seems to be for windows XP. Is there a similar solution for Windows 7??
    Thanks

    Hi,
    Based on my understanding, Remote Assistance must need user's approval on Windows 7. This is by design.
    If you have any inconveniences or suggestions, please submit your feedback to our Product Feedback Team :
    http://mymfe.microsoft.com/Windows%20%207/Feedback.aspx?formID=195
    Juke Chou
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback on our support quality, please send your feedbackhere.
    Juke Chou
    TechNet Community Support

  • Application object for users to request remote assistance

    Hi
    I want to lock down my users' desktops by changing the Windows shell to Application Explorer but still want my users to be able to request a Remote Assistance session with the list of pre-defined operators.
    I have my policy setup and my users' can go to the Remote Management section of the Adaptive Agent and from there, request a remote assistance session.
    How can I do this without my users' having to go to the properties of the Adaptive Agent?
    Thanks
    rdc

    rgdacosta,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Remote Assistance in Corporate Environment - OfferRA not working

    Can anyone help me resolve a long running issue regarding Remote Assistance on Windows 7?
    We have recently upgraded many of our PCs from XP to Win7 but our Helpdesk are no longer able to use Remote Assistance on the Win7 PCs so I've been trying to get it fixed. I’ve read dozens of articles
    on various forums (including this one) and tried a wide range of suggested solutions - I’ve dug into the registry, tweaked DCOM settings, modified GPOs, messed around with Teredo and PNRP settings, amended firewalls and changed permissions – all to no
    avail!
    This is my test setup:
    Windows 2003 corporate domain
    Helper and target PCs both running Windows 7 Professional 32-bit. Both PCs on same subnet (actually on adjacent desks)
    Offer Remote Assistance GPO setting enabled and helper is a member of the listed group
    Firewalls on both PCs have default Remote Assistance rules enabled
    Target PC has Remote Assistance enabled and the Offer Remote Assistance Helpers local group is populated as per the group policy
    So far, so good.
    Now, Remote Assistance works fine when the target PC user solicits help through an invitation file or email (Easy Connect option not available though). However,
    offering remote assistance has never worked.
    This is the scenario:
    Helper runs MSRA.EXE /OFFERRA and is prompted for the name or IP address of the target PC
    On entering the address and clicking OK receives the message “Offering Remote Assistance: Connecting to the remote computer to get the logged in users…”
    At this stage Event Viewer on the
    target PC shows raserver.exe as running (which I thought a little odd as Windows 7 uses msra.exe for remote assistance). Nothing else appears on the target PC, i.e. no RA prompts
    After 15secs or so an error message is displayed on the Helper PC “Your offer to help could not be sent. Check the following: Do you have the correct permissions on the remote computer
    [I have]. Is the remote computer turned on and is it connected to the network [Yes and Yes]. Is there a network problem [No]. “
    In the event viewer of the Helper PC the following events are logged:
    Event id 9 - There was a problem interacting with COM object 833E4010-AFF7-4AC3-AAC2-9F24C1457BCE.  An outdated version might be installed, or the component might not be installed at all.
    Event id 13 - Remote Assistance started with:  /offerRA  as the command line parameters
    Event id 41 - Diagnosis Repro Attempt resulted in a failure.
    Event id 44 - Remote Assistance troubleshooting has confirmed the problem: Remote Assistance Easy Connect isn't available.
    Event id 30 - Remote Assistance has ended.
    This has been driving me crazy. Why is a supposedly simple admin tool so difficult to implement?
    Anyone found a solution for this yet?

    Hi,
    Based on my knowledge, To offer remote assistance to a remote computer, you must belong to the Offer Remote Assistance group on the remote computer.
    To resolve this issue, please check and add your account to this group.
    For Offer Remote Assistance to work, a certain amount of configuration is necessary, and the computers must be within a domain. This means that you (the system administrator) can determine who can offer remote assistance within the domain.
    Note If your computer is In a domain and you enable the Windows Firewall exception for Remote Assistance, Please make sure port 135 TCP is opened.
    Thanks!
    Andy Altmann
    TechNet Community Support

  • Can I sort PC names in most recent order in Windows Remote Assistance?

    When I right-click Remote Desktop, I'm shown a list of recent machines to which I've connected.  However, when I bring up Remote Assistance, the machines I've connected to are listed in name order.  In most cases, I want to connect to the
    machine to which I was most recently connected.  Is there a way to change the sort order for this?

    Hi,
    Please understand this sort order is by design. we can not change it.
    Karen Hu
    TechNet Community Support

  • To make use of remote assistance on my computer ,do I have to enable some services too?

    hi,
    besides enabling   allow remote assistance 
    a to  this computer    under external link in the properties of computer ,
    which is to ask asistance from distance to solve smal problems on the computer
    which services do I have to enable else ?
     do I have to allow   some  programs in  firewall   too   to  benefit of this utility of Microsoft like netvieuwer
    thanks
    johan
    h.david

    Hi,
    If you have never set remote assistance or make change to service, just enable the allow setting would be ok. If failed, please provide the error message here.
    Roger Lu
    TechNet Community Support

  • Remote Assistance missing buttons

    Hello,
    I'm not sure if this is the correct forum to ask this question.  I couldn't find anything related specifically to Remote Assitance.  I'm running into a strange issue where the Remote Assistance window is missing buttons.  For example, when
    launching Remote Assistance with the /offerra switch, the Next and Cancel buttons are just simply gone:
    The server I'm launching this on is running Windows Server 2008 R2 with Citrix XenApp 6.5 installed.  This issue happens to the published app in Citrix as well as launching it on the server via RDP and via the Console.  This was not an issue
    until I installed Windows Updates back on 11/9.  I removed all of the updates that were installed that day and it still results in the same.  I uninstalled/reinstalled the Remote Assistance feature and that has done nothing.  I've also tried
    multiple accounts and using an account with a brand new profile - in case it was just a strange profile issue.
    Any ideas??

    Hi Luke,
    I just had the same issue but only on one server using local profiles... I created a local admin account and it worked under that account.  Deleting and recreating my profile on the offending server has resolved the issue, although it was a headache
    getting a new profile:
    - deleted profile using local admin account (got an error about priviledges held by client)
    - manually deleted C:\users folder and profile SID key (and .bak key) from 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList'
    - after that logging on gave error 'Profile Service failed' then logged off
    - manually created C:\users folder and the SID key again under above location, then I logged on successfully with a new profile and the buttons appear again in RA
    There seem to be many people with this problem and several possible resolutions.  See
    http://forums.citrix.com/thread.jspa?threadID=263507&tstart=0&start=60 for some other options.  One says to copy the msra.exe from a Win7 machine, maybe that will work?
    Hope something here helps!
    Cheers,
    Simon

  • Can the remote assistance provided by Lenovo premium support be abused by a bad support technician​?

    Hi,
    I am considering purchasing a Lenovo software warranty. I did some homework and I know Lenovo use a 123rescue tool to do remote assistance, which my friend finds very helpful.
    Before purchasing it, I want to know how secure is this tool? Can this tool be used by any bad or corrupted technician from Lenovo to secretly install some Trojans or spywares on the computer during the remote access? Because as I understand, the remote access will give a technician ability to operate the computer, although the connect needs user's approval, but what a technician can do after the user approve the connect? I do not know it in details and a little bit curious.
    Although Lenovo is a very reputable company, it's still good to make sure that if a user give remote access to a technician, Lenovo do have a way to monitor the whole process and protect the user from any potentially bad support technicians, although I am very sure that it is very very impossible that such bad technician exists inside Lenovo's support team.
    Thank you!

    Hi guys,
    Seriously, I know I am paranoid, but could anyone give a response for my stupid concern?

  • Missing Remote Desktop Dialog Box in System Properties Running Under Windows 7 Ultimate SP1 But I Can Still See Remote Assistance Dialog Box

    Hello to everyone i am using Win 7 Ultimate SP 1 and when i go to system properties -> remote settings all i get is the remote assistance dialog box and i can't find the remote desktop dialog box. I can see the remote assistance dialog box but i
    can't see at all my remote desktop dialog box. Does anyone has any idea???????
    i have tried almost anything. I have opened exceptions in windows firewall for remote desktop. I started the remote desktop services manually but nothing happend, i still can't see the remote desktop dialog box and that's odd because i can see my remote
    assistance dialog box in system properties-> under the remote tab but as i said i can not see my remote desktop settings.
    Plz help.....
    Thanks in advance!

    Hi,
    First, please try the SFC command to check if you any corrupted system files:
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on
    Windows 7
    If this issue persists, it is recommended to perform system restore to get back to a previous time point to check what the result is:
    System Restore - Windows 7 features - Microsoft Windows
    Hope it helps.
    Alex Zhao
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Unable to take Remote Assistance from SCCM2012R2 Console

    Hi,
    I am Unable to take Remote Assistance from SCCM2012R2 Console. I am getting below error.

    Have you configured the Client Settings for Remote Assistance and is the account you are using granted access to perform a remote assistance?
    Kent Agerlund | My blogs: blog.coretech.dk/kea and
    SCUG.dk/ | Twitter:
    @Agerlund | Linkedin: Kent Agerlund |
    Mastering ConfigMgr 2012 The Fundamentals

  • Show of hands - Who can use Windows Remote Assistance

    Have you been able to use Windows Remote Assistance (not Windows Remote Connection) through an Airport Express?
    Yes, I have enabled port forwarding, disabled firewalls, enabling the DMZ.
    Thanks
    Paco

    You were right the first time, it's bananas, not milliseconds.  ; - )
    Regarding multiple ways of doing things in Logic, that is the heaven and h-ell that is Logic. It's what allows people to pull off all kinds of musical stunts in ways that other DAWs wish they could accommodate, and at the same time increases the learning curve tremendously.
    Not to minimize your frustrations, but there are far more serious aspects of Logic that need addressing more than common sense things such as displaying units of measurement for fade parameter values. But insofar as customers can tell, the company has turned a blind eye and a deaf ear towards its customers. So for all intents and purposes, Logic is dead. And it will be for some time, until -- and only until -- they surprise us all by coming out with a highly stable, thoroughly tested updated version that works on PPC and MacIntel. But unless an insider is willing to spill the beans about current development/improvements in Logic, we will simply never know what lies ahead.
    In the meantime, I would suggest, as did the previous poster, to use automation to create your long fades. Use the fade tool just to fix minor problems or make small crossfades, or to shape the attack of sounds. Use automation for anything that would otherwise resemble a fader move.
    -=iS=-

  • Windows Remote Assistance work?

    Hi,
    I collaborate with someone far away. I just bought a Mac and have found to my regret that the screen share function works only with other Leopard users. MSN Messenger for Mac does not have the Remote Assistance and Application sharing functions. Does the Messenger running on a Mac, but inside XP or Vista, have the Remote Assistance or Sharing functions?

    In the MS Messenger for Mac the Application Sharing and Remote assistance are disabled, so I was hoping before I install XP or Vista on my mac, to find out if it works when running XP or Vista on the Mac. As for why nit, I don;t know. I don;t know why it isn;t on MSN MEssnger for Mac so I was looking for a real world advisor.

Maybe you are looking for