Business area missing in documents

Hi
I have few documents which are posted with out Business Area is there any solution, other than reversing the document and post, hence these documents are belong to previous year.
Regards,
Bhaskar

Hello,
There is no way that you can update business area.
If it is really critical situation to update business areas,
go to SE16N
enter the table
in transaction bar enter &sap_edit
enter
debugging mode gets started
then execute.
Edit the table (be cautious)
Note that you are NOT doing this in production.
Regards,
Ravi

Similar Messages

  • A/c doc not created and error msg "Business Area Miss-Match Check input"

    Hi,
    After creation of new Plant and Business area create a invoice , But my accounting document does't created and error msg show "Business Area Miss-Match Please Check Your Input". plz suggest me.
    Regards,
    Sohail

    Dear Sohail Rahman,
    Looks like the Business area has not been properly assigned.
    Business area can be created for three combinations:
    1. Business area by sales area
    2. Business area by plant and division
    3. Business area by plant and item division
    In your case, check whether the business area is maintained for the combination of plant/division and plant/item division.
    Hope this helps
    Thanks
    Murtuza

  • Business Area missing

    Hi,
    I need your guidance. I have run Automatic Payment Program. Clearing Document been generated. Now when i need to cancel the same I am getting error Business Area is missing. Client is having validation as no document get posted without Business Area. Please send your valuable suggestion.

    Please check whether in the original document generated from payment run the business area was entered?
    If not, you should configure the business area in FBZP > Bank Selection > Bank Account
    After this setting it will not make issue in reversal in future.
    But for the current document to be reversed, you can define a substitution for populating the business area.
    Regards,
    SDNer

  • Business Area missing in MIRO

    Hi all,
    I am facing problem with business area in MIRO. when I check MIRO for a PO and click on follow-on documents then it shows business area for few items but for some items its missing, please help me to solve the problem
    rgds,
    Shweta

    Hi Shweta,
    I cannot get the details of FS00 as mentioned by you as I am not linked to your server now.
    The GR/IR Clearing account is a centralized clearing and reconciliation account which works like a bridge
    which is getting debited on procurement and reversed during MIRO and is not linked to any Business Area.
    It is a Balance Sheet account which reveals the nature of goods received by your Plant whatever may be
    the storage location.  If the inventory account is there, it will show for which business area you have
    purchased.  During MIRO the GR/IR account becomes nil and it is an automatic internal posting through OBYC
    assignment. The other accounts will be vendor account which may carry BA classifications.  Hope you are clear.
    Best Regards,
    Sadashivan

  • Handling Business Area for sales documents

    Hi Experts,
                   My requirement is that , I have to change the default Business area  , determined by the system , at the time of sales document creation . For Eg: I have two business areas 0001 and 0002.
    When i create a sales document , by default system determined business area 0001. But  if certain conditions are met , i have to change the business area to 0002. and finally when we post the document to the Accounting after billing , the document must hit the business area 0002.I could able to change the business area in the sales documents through the user-exits available for Delivery document and Billing document .But when i post the document into accounting , the entries are going into wrong business area . How to handle this situation.
    Thanx in advance.
    Durga.

    You mean there is a different business area in sales and account document after creation? Are you sure?
    Or your user exits might not be updating properly? else system might be re-defining business area in accounting thru configuration.
    Regds
    Manohar

  • Business Area Filter in Document Journal

    Dear All,
    S_ALR_87012294- Compact Document Journal
    The above report can be processed for a particular User/ Document type etc , the client requires above report for a particular business area . How to resolve the issue, useful answers will be rewarded with points.
    Regards
    Milind Nair

    Hi,
    U can get the report as required by your claint, use the S_ALR_87012287-  Document Journal, form this report u can select the document type/user/business area from dynamic selection or u can create the layout as required by claint from this report, and put it as default, so ever time when ever execute the report no need to select from dynamic selection.
    please assign points if its usefull.
    Regards
    sai krishna

  • Need you help to update business area for FI Document  generated  at migo

    HI guys
    I am looking for MIGO Badi or user-exit which will help update business area which is mandatory field but when movement type 101and the account assignment tab is not there when the movement type is 101 at the time of GR so i want to update it BA in for FI Document generate  in background so as to complete the GR. 
    Thanks

    Hi Niraj ,
    I Have check the badi but there is no structure of FI item data  generated for which i can insert the BA for the line item generated
    Thanks
    Regards
    Nilesh

  • How to fill empty business area in posted documents?

    Hi SAP Team,
    My Client need to fill the field "business area" for documents already posted. However, today all posted documents, have a rule + validation or substitution for this field.- fill business area to be filled in. For year 2013, my client want to re-assign business area at balance sheet accounts but the problem is how to that at customers, vendors account that are reconciliation accounts. Do you have any sugestion?
    For balance accounts, for eg:, if my total in a gl bank account is in debit (no business area at this gl account level), my client idea is to credit that bank account without business area and debit it again but filling the business area. For Customers/Vendors, is not that easy because that gl account does not allow directed posting.
    Do you have suggestion to handle this?
    Thanks a lot,
    Kind regards
    Antónia Farias

    For vendor / customer postings you have to create reconiliation account wise dummy sub ledgers.
    E.g. 1.You have 3 recon. a/c's for customers then you cretae 3 dummy customer codes.
           2. Post a consolidated entry using this dummy accounts(one line item with B.A and the second
               line ietm without B.A)
           3. So at any point of time these subledgers should have zero balance.
           4.  Please block these sub-ledgers once your postings have been finished.
    Rgds
    MBN.

  • Business area for billing document

    Hi Experts
    Document type RV which is billing document (VF01) is auto generated line item for service tax code but while generate the GL report business area is not picked for this GL. Business area is picked for other line item in same transaction but not for this. New GL is activated, field status checked. Kindly guide me.

    Hi
    How is service tax mapped for getting entries generated through VF01. Is it mapped using With Holding tax or through tax on sales/purchase? You need to make sure that FIN_GSBER is a scenario for New GL. Are you using Document Splitting in New GL? If yes, check for the following things:
    1. The Business Transaction Variant assigned to Document Type RV allows Tax on Sales/Purchase Item Category (05100) and With Holding Tax Item Category (05200)
    2. Check the Transaction Variant Assigned to RV. It should be 0200.
    Regards
    Sanil Bhandari

  • Business area in accounting document

    Hi guys,
    I have a problem in accounting document generated by VF01.
    The business area displayed is retrieved from TVTA while the user wants the business area to be taken from T134G.
    Do you have an idea what is the basis in getting the value for the Business Area (gsber)???
    Do you know also of user-exit that will perform such condition?
    Thanks.

    Hi
    It means it's a parameter (under the company code) used by accounting. In generally a sales area is linked to only one business area: so in accounting it can manage the sales from different area by business area:
    I.e. for the same company code, it can use the business are to separate the amount of sales from different sales area.
    I think the account document should have the same business area (b.a.) of the sales document, if u change it in exit EXIT_SAPLV60B_008 u could have different b.a. in sales and accounting document.
    So the best solution is set the correct b.a. in the sales document and then SAP'll move it to the next documents automatically.
    U can decide which rule has to be used to determine the B.A., these rules is set in the sales area (so TVTA table): field TVTA-REGGB:
    001 - B.A. from T134G (your case?)
    002 - B.A. from TVTA
    003 - B.A. from  based on SalesOrg/DistCh/ItemDivision (from TVTA)
    In this rules are not good for u, the best solution is set the correct B.A. in sales order, so u can use the user-exit USEREXIT_MOVE_FIELD_TO_VBAP and/or USEREXIT_MOVE_FIELD_TO_VBAK in inlcude MV45AFZZ.
    If you want to allows to set the B.A. manually u should implement the exit USEREXIT_COBL_SEND_ITEM and/or USEREXIT_COBL_SEND_HEADER in MV45AFZB: in the sales document the b.a. can't be changed manually by default.
    Max

  • Business Area in Billing Document

    Dear all,
    Can you please let me know how the business area is determined in the billing document ( VF01) in Item details (Accounting & Account Assignment).
    There is no Assignment of business area at sales area or material / plant level.
    I'am creating Billing document based on delivery.
    Appreciate your response.
    Thanks and Regards
    Mahesh

    Hi,
    Business area can be determind ovf2 ovfo ovf1.
    u assign ur plant ovfo.
    Define Rules By Sales Area
    For business area account determination, you have to define for each sales area the rules according to which the SAP System should find a business area.
    Note
    If you do not specify a rule for a sales area, account determination cannot be carried out for each business area.
    Currently you cannot change the rules for determining the business area in Customizing.
    Requirements
    The sales areas must already be defined.
    Default settings
    In the standard SAP R/3 System, three rules are predefined for automatically allocating business areas during revenue account determination:
    Rule 1: Business area determination from plant and item division
    Rule 2: Business area determination from sales area
    Rule 3: Business area determination from sales organization, distribution channel and item division
    Actions
    1. Check for each sales area the rules according to which business area account assignment should be carried out.
    2. Specify one rule for each sales area for determining the business area.
    The defined sales areas are automatically displayed for maintenance.
    Best regards,
    venkataswamy.y

  • Business area in FICA Documents

    Hi,
    We are not using business area functionality.
    Neither did we make any config for this. Still there are several documents which gets posted in business area 0001.
    How to get rid of this?
    Regards,
    Paresh

    Hi
    You need to assign: Define Short Account Assignments for Transfer Postings to Cash Desk
    SRPO
    Financial Accounting (New)
    Contract Accounts Receivable and Payable
    Business Transactions
    Payments
    Processing Incoming and Outgoing Payments
    Cash Desk/Cash Journal
    Define Short Account Assignments for Transfer Postings to Cash Desk
    Regards,
    Alla Basha
    AES

  • Business Area Missing in Settling to Gl

    Hi,
    Business Area is missing while settling  order to Gl. in Ko88. I had given validation for Gl, it was working we are able to go order(ko02) & insert Business area in settlement rule for new order. But there is a problem with Partially settled orders , in settlement rule the Business area position is greyed.
    Pl. provide the solution at the earliest, how to go about in settling the old orders with Business area.
    Regards,
    Surya Maddula

    Hi Shweta,
    I cannot get the details of FS00 as mentioned by you as I am not linked to your server now.
    The GR/IR Clearing account is a centralized clearing and reconciliation account which works like a bridge
    which is getting debited on procurement and reversed during MIRO and is not linked to any Business Area.
    It is a Balance Sheet account which reveals the nature of goods received by your Plant whatever may be
    the storage location.  If the inventory account is there, it will show for which business area you have
    purchased.  During MIRO the GR/IR account becomes nil and it is an automatic internal posting through OBYC
    assignment. The other accounts will be vendor account which may carry BA classifications.  Hope you are clear.
    Best Regards,
    Sadashivan

  • Number range based on different business area for same document type

    Hi All,
    The scenario is my client wants to give the different number range for a particular document type based on different business area.
    Is there any user exit by which I can restrict the same.
    Regards,
    Meenakshi

    Hello,
    Document number ranges are created per company code and fiscal year. You cannot create / restrict the document number ranges per business area.
    Business areas a independent of all organizational values, they cut across all company codes.
    Regards,
    Ravi

  • Perviously synced Typekit fonts are missing in document and I'm unable to sync them again

    Hello,
    I synced the files a while ago and they all show as synced in my typekit account, but in the actual Illustrator file they show up missing and when I am trying to sync the missing fonts I get an error that states that I should check in my desktop typekit menu. Where I did check, but it's been stuck with the syncing spinner in the middle for a while now.
    I did restart everything. I logged out and logged back in....I don't know what else to try. Any sugjestions?
    Oh and I did try syncing a new one to see if that would work and that didn't happen either.
    Best, Jezabel

    Hi Jezabel,
    I'm sorry that you ran into trouble with this.  Please try Solutions 5, 6, and 7 from this help page:
    http://helpx.adobe.com/creative-cloud/kb/creative-cloud-app-doesnt-open.html
    If that doesn't solve the problem, you may also use the "Contact support" link on that page to speak to a support agent and debug the problem further.
    Once the tab in your Creative Cloud application loads correctly again, the fonts should be available to all of your desktop programs.
    Please give that a try, and let me know if you have any other questions.  Best, 
    -- liz

Maybe you are looking for