BCM43227 Wlan Card Support for x230t?

Hi, everyone. I have a thinkpad x230t and recently changed my OS so I need to replace my WLAN card because there's no driver for intel cards.
I checked Lenovo documents, here http://download.lenovo.com/parts/ThinkPad/x230t_fru_bom_20140421.pdf
it says BCM43227 card with FRU number 03T9015 is supported so I made my purchase online. But upon boot on it gives me 1802 error saying it's not a proved card.
The BCM43227 card I have has ID/DEV numbers: 14E4/4358/14E4/0543. I assume it's the same card mentioned in the pdf. I have bios version 2.55, will updating bios solve this problem?
Did anyone have experience with this card? Please help!

Hi, George:
Thank you for your reply!
The seller who sold me this card claims it is the same product as 03T9015, it's just Lenovo makes different lables during different periods. I compared this card with 03T9015 pictures online and they appear to have the same Lenovo P/N number and the same Cyber Tan P/N number. But the card I have is mssing the FRU numbers. I'm attaching pictures of both.
My questions are:
1. Is my card realy 03T9015?
2. If this is not, will a real 03T9015 pass the whitelist check?
To my understanding, the way whitelist works is to check the card's Dev/Ven and Sub Dev/Ven numbers. Can someone who has 03T9015 post his/her numbers so I can compare with the one I have?
Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

Similar Messages

Satellite C850-108 - WLan card driver for Win 7

I have a Toshiba Satellite C850-108 and recently it just completely crashed.
Being stupid i never got chance to create a recovery disc etc for it.
I have a friend that sent me a disc to help reinstall windows 7.
However when i did this i lost all drivers and had to completely reinstall them as Iv been finding out which ones i need.
One big problem i have had is that when i install the driver for network controller it just refuses to install saying there is no network driver detected.
I have tried going to devices and yellow exclamation etc but still doesnt find anything.
I have download numerous drivers from Toshiba to try correct this but still have the same problem. I can only connect to the internet via an Ethernet.
It is as if I do not even have a Wirless card.
Im very puzzled and frustrated with this if anyone can help i would very much appreciate this.
P.s i installed using 32bit but when i check my serial number it states that it is 64 bit. Could this be part if the cause?.

Hi
As Im not mistaken the Satellite C850-108 supports the Realtek RTL8188CE WLan card.
So you need to install the Realtek WLan driver for the RTL8188CE chip.
You should be able to download the driver directly from Realtek page:
[Realtek Drivers & Utilities|http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level= 5&Conn=4&DownTypeID=3&GetDown=false]

GE cards supported for port- vlan based EoMPLS on 7600/sup720

Hi,
Can anyone explain/point where I can find de proper documentation where I can find the support for port- vlan based EoMPLS support cards on a 7600 with a sup720 engine on the CCO site ?
WHich GE port cards are supporting EoMPLS and which GE cards will support it not.

try
www.cisco.com/go/fn
-Waris

SDXC card support for cRIO 9031 Linux Real Time

The cRIO9031 with Linux Real Time did not support SDXC cards. Only SDGC with a maximum of 32GB supported by cRIO.
For logging application their is a need for more than 32GB => use of SDXC cards with 128/256 GB

Hi Schott,
Unfortunately, Linux does not have native (in kernel source) support for the exFAT filesystem (required for a device to be labled SDXC). As soon as such a filesystem is supported in Linux, we can enable direct support for exFAT.
In the meantime, there is nothing preventing you from formatting the card in a filesystem type that is supported on the target. FAT32 is unfortunately the most portable, accessible format, of course if you don't need to access the contents of the card from a Windows machine, you can use some of the tools on the RT controller to format the card in a more robust, journalling filesystem such as EXT4.

Is this card supported for 3d ray tracing optimized with CUDA?

On the system requirements list for after effects CS6, the 660 is not listed, but I just wanted to double check. According to nvidia's website the 660 supports CUDA optimized functions. There is also the fact that sometimes softwares fail to keep up to date with what hardware works. Is this one of those case?

For a list of supported hardware acceleration cards start at http://forums.adobe.com/thread/773101 and click the system requirements link
Most nVidia cards that are not in the list may be used for hardware MPE if they have at least 1Gig of video ram, by means of the hack http://forums.adobe.com/thread/629557

Line Cards support for SupEngine 7

Hi,
I would like to upgrade my 4507 core switch which currently has Sup IV to Sup7.
the core switch currently has classic line cards WS-x4506-GB-T and WS-x4224-RJ45V and my worry is these May not be supported..
The datasheet list these as part of the supported classic cards but I would wish to get a confirmation that this is indeed so and what issues I should expect? please advise...
Sent from Cisco Technical Support iPad App

Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Line cards shouldn't be an issue. (Don't recall us bumping into any line cards issues with the sup7.)
You may need to upgrade your chassis, though.

MicroSD card support for 808 PureView an Nokia N8-...

Hello community,
this is just an Information from my personal experience.
Yesterday I bought a 808 PureView and inserted a Sandisk Ultra Class 10 micro SD with UHS-I.
http://www.amazon.de/dp/B007JTKLEK
This memory card does not work with Symbian Belle Feature Pack 1 Software Version 112.020.0311 which is dated 2012-06-26. The same micro SD card does work very well in my Nokia N8-00 with Symbian BelleRefresh Software Version 111.040.1511 dated 2012-07-28.
I'm currently investigating which high speed 32GB micro SD will work in the Nokia 808 PureView.
Wolfgang
Wolfgang Exler
Stuttgart, Germany
Solved!
Go to Solution.

@Wolfgang_Exter
Using Sandisk 32GB Class 4 microSDHC in 808 without issue, although Class 6 advised for recording HD video.
Happy to have helped forum with a Support Ratio = 42.5

Graphic Card Support for pm9m-v

I was wondering if anyone could tell me what graphic cards my motherboard supports as i am about to purchase one. It is an msi pm9m-v running on win 7 with 1gb rddr ram.
Thanx

Wonkanoby is right. The only option would be a PCI Video Card. Forget about PCI Express and/or AGP cards.
Probably best to stick with onboard video.

PRI card support for analog/didgiatl calls

In Cisco 2621XM, I want to install a PRI card which can receive/accept analog as well as digital calls

Hi Jassi,
You can use the follwong modules for your requirement
T1 PRI/CAS
E1 PRI/CAS
FXO
FXS
E&M
But you require minimum Cisco IOS 12.2(8)T IOS version.
Regards
PSM

6GB MicroSD Card support for E90??

Hi,
Possible to run 6GB MicroSD card on E90 communicator??Please kindly advise.Thanks!
E90 Communicator V 07.40.1.2!!

Oh Great! Thanks alot guys!Appreciate the advise.Guess I will upgrade my external memory on E90
E90 Communicator V 07.40.1.2!!

PETITION FOR 4GB CARD SUPPORT!

Hello...
Nokia Users please join this petition for 4GB Card Support for Recent Nokia Phones & Upcoming New Nokia Phones!
Im sure there are owners out there who want the support of 4GB Card. Why is Nokia so Pathetic at listening to our concerns?
Its all simple! the recent models just need firmware teaking (update) so it support 3rd Party Memory Cards! We should benefit this feature from out phones. Theres no such thing as EXTRA hardware required to support 4GB Card ie 4GB Mini-SD, becuase it is the same dimensions n connections & all it needs is Firmware Update!.
However N-Gage, 6280 supports 4GB Card & there were sum screenshots of N80 working with 4GB Card using the old firmware v3.xx.x.xx
Nokia are so pathetic they lock the firmware by not allowing 100% compatible support for 3rd Party cards only Nokia branded Cards!
ALL WE WANT!...
However we (all nokia onwers) should have our phones supporting 4GB Cards. So uwners who agree please post your comment as i will forward this to Nokia Team. Its about time they took action to this!
If you find my post useful then click on
Kudos!Nokia N96 (v20.050 / RM-247)
www.shaysoft.net | Competitions!

hello,
i have an n80 ie, and at the moment i´ve a 2gb mini-sd, formated with >>>>FAT32 working in it.
At this site /discussions/board/message?board.id=smartphones&message.id=38078 , "shayesta", says, if you format your 4gb-mini-sd in your mobile, it will work. THIS IS NOT TRUE (maybe it depends on fw, but excluding the old 3.xxx , i dont believe at this moment in this.
I´ve buyed a 4gb mini-sd (NON-HC!!) ,when i try to format it in my n80ie, it says: "memory-card faulty".
When i use the 4gb-card in my pc or in my qtek9100 (mda vario) it works very well!
It may be paranoid, but i think nokia build a limitation in fw, so that u can´t use more than 2gb mem, because they want that we buy early a new mobile, that sopport 4gb officially. And probably with sup. for "sd-hc" , what on the other hand costs extra money for the "hc"(NON-HC WORX WITH FAT32 TOO, so thats not the difference!)
FACT IS, the n80 CAN work with 4gb, but nokia barricades this function. (I bet every n-series mobile could work since a year with 4gb-card if nokia wouldn´t be so obsinate).
I have not much hope for this great "4gb" fw-upgrade, but i wish the best.
so long, greetz (sry for my bad english, i´m a man from ger, german)
EDIT: removed retail link - MohjoMessage Edited by mohjo on 22-May-2007 04:02 PM

Is there anyone with ISL3890 PCMCIA wlan card? Terribly slow.

Hi!
Is there anyone with an ISL3890 PCMCIA wlan card? For me the highest transfer rate I can get is around 50 kB which is terribly slow (WAN & LAN). What can be the cause? Iwconfig says it is set to 54Mb.

Hi
This behavior can occur if the service is disabled or if the service is disabled for the hardware profile that you are currently using.
To enable the service do this:
1. Click Start, point to Programs, point to Administrative Tools, and then click Services.
2. Double-click the service that did not start.
3. Click the Log On tab.
4. Verify that the service has not been disabled for the hardware profile that you are using. If it has, click Enable.
5. Click the General tab. Verify that the service has not been disabled in the Startup Type box. If it has, click Automatic to have it start when you start the computer.
This was described here in the MS knowledge base article
http://support.microsoft.com/kb/241584

Satellite M100: Slow WLan data transfer with 3945ABG Intel Wlan card

Have just popped a brand new M100 with XP upgraded to SP2 onto our network and am having trouble with the Wifi.
Everything works, just really really slowly. Takes about 5 minutes to drag an MP3 off the file-server, web pages download at the speed of a dial-up modem and my beard doubles in length waiting for even a modest flash file to load.
Have tried the following so far...
- Speed is good on the ethernet cable, just not on the wifi.
- Connection speed is good on the wifi (11Mbps) and signal strength is excellent.
- All other laptops on the network are working fast
- I have updated the drivers to the latest provided by intel, no change
- I have applied all service packs and updates to XP (was a brand new box yesterday)
- Disabling various modes on the driver make no difference
- Switching off the QoS mode in the network panel doubled the trickle of data
I see from earlier posts that I'm not the only one who has had this problem with the Intel 3945ABG chips, but I don't see a solution posted. Has anyone had success is solving this kind of problem.
The data throughput is barely usable for internet access and quite inoperable for LAN filesharing or Skype.

Sounds weird. If PCMCIA WLan card gives you good speed it means that there is nothing wrong with your Internet connection, just with built-in wlan card.
You probably should use your warranty services or better yet to return it to the shop and get a new one straight away.
In my country if something brakes within a few days after purchase you don't need to send it to repair under warranty because the shop usually agrees to replace it with new one if they have it in stock.
There is one thing I think you better try: Take it to your friend who has wireless network or to the nearest free hot spot, connect to internet from there and see what speed you get.
It could be, though longshot, that your router has compatibility issues with this specific built-in wlan card.
For example I also have a slight compatibility issue between my d-link router and built-in intel wlan card, but it is about security protocols and not the speed.
Overall it seems to me that this intel wlan card is not that good.

Support for new Nvidia Quadro gpu?

When support for new Nvidia Quadro gpu? For example Nvida Quadro K2200 and K4200
Thk

What do you mean when you say "support"? All of After Effects OpenGL features already work on those cards.
The only thing that isn't supported on those cards is GPU acceleration of the ray-traced 3D renderer, which is an obsolete and almost entirely irrelevant feature. No more GPUs will ever be added to the list of cards supported for that feature.
Details:
GPU (CUDA, OpenGL) features in After Effects

Which is the best WLAN card for my lenovo x200 notebook?

Hello!
I hope somebody could help for me. I bought a new Lenovo X200 notebook but it hasn't got WLAN card. So I have to buy a mini PCI-E WLAN card. In my notebook there is a webcam so I find only 2 wlan cable (1 black and 1 grey). The question is: witch is the best WLAN card for me?
Intel 5100
Intel 5300
or
ThinkPad 11a/b/g Wireless LAN Mini-PCI Express Adapter
Please help me.
I can use intel 5300 (it has 3 connection port) if I have only 2 cable?

On the Lenovo X200 support page you will find the X200 Hardware Maintenance Manual which lists all the parts in the X200.
You will find there that the 43Y6493 is Lenovo's Intel 5100.
I don't work for Lenovo. I'm a crazy volunteer!

BCM43227 Wlan Card Support for x230t?

Similar Messages

Maybe you are looking for