Buddy Availability Column Not Working

I bought a MacPro and pulled my Contacts from .Mac. But my Buddy Availability Column in Mail doesn't work. I worked on my MacBook. Both are running 10.5.2. Not sure what changed, but now the MacBook don't display it either.
The interesting thing is Address Book will show the status but not Mail.
I've verified that Viewing->Show online buddy status is checked.

I've observed the same behavior since 10.5.2 came out. It seems to me that if the e-mail address of the person who sent you the mail contains any uppercase characters, you won't see the buddy status in the column in the inbox.
What's interesting though, is that you will see the status ball next to the e-mail addresses if you preview the note in the preview pane. Also, if you compose a note to the same person, you'll see the status globe as soon as you type in their address in the TO: or CC: field, even if it's not showing in the status column of the Inbox.
So my theory here is that for some reason, the mail app has some unintentional case sensitivity that's causing the status column to to work in the inbox, because as you say, it shows up in the address book and other places just fine. When I receive an e-mail from any buddy and their e-mail address comes across in all lower case characters, the status DOES display correctly in the status column.

Similar Messages

CRM Availability Check not working for certain Item Category

Hi there,
I have a situation where for certain order type/item category combinations, the availability check on the same material is not working.
The check is set up to happen in SAP ECC.
I have checked the config. under SPRO->CRM->Basic Functions->Availability Check->Availability Check using SAP ECC
as per many SDN posts on this, and everything looks fine.
The new item category, which was a copy of an existing one, works (i.e. gives availability) for certain order types, but not others.
If I create the same order directly in ECC, it works correctly every time.
I searched the code (from consultants who set it up originally) and can see nothing specific to the order type/ item category.
I also put a breakpoint on AVAILABILTY_CHECK function module in SAP ECC - it is not being hit, in the case where check is not successful.
Breakpoints in MV45AFZZ (Sales Order userexit) also not being hit, but they are hit for the Order/item category combination when it works successfully.
Any suggestions on where else this could be configured would be appreciated!
thanks,
David

Hi David,
One 'simple' reason for this could be that the copied item category does not have the
ATP Profile set up in the item category in the IMG. Make sure you have an ATP profile assigned in the area 'ATP Profile' in the item category.
Please see as well the SCN Wiki link:
Availability Check CRM-BTX-BF-ATP - CRM - SCN Wiki
Best regards
Christophe

Assigned To column not working in the quick search of a list

Hi, I have a list where we have a column called Assigned To, but it is a single line of text column type. Search is working since I am able to find other values in the list.
Now, when using the quick search, it is not working or showing results in this column.
Could this be related that this column is a manage metadata column type as default in SharePoint?
I have created a new list with this value but, as person column type and it is not working either.
Any ideas?

Hi Javi,
Please check and make sure your custom "Managed Property" map to the crowed property generated by managed metadata column, and set the manged property as "Searchable" then start an incremental crawl or full crawl.
For "Assigned To" column(e.g. crawled property should be "ows_Assigned_x0020_To"), I enabled the "Searchable" option for the manged property, then start an incremental crawl, and then search the
user in "Find an item" and it worked, you can try.
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Query on database column not working

Hi
i have a block which has around 40 columns.the block is based on a table which has more than 20000 records.When i try 2 make query on a Database column in Enter-Query mode its not working.It fetching all the records instead of the respective records
THe block property is said to yes
i have even set the query allowed,only propery of the column to YEs
Can any one help me out of this??? do i need to set any other property???

Thanks a lot for james and THomas and to all. The error is that i have missed the bracket for OR in my where condition ...Now im able to query all the columns.
Thanks very much...
I have one more doubt .i have a requirement in which when the user goes to the child block and makes a query is it possible to bring the associates parent records..wht code or trigger we need to rite ?
normally we do for parent block when we query we populate the child. is this can be done?

Sort Order Column not Working

I have set a sort order column on one of A VARCHAR field, but the functionality is not working. The sorting is enabled in the table view and when I sort by the said column it still sorts based on the VARCHAR values of the column instead of the other INT column I want to sort by. The logical SQL and physical query never even includes the column to sort. Are there any exceptions for the 'Sort Order Column' setting? Is there a config setting or data connections setting that I need to check to make this work?
Thank You!
Edited by: VNC on Oct 3, 2011 9:08 AM

hi,
can you give me more detailes like some sample column data like below kind
Like Ex: varchar month column it sould display based on month id
month : Fev-2011,Dec-2011,jan-2011 and month id 1 to 12
set your month id as sort order column of month name.
double click month name ->In general tab set the sort order column as month id
FYI...see the sample link
http://www.biconsultinggroup.com/obiee-tips-and-tricks/setting-a-sort-order-column.html
i hope helped you
THanks
Deva
Edited by: Devarasu on Oct 4, 2011 12:39 AM

Why sort on a column not working?

Run a query and then right click on a char. column (already displayed as key), then Sort -> either "Ascending According to Key" or "Descending According to Key", but the sort not working. We've tried both BEX query and Web, none works for the sort. We are using BI7.0 server, but BEX queries were created under BW3.5 BEX query designer.
Any clue why the sort not working?
Thanks!

Kevin,
How many characteristics have you in the query rows and which characteristic are you sorting on?
When you say it doesn work is anything happening?
Regards
Gill

Bfile columns not working for files in network

Hello all,
I have made a table with a column of type bfile. When i call the function bfilename(<alias-dir>,<filename>) it works fine as long as the alias-directory is mapped to a physical drive on the machine(Windows NT) on which the database is running. But if i specify a network directory which has been mapped to a drive say "F:/" then the same is not working.
Can anyone pls tell me what the problem is? And is there a solution to the same?
Thanks
Mazhalai

This is maybe a security problem. I think the "oracle" user is not allowed to access the network files.

Availability reports not working in SCOM 2012

Hi,
All of a sudden the availability in our SCOM 2012 is not working. I mean it just shows the plain white bar indicating UP(unmonitored) instead of the Green (available) or Red bar.
I tried to check the MS logs but could not find anything related to this issue. Please note that other performance reports are working fine. It's just the availability reports that's playing with me.
Any suggestions please?
Thanks
Srini

Hi Gautam,
This issue is resolved by restarting the SCOM services on all the MS. For some reason the MS were not able to insert the data in to the DW, once i restarted the services everything is back to normal.
Thanks.

Keyboard column not working - the column of keys containing screen bright, 2, x, w, s does not work - all else is OK. How do I fix?

The keyboard column is not working the column containing screen brightness, the number 2, X, W and S does not work. How do I fix this?

Some older scanners don't support presets. If this is the case, you can try this workaround as taken from this technical note Error: Bad Parameter | Acrobat.
In the Configure Presets dialog, choose the scanner attached to your computer from the Scanner pop-up menu.
From the File menu, choose Create > PDF from Scanner > Configure Presets.
In the Configure Presets dialog, click the pop-up menu to the right of the Scanner field and choose the scanner connected to your computer.
Click OK, and then choose Create > PDF From Scanner.

HT1218 my airport is not available or not working.

I don't know what to do. My airport is not working. so i can't use my wifi. May be you can help me. I don't know if i delete something; but i saw my airport logo in my utilities also. thank you.

Try restarting the router.

[RTM] Aero Peek not available or not working

hello, I have Ultimate Final from my MSDN subscription installed. First I installed it on a notebook (C2D, Nvidia 9600GS) and got to see Aero and it's features. Especially: Aero Peek.
Now I have it also installed on my Desktop - a much more powerfull PC (3GHz 4 core, Nvidia 8800GT). Aero Performance Index is 6.9. I have choosen an aero theme and Aero is basically working (transparency, snapping etc.). What is not working is Peek :( That means: I hover the mouse over the "Show Desktop" on the taskbar but get no transparent windows. I hover the mouse over a window preview on the taskbar but do not get the "show this window and make all others transparent".
And what's weird: The setting in the Taskbar properties is checked but grayed out/readonly. Also, in the context menu on the "Show Desktop" Button in the taskbar, the "Preview Desktop" entry is checked but grayed out/readonly.
In short: Desktop Preview (Peek) is "Enabled" but not working and I cannot change the setting.
What could be the reason for this?
Desktop machine is a dual screen setup. I disabled one screen but this made no difference. I switched between various themes but still no difference. I found a hint to a registry key, something in the line of "desktopPreviewDisabled" and it is set to "0" (=enabled as all the checkboxes indicate). I did set it to 1 and back to 0 - no difference.
Help please

Update: Peek does work with a second (the admin) user that has still all default settings.
With my normal user account I played around a lot to make it fit my needs. Now I really wonder which change caused Peek to not work anymore?
my aero peek was greyed out, I tweaked with theme fonts and a few theme settings then checked aero peek, It was ticked and UNTICKABLE it works now, lol haha create a new profile gimme a break geta clue, besides reg fixes abound for these greyed out
type of instances its always fixable one way or another, specially with a reg script to change the greyed out to usable tickable option once again, anyway safemode it if you have to and get your windows aero peek back peace out and stop blabbing about creating
a new profile for this troublesome greyed out aeropeek good lord you guys some of ya are far too extreme and way off base and troubleshooting resoultions to mundane issues... peace out njoy your pc time get multimedia tool heaven ...<<< www.mowtools.ourtoolbar.com
from novice beginner way up to xtreme pc elit power hungry users will find all the multimedia on and offline apps in this fine toolbar lifesavers get it while its f free peace out!
Long time WinXP user, skipped Vista and starting to like 7
Hi
Try the Aero troubleshooter.
Open Control Panel/Troubleshooting.
Under Appearance and Personalization, select the Display Aero desktop effects.
In the Troubleshooter dialog, click the Advanced link and place a
check mark in the Apply Repairs Automatically option.
Click Next to run the troubleshooter.
Let us know the results.
Thank You for testing Windows 7
Ronnie Vernon MVP

Availability Check not working for Item Cat TANN or YG05 in Btch Split

Currently working on implementing Automatic Batch Determination (BD) project and one fine piece is holding up the implementation (make or break for project).
In our QA System:
- In inventory we have a quantity of 2 for a material: 1 in one batch and 1 in another batch.
- Create an order with 2 line items with the same material number for a quantity of 1 each. Line item category is TANN
- When you generate the delivery the batch determination causes the items to split (even though you have a quantity of 1 in the line item).
- When you go into the delivery and open up the 1st line item and look at the 900001 line, BD chooses the 1st batch for a quantity of 1. Line item category is YG05.
- When you open up the 2nd line item and look at the 900002 line, BD chooses the 1st batch again, NOT the 2nd batch which it should.
If I change the line item category on the Sales Order to TAN and generate the delivery, BD correctly assigns the 1st batch to the 900001 line item and the 2nd batch to the 900002 line item. Which is correct.
Now for the strange part. The TANN item category and BD works find in our DEV Sandbox, but NOT in our QAS system.
I have spent two days now trying to find out where Availability Check is assigned specifically to Item Categories and any differences between our DEV Sandbox and our QA systems to no avail.
Our customers need the ability to be able to put the same material number on multiple lines of a sales order due to special pricing per customer within an order.
Can anyone direct me to some configuration or transaction that controls Availability Checking by Item Category. I have checked the 0VLP transaction and they are identical between our DEV and QA system for the TANN and YG05 categories.
Any help will be greatly appreciated.

In VOV6 the 'CP' Schedule Line Cat. has the Availability flag check. There were a few areas where I found an "Availability" flag and made sure there were all set.
But, I did finally find out what the error was:
Logistics Exec -> Shipping -> Basic Shipping Functions -> Avail Check and Transfer of Requirements -> Transfer of Requirements -> Determination Of Requirement Types Using Transactions
There are entries by Item Category. For
I/C = TANN
MRP type = PD
the Requirement Type was missing (if you look at the entry for TAN/PD you see an 11 in the RqTy column).
So I entered a 11 (Delivery Requirement) into the field and now the Availability Check works and I am getting the correct Batches and quantities during Batch Determination.
There is no entry for the YG05 batch split, so I guess the system just uses the Item Category of the main line item.
Thanks for the responses. Sorry to bother you I should have figured this out earlier.
Scott.

VC 7.2 personalize table settings - hide columns not working

I have table setting property activated in CE 7.2 VC UI , when I hide the columns, i am able to hide for that session, if I logout and login, I am not able to see the settings, all the columns are visible.
Are these settings are per session ? it is not like personalization where the user can save the settings for his login?

Hi,
In order to work with the personalization saving, you need to Enabling CCM Personalization of Table Views at Runtime
Here is the link to the user guide how to do this:
[http://help.sap.com/saphelp_nwce72/helpdata/en/33/7a565334b04c499cdc5ac6b2931231/frameset.htm]
Also in VC, you can set the Visible property of the specified column in the Table to False (In the Layout Board)
Best Regards,
Luba

"what u hear" available but not working (vista)

okay so i just upgraded my x-fi drivers to the latest release and the "what u hear" recording option became available... only problem is it doesn't function as it's supposed to, i.e. it's not receiving the audio signal from the output, so when i go to record i get nothing... i have it activated in the sound options and i have it selected as the recording source... what do i have to do to get it functioning? [email protected]

coldpenguin,
I can't recall much info for the Audigy but see if the option is listed in the properties setting. Open sounds and audio devices and go to audio tab. Click at Volume button of the 'Sound Recording' column. Now click on Options->Properties. Do you have that option listed?
Jason

ICal Availability Panel Not Working After Installing Yosemite

The availability panel for my corporate calendar no longer works after installing Yosemite. I get a message that says "This calendar does not support availability." This was working before I installed Yosemite. Is there a configuration I need to change?

Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Buddy Availability Column Not Working

Similar Messages

Maybe you are looking for