Downpayment at whole Purchase order level

Hi Expets,
Good day!!
I have a sceneario, downpayment to be create at purchase order level not on purchase order line item level.  Downpayment is belongs to whole purchase order level.
As per sap standard system is asking Item to be entered (mandatory) when we assiging the purchase order at downpayment docuemnt.
My business requirement is downpayment should be at whole purchase order level and not item level (if i have 100 line items in a purchase order business does not want to create 100 downpayment document,) single downpayment document and to be tracked in purchase order.
Plesae guide me any configuration or work around solution.
Regards
Chandu

Hi ,
You can do down payment at pheader level . if you actiavted LOg_MMFI_P2p business function . Please lookat docuemnt on SCN .
You will find that through this business function you have both option of down payment at line item level and header level ]

Similar Messages

  • Freight cost condition for the whole purchase order (Header relation)

    Maybe you could help me out with the following difficulty regarding freight costs for the whole purchase orders from the mass maintenance transaction MEK1 for pricing conditions.
    I try to have one freight condition for the whole purchase order.
    For instance, I maintained in the transaction MEK1 for the condition FRA1 the key combination vendor and purchasing organization (table 44) and entered an absolute value of X EUR.
    Unfortunately this condition will not pulled as header costs in the purchase order, because I would have had defined an access sequence in the condition type, but this is not allowed for header conditions in general.
    Do you have any workaround to maintain an item condition, which works like a header condition, so that I am allowed to have an access sequence and be able to maintain MEK1?
    Any comments and help are very welcome.
    Many thanks in advance
    Sabrina

    Hi,
    Fright and discount conditions are called supplement conditon type and  they are always matained with main condition type.
    Please check PB00 condition type in m/06 transaction. You will find pricing procedure assinged as RM0002 to PB00 condtion type.
    So you can maintain fra1 and other supplement condtions in main condtion only in MEk1 trasnaction.
    By selecting the line item and then shift + F7 you can maintain fright or discount condtions for PB00 condition types with out having access sequence for supplement condtion types.
    Regards,
    shailesh Mackwan

  • Creating Commitment Items In Purchase Order Level

    Hi Friend,
                    I need some information on How to create commitment items  at Purchase Order item level. Any  BADI's,  please suggest me.
    Thanks in Advanced
    Shiv'.

    Hi dude ,
    Here i am not suppose to  create any new tab at item level , could you  little bit clear............,
    Thanks .
    Shiv'.

  • AP Module - Purchase Order Level Detail

    Guys, is it safe to say that there is limited information for a Purchase Order available via Financials - AP modules?
    This is what i see:
    Purchase Order Date
    Purchase Order Item
    Purchase Order Number
    Where is some additional PO level detail? Is it available in the "Procurement and Spend" analytic module? Thanks for sharing your insight into this.
    Thanks for your help.
    Regards,

    Guys, any pointers on this is greatly appreciated.
    Regards,

  • How can I cancell a Downpayment against a Purchase Order?

    Hello SAP experts/friends!
    Is there a way to cancel a downpayment without processing it?  I am being told that the only way to cancel it is to actually process the invoices.  I don't want to process the invoices against the line item where the DP was issued against.  The decision to purchase line item 10 has changed since a few months ago. Line item 10 has been replaced by line item 20.  The DP paid against line item 10 still stands against this vendor.   In other words, we want line item 10 deleted, but the system won't let us delete it, because there is an outstanding DP against it.
    Any ideas?  please let me know!  Thank you, in advance!
    Rgds,
    Arocel

    Please cancel the invoices and GRNs for line item 10,you will be able to delete line item 10 and then  proceed with line item 20.
    Generate credit memo for posted invoices.
    Edited by: Din@Das on Jun 2, 2011 7:06 AM

  • Relation between Version and Release Strategy at Purchase Order level

    Our requirement is as follows:-
    Case: "Document Type" + "Purchase Group"+ "Price-A" ==== Release Strategy "XX" , and it got release by approving authority "YY"
    now, if i edit the vallue of above case to "Price-B", in such a case a new release strategy should trigger and it should go to approving authority "ZZ" in all the cases
    Price-A can be equal to Price- B, Less than or greated than.
    I come to know that, to acheive this we need to activate the version management, MM>>Purchassing>>Verion managemet>>for external document ( Here i have maintaned the veriosn for "F", and "Dcoument type" for "Purchase Org"
    Now the issue is when i created the version with REVNO and CEKKO table, and when i maintain the version for the release strategy , system dont show the tab of release strategy in PO screen, means release strategy is not getting applied on the PO,
    and when i delete the version condition, we can see the release strategy tab in the PO.
    Thanks in advance,
    Vikas Rander.

    Our requirement is as follows:-
    Case: "Document Type" + "Purchase Group"+ "Price-A" ==== Release Strategy "XX" , and it got release by approving authority "YY"
    now, if i edit the vallue of above case to "Price-B", in such a case a new release strategy should trigger and it should go to approving authority "ZZ" in all the cases
    Price-A can be equal to Price- B, Less than or greated than.
    I come to know that, to acheive this we need to activate the version management, MM>>Purchassing>>Verion managemet>>for external document ( Here i have maintaned the veriosn for "F", and "Dcoument type" for "Purchase Org"
    Now the issue is when i created the version with REVNO and CEKKO table, and when i maintain the version for the release strategy , system dont show the tab of release strategy in PO screen, means release strategy is not getting applied on the PO,
    and when i delete the version condition, we can see the release strategy tab in the PO.
    Thanks in advance,
    Vikas Rander.

  • How to Configure Invoice Address tab on Purchase Order - Header Level

    Hi Gurus
    Please assist
    My client want to add the Invoice address on the Purchase Order level Tab, it must be automatically pull through to all the Purchase Orders as they have one Invoicing address.
    Currently the suppliers send invoices to plants instead of HEAD OFFICE for payment
    Regards
    Susan

    Hi,
    Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
    you can have these condtions in KONV table.
    In item level vbrp-posnr = konv-kposn.
                      ekpo-ebelp = konv-kposn
    at header level as said in the below thread
    Just see this and get back if any concerns
    Regards
    Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
    Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

  • About purchase order print and ME9F

    Hello, I want to exclude the purchase order list which have been set delete indicator when i run ME9F, how can i get it? ths

    Hi.
    The reason deleted PO is shown in ME9F is at following coding.
    RM06ENDR_ALV
       SELECT * FROM v_ekkona INTO TABLE xekkona
              WHERE ebeln IN r_objky        AND kappl IN r_kappl
                AND lifnr IN s_lifnr        AND kschl IN s_kschl
                AND ekorg IN s_ekorg        AND erdat IN r_erdat
                AND ekgrp IN s_ekgrp        AND eruhr IN r_eruhr
                AND bedat IN s_bedat        AND vsztp IN r_vsztp
                AND bsart IN s_bsart        AND vstat IN r_vstat
                AND bstyp IN r_bstyp        AND aktiv EQ space
                AND loekz EQ space          AND snddr EQ space
    So system only check if delete flag(LOEKZ) is set to the EKKO(Header).
    I guess you are only set the delete flag only for item level.(EKPO-LOEKZ).
    Regret to say, EKKO-LOEKZ is not set automatically even if you set EKPO-LOEKZ with items.One of the reason, I think, is delete flag for item is not
    always deleted of whole purchase order.(ex, there are 3 item and 2 of them are
    deleted but 1 item is active,in that case, PO is active.)
    Even if you set delete flag for all item, in standard function, EKKO-LOEKZ is not set.*How to set EKKO-LOEKZ is run archiving job.(Set delete flag).
    As a result, in standard function, there are no way to exclude the PO with delete flag only with item level.
    If you strongly hope this function, how about to copy the report RM06ENDR_ALV and change the coding like "If delete flag is set for all item, delete the po from internal table xekkona etc...
    Best regards.
    Keiichiro

  • SUS Invoice against Purchase Order

    Hi Experts,
    How to create one SUS Invoice for one whole purchase order directly?
    Let us say – there are two line items in a purchase order. In SAP a GR is created for the material & a Confirmation is created from SUS and released
    in ECC. Supplier wants to create only one invoice for the whole of this purchase order. 
    When Supplier open the “Create Invoice”, he has an option to create Invoice “For a purchase order” which lists the Purchase Order (which has GR and SES created) but when “Create Invoice” button is clicked–  SUS shows a success message that “No suitable or open items found”?
    Any idea on what is wrong?
    Thanks

    SAP confirmed via a OSS Incident - this is not possible in the 702 SUS.

  • Need to control Closure of Purchase Order on Creating GRPO or A/P Invoice

    Hi All,
             I have created a single Purchase Order with multiple Line Items. This Purchase Order is to be executed every Much. We do not wish to give the Vendor a new Purchase Order Every month and want to use the first Purchase Order for reference purposes.
             Can I create a GRPO or a A/P Invoice for the Whole Purchase Order without closing the Purchase Order.
             So when my service is completed I can Close the Purchase Order Manually.
             My Purchase order is Item Type.
    Please Assist.

    Hi,
        Thanks For your reply , I do not wish to do that way reason is
    I am giving a PO to the vendor  for 10 QTY (this 10 QTY is for every month). so every month I will do a GRPO / A/P Invoice for 10 QTY. BUT to the Vendor i need to send a PO of only 10 QTY  (and not a PO for 10 QTY per month)
    e.g.  1 Jan 2012 create PO  with doc number 1 for One Item with 10 QTY (I print it and send it to the Vendor)
             on 31 Jan 2012 i create a A/P invoice against the PO (this will close my PO)
             Again on 29 Feb 2012 i wish to create a new A/P Invoice using the Same PO Doc number as my reference (I DO NOT wish to close my PO of Doc number 1)
              I dont want to create a new PO for Feb 2012. (Reason is i want as my references with my Vendor to flow on PO number 1 and if I create a new PO for month of FEB 2012 there is a possibility of the vendor being given one more PO which i dont want to happen)
             I want all subsequent A/P invoices to use my First PO as my Based Doc.

  • Internal Order Budgeting with Purchase Order

    Hi,
    I am creating a purchase order for a material with account assigned as Order.
    I have maintained a substitution wherein from a cost center Internal Order is derived.
    I have created an Internal Order with Category - Overhead and activated the availability control for the Order. Also maintained the Budget for the Internal Order.
    Now when I am creating the Purchase Order and giving the Cost center, it is deriving the Internal order but not doing the availability check.
    What can be the issue in terms of Configuration or Am I missing any steps.
    Please help
    Regards
    Kami

    Thanks Eli,
    If I activate the committment Management at Controlling Area level and the order type, the budget will be consumed at the Purchase Order level itself. I hope I am right ?
    But I want , at PO level only the control and check (in terms of error message and the system should not allow me to save the PO) and not the consumption of budget. I want to utilise the budget only at the time of issuance of the materials.
    Can we achieve this without Committment management active or is it mandatory?
    Any help on this.
    Thanks and regards
    Kami

  • Purchase order Document date in AP Downpayment invoice PLD

    Dear All,
    Is it possible to capture purchase order Document Date in AP Down payment invoice PLD.My client want like this.I have tried,but i am not able to capture this field in AP Down payment invoice PLD.please give me the solution for this,If it is possible.
    Thanks,
    Silpa.N

    hi silpa,
    Create a user defined field in row level of marketing documents.
    Apply formatted search using query
    Select $[OPOR.TaxDate]
    select auto refresh
    when changing field Document Date in header level.
    On copying purchase order to ap downpayment invoice Document date will copy to it.
    U can also bring it to PLD by creating database field with table DPO1,column U_XXX
    Hope it will solve problem.
    Jeyakanthan

  • Purchase order at item level in Invoice Tab 'GR-Bsd IV' want default

    Dear Friends
    While making Purchase order at item level in Invoice Tab 'GR-Bsd IV' should be came by default . what is its configuration setting.
    Regards,
    Mahes

    Hi Mahesh  try ME21N t-code

  • How to extract tax amount in item level from a Purchase order

    Hi experts,
    How to extract the tax amount data for each item in a Purchase order.
    I am using the data sources 2lis_02_itm, 2lis_02_scl, 2lis_02_S012.
    Please provide me which data source brings this tax amount data in item level and also the technical
    field name of tax amount.
    <Removed by moderator - soliciting points for answers is frowned upon>
    Regards,
    Bhadri M.
    Edited by: Arun Varadarajan on Nov 14, 2008 3:55 PM

    Dear Bhadri
    Did you look 2LIS_13_VDKON data source whther it can throw or not for billing related. Here you should look some billing conditions relates to particular document like taxable or not.
    (KAWRT, KAWRT_K, BIWGEO)
    Those informations will be maintained each with billing conditions.
    May not sure. Please look.
    Raju Saravanan

  • Want to see combination of Purchase Order and A/P report at material level

    Hello,
    Anyone familiar with an InfoProvider that will show a combination of Purchase Order and A/P data combined?
    I'm specifically looking for a source that includes the PO information at the <b>Vendor / Material</b> level with order value and quantity at the time the PO was created AND accounts payable data at the <b>Vendor / Materia</b>l level with the invoiced amount and quantity (which may vary for the PO amounts).<b></b>
    Thank you,
    Jim

    Hi
    Have you seen all of the follwoing datasources......
    http://help.sap.com/saphelp_nw04/helpdata/en/df/fbb0d62f3a794d98d23609d17e1610/frameset.htm
    Hope this helps
    Regards
    N Ganesh

Maybe you are looking for