Employee business partner ID showing up in "Service Team" column of query

Hey everyone,
We have a strange problem appearing in our Solution Manager. In workcenter, when we build a query that shows the "Service Team" column we find that while the "Support Team" shows up for most of the results (which is correct) a few of the results displays employee business partner IDs instead (despite the message having Support Teams assigned to them).
Through investigation we've found out that all of these business partners are assigned to roles in the message (reported by, message processor, functional analyst etc etc.) Interesting to note that the business partner ID showing up in the "Service Team" column is always the LAST business partner record on the "Business Partner" tab of the message.
So if the business partner tab looks like this:
Partner Function       Partners
Reported by              A1
Support Team           B1
Message Processor C1
Functional Analyst    D1
D1 would show up in the Service Team column despite there being a Support Team assigned. If a new partner is assigned and a new record appears below the Functional Analyst D1 record, that new partner's ID appears in the "Service Team" column instead.
Does anyone have an idea of why this could be happening to these few recordcs and how to ensure the "Support Team" is the value showing up in the "Service Team" column?
Thanks,
Laurence

Hi,
You can go to the infoobject setting RSD1 and check the help f4 attributes and select only those which you want. this afect for infoobject 0COSTCENTER not for any specific query.
regards
Gopal

Similar Messages

CRM employee (business partner) & org unit extraction question

Hi all,
I have a question regarding extracting business partner and org unit in CRM. Basically user wants to report on employee level and org unit level.
When I looked at the org unit hierarchy datasource (0BBP_ORGUNIT_HR01_HIER), it does not include the employee. I also tried the DS 0BP_UNAME_ORGUNIT_ATTR, but that does not give me the org unit of an employee.
Any hint is highly appreciated.
Best regards,
Ben

HI
Try this DS 0CRM_POSITION_ATTR,here u will get the org.unit,but u need to add the users (employees) in the data source.
Sridath..

Align Employee Business Partner Master Data Between SAP HR and SAP CRM

We have been using SAP R/3 since 1999 and crm since 2004, in 2008 we implemented SAP HR. Historically our employee data (for those business units using CRM) has been maintained in CRM directly however since the HR implementation all employees now exist in HR and the companies whole organisational structure exists there also. I am implementing a new CRM project for a business unit that has never had crm before and as a result there employees do not exist in CRM. I am thinking about leveraging our recent HR implementation to take this business units employee data from SAP HR into CRM rather then have to create this data again in CRM. Is it possible to filter the integration between hr and crm to facilitate the transfer of a specfic subset of employees eg from one specific business unit? If so how is this achieved? Are there any negative impacts of such an approach.
Thanks in advance
Eddie

Hello Eddie,
I hope the following notes 312090 and 1259797 will help to answer your queries. The note 312090 speaks in details about the various filters.
Best Regards, Adil

List service tickets and activities by Business Partner

Does anyone know of a function / BAPI that can be passed Business Partner ID and list all Service Tickets and activities associated with it. Many thanks

The only FM I found list the order guids and is CRM_BUPA_READ_ORDER_OBJECTS.
I would advise you to pass the date from and to as well, else this might create performance problems.

Err while confrm Business partner does not exist (Notification E R1 201)

I am for the first time into CRM serv implementation.I have 2 issues. Please provide your valuable suggestions at the earliest.
I raised a serv order, released items, confirmed it and changed the status to complete. now when i try to raise an invoice, in billing due list, serv order num is showin up but not confirmation number. Billing relevance in item category for
service item in Serv order ---> Order related billing acc to order quantity
confirmation item category--> Transaction related billing after completion.
The reason i expect is that i have used a crm employee as employee responsible as HR is not yet in place. At the time of confirmation and data transfer to r/3 system is throwing a message that BP doesnot exist. Long text is as follows
"Business partner does not exist (Notification E R1 201)"
I am unable to trace out which BP is it unable to find. The Sold to i am using is on the other hand available in R/3.
1) Is service confirmation incomplete and hence is not appearing in Billing due list or is there any other reason?
2) How can i analyse which BP number is not avilable. i.e.. how can i check the contents of bdoc system is sending and because of which value of BP is the transfer getting stopped
Regards,
Kiran

Hi
The link is not working.
The contents of the message is as follows
follow all the following steps
Setting up Transfer of Employee (HR Master) from R/3 to CRM
1. Logical system XXX assigned to R/3 client XXX. Logical system YYY assigned to CRM client YYY view through SCC4
2. Create RFC Destination YYY for CRM client YYY in R/3 and
Server ID with user details and client YYY.
3. Transaction code SALE : Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Maintain Distribution Model and Distribute Views. (Direct transaction code : BD64)
Go to change mode and select Create Model view.
You get a popup. Fill in the details Technical name, short text and validity
Select Add message type from the application tool bar.
Fill in the following details
Model view : HRCRM
Sender logical system : XXX
Receiver logical system : YYY
Message type : HRMD_ABA
Note : Only this message type works for employee transfer.
4.Save the model. From the same screen select the distribution model and from the menu Environment  Generate partner profiles
Dont change anything in the next screen. Simply Execute.
4.Distribute the distribution model HRCRM
Select the distribution model. From the menu bar, Edit  Model View  Distribute
You get a dialog showing the receiver logical system. Execute.
You get a log Model view HRCRM has been created in target system YYY
5.Go to the CRM system and check up whether this model has been created.
Transaction code BD64
The model has got copied. No changes can be made in CRM
6. Generate partner profiles for the distribution model in CRM by selecting
Environment  Generate partner profiles.
In the next screen, do not make any changes and Execute.
Partner profiles can be seen in transaction WE20
Delta Download Settings
7. So far, the above settings will ensure the initial download. However for any changes / new employees to be transferred, i.e delta changes, changes pointers need to be activated.
In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers Generally (BD61)
This activates change pointers globally for all message types.
8. In R/3, Transaction code SALE, Application Link Enabling (ALE)  Modelling and Implementing Business Processes  Master Data Distribution  Replication of Modified Data  Activate Change Pointers for Message Types
Activate change pointer for message type HRMD_ABA
9. CRM : Number Assignments. Generally, there are 3 types of number assignments (also called switches) when business partners are created.
1 The system uses the number from the general internal interval of the number
range object BU_PARTNER
2 The system uses the number from a specific internal interval of the object
3 The number is transferred from HR and a prefix is added. In this case, a specific external interval, which must be defined as XX00000000 (upto
XX99999999), is used (where XX denotes any two letters).
The number range object for all switch positions is BU_PARTNER, with the interval depending on the switch value.
For switch value 1, the system uses the internal standard interval, otherwise for switch values 2 and 3 you must also create a grouping (transaction BUC2) for these intervals. For the system to be able to connect the grouping and the number range interval, the name of the grouping must be exactly the same as the name of the corresponding number range interval (the name of the grouping is contained in the first column of the table). If you select 3 (HRALX/PNUMB = 3) for the number assignment of busienss partners of the employee role, create HRALX/PSUBG switch manually in table T77S0.
In table T77S0, HRALX/ONUMB is used to set the number assignment for organizational units and HRALX/PNUMB is used to set the number assignment for employees.
Create a number range ZZ
Transaction code BUC2. Create a grouping of the same ID as that of the number range. Eg. Number range ID : ZZ and grouping ID should also be ZZ
In table T77S0, maintain the following combinations
HRALX-PNUMB = 2
HRALX-PSUBG = ZZ
10. Make the following customizing changes in CRM
Transaction code SM30 : Table T77S0
Group Sem Abbr Value Abbr
HRALX HRAC X Activate HR Integration with CRM
HRALX OBPON ON Activate integration between Business partners and Org Units
HRALX PBPON ON Integration between business partners and employees
HRALX OPROL BUP004 Role definition for org unit Business partner
HRALX PPROL BUP003 Role definition for Employee Business partner
HRALX ONUMB 1 Number range assignment for org units
HRALX PNUMB 2 Number range assignment for Employees
HRALX PSUBG ZZ Number range grouping only if PNUMB is not 1.
11. Create Employee Master in R/3. Employee master consists of Infotypes. The mandatory infotypes are Actions, Address, Personal data and Organizational Assignment. You can ignore the remaining. Click on next and dont save the other infotypes.
Transaction code : PA30
12. In R/3 Initial Download : SE38 RHALEINI
Plan version : 01
Object type : P Person (always)
Object ID : Employee ID eg. 1
Receiver Partner no. : YYY
Select further details
You get all the data transfer details
13. In CRM, transaction code PP01 View HR Master objects
You see that the employee 1 has got transferred. To see the corresponding business partner go to the infotype Relationships (the first row)
Screen 2 gives you the business partner ID in CRM
Regards
Rekha Dadwal

Partner display for SERVICE TEAM in report /TMWFLOW/REP_REPORTING

Hi all I've the following question about report
/TMWFLOW/REP_REPORTING
For the Partner det. procedure which I'm using, I set 3 possible types of partner for function type 0016 (service Team)
and exactely Developer Tester and IT Operator.
When i'm calling the report /TMWFLOW/REP_REPORTING I've the following behaviour :
If for a document I've mantained olny Developer, this value is displayer
If I've mantained Developer and tester in my business transaction, the tester partner is displayed.
How can I display always the Developer, which is the most important value? (ok, better both, but I prefer the developer)
I'm working on Solution Manager 7.00
ST compoent rel 400, level 23
Thanks a lot,
Fabrizio Raffa

Hi Fabrizio,
You've mentioned that you are using ChaRM Reporting /TMWFLOW/REP_REPORTING.
Actually, for this topic, the "New ChaRM Reporting" /TMWFLOW/REPORTINGN was provided as an advanced tool to replace the old reporting tool. There are a lot of enhancements in this new functionality and we recommend you to adopt it and do not use the old reporting any longer.
Best Regards
Fernando

Multiple contact persons for Business Partner

Hi,
I'm searching for an extractor which can extract all contact persons beloging to a Business Partner. The customer would like to make a query on business partner and their contact persons related to a marketing campaign. Any suggestions?
Regards,
CB

Using the DTWQ to update the new additional contact person. No need to use add option. It is because you just only add the additional contact persons and no new BP
jimM

BP - Service Team

Hi,
I would like to know for which Service Team an Employee Business Partner belongs to
Is there any FM or table for getting this info
For example, a service technician can belongs to Service team A and B.
Generally in Resource Planning Tool, we can see the who are the employee BP's assigned to a Service team.
So I want to fetch those A & B by passing the BP and for which team he is mainly attached?
appreciate your help in this regard
Kris

Hi Krishna,
You can get the user position in org model using the FM RH_POSITIONS_OF_HOLDER_GET.
pass the parameter per_objid = user id.
loop the table holder_objec WHERE otype = 'S'. and this will give you the position A & B.
Hope this will help.
Thanks,
Vikash.

No Business Partner generated for new employee transfer from ECC to SRM

Hi All,
I am working on SRM 5.0 with ECC 6.0 backend. The HR structure is replicated from ECC using ALE, message type:HRMD_ABA.
When I am trying to replicate a new employee from ECC to SRM, I run the O-insert first, then the S-insert and then the P-insert using PFAL transaction.
The Org structure was already in place in SRM, so it just adds the new position to it by A003 relation. The S-insert generated idoc shows status as '53' in both ECC and SRT with the relation A003, B007 and A008. But, when I check the table HRP1001, the A008 entry is missing. Due to this, no CP is generated for this position and also no business partner is generated for this user.
When I run the P-insert for this employee, the idoc is posted in ECC. But, the status of the idoc in SRT is '52' and the message shown is "The Parameter Country Has Not been Entered During Naming Format Check" Message No. R11206.
I checked the Name Format for this employee, and it is maintained as 2.
Where am I going wrong? Why is no CP person generated even when the idoc status is 53? Why isn't the new employee getting transferred to SRM server?
I have checked the SAP notes related to HR-ECC Org transfer, but I am unable to figure out the reason for this problem.
Could anyone help me out in this?
Regards,
Ancy

Maintained the name format tables (SA13)on ECC and SRM side.

Business Partner in Service Desk can only be selected via F4

Please help me find the error. It seems that everything has been configured ok, but if you type in the BP number directly in the field "processor", there is the error message "business partner 201 can not be the message processor". If you select the same bp number via F4, there is no error message. What's wrong?
BP has been defined as employee.

Hi,
Use BP_GEN transaction code then go to userlist->Add system select solman system which shows all users in that then select the user by double click then goto Edit->create business parterner. This will create user as BP user automatically with required values. Hope this helps to avoid error. I have tested but working fine when I enter BP number and press enter.
Thanks,
Ajay.

Business Partner with ID GUID is not an employee - HR Replication

Hi All,
We are on SRM 5.0 Server 5.5. Our SRM Org structure comes from R/3. We did an initial replication and everything worked. I am now manually trying to replicate selected positions and persons, and this is not working properly.
The position and person comes across however in PPOSA_BBP the central person is not automatically linked to the position. When I run HRALXSYNC on the CP, I get an error "Business Partner with ID <GUID> is not an employee". I have checked the BP and it is an employee; in transaction PP01 there is an Org. assignment (0001) to the position and org unit. I have checked the IDOCs and the relationship A008 seems to be coming across.
Does anyone have any suggestions as to what else I can check?
Thanks,
Paula.

Hi
Please go through this ->
The CP object is a technical object and represents the natural person. The CP is not transferred in the scenario "SRM standalone with ALE integration of an HR system". This means that the CP in the HR system and the CP in SRM systems are different objects. The number of the CPs in the SRM system in this case is not significant, but when the CP is created, the system tries to assign the number of the first personal number (contract) to the object.
See related SAP OSS Notes, which will definitely help ->
Note 920185 - SRM 5.0: No CP<->BP consistence check in BBP_BP_OM_INTEGRATE
Note 763403 Assign existing (SU01) users to (ext.) employees
Note 875015 No attributes found for service agent
Note 309909 - R/3 HR connection: Link user / position
Note 1046808 - Business partner validation
Note 934372 - SRM/CRM: HR integration for business partner - new features
Also see this ->
During the business partner replication from purchasing systems to SUS, the following error occurs in an XI interface: "An exception has occured. E:R11: 124 - Business partner with GUID &1 does not exist"
Note 726212 - SRM40-SUS: Business partner - correction for SP00
Related Notes
Note 922181 - SRM-SUS: Mail notification not send from 'BBP_SUS_BP_ADM'
Note 849217 - SUS-MM: Vendor replication leads to error
Do let me know.
Regards
- Atul

Enterprise Service for Business Partner on ERP

Hello,
I'm searching for an Enterprise Service for the generic business partner which was introduced in ERP. The application Real Estate Management works with this BP and I can't find a service for that.
I know that there are ES for the objects Employee, Supplier and Customer, but on ERP is as well the object business partner.
Hopefully someone can support me.
Best regards,
Yves

Got a reply. The ES for the business object: Business Partner will come with EhP4.
Cheers,
Yves

A business partner creates a new employee

Hi there.
In transaction u201CBBPMAINEXTu201D (Process user data), a business partner can create a new employee, example a bidder employee.
When he populates and send request, the system shows us next message: u201CYour registration application was received and will be forwarded to the processor responsibleu201D
I have some question?
¿Is it sent an email to any one?¿Is there any WF in order to approve the creation?¿Is there any transaction in order to supervise the new employee?
I suppose that there is any way in order to inform the system administration or the buyer. Is it necessary any role in order to receive the email or the WF.
Thanks in advance.
Raúl.

Hi,
Approval of external user master records (WS10000209)
Approval of external business partner registration
(vendor, bidder) and their contact persons.
The approver must be entered as a possible agent in the agent
assignment of the standard task TS10008109.
If the external business partner and employee have not yet been registered, external
employees can register the company as a vendor, bidder, or portal bidder and register themselves as
the contact person of that company. When the registration application is saved, the approver
responsible (a professional purchaser or system administrator) receives a work item in the Enterprise
Buyer system. Using the work item, approvers reach the application Managing External Business
Partners, where they can adopt and complete the relevant data from the registration application.
Approvers must inform the applicant of the approval or rejection of their registration application and
of the relevant logon data for the Enterprise Buyer system. This can be done via e-mail using the
application Managing External Business Partners, if necessary. Prerequisites: You must have
defined the responsible processor. To do this, enter the processor as a possible agent in the agent
assignment of the standard task TS10008109
Could be helpful..
Thanks
prasad.s

Error in creation of Employee for Business Partner

I am using SRM 4.0 and ECC 5.0. I have created Vendor Root Org EBP and replicated vendors from R/3 which is appearing in Vendor Organization in EBP.
Now when I am trying to create Employee as contact person in thru WEB transaction in EBP "Manage Business Partner".
After filling all mandatory info when I am saving the same and error popup is coming as given below:
"Central system not reached"
Can some body help analyze the same?
Thanks
Sanjay

Hi Vadim,
Following attributes are already maintained for Vendor Root in Org Plan :-
BUK
BWA
CUR
ITS_DEST
SYS
VENDOR_ACS
VENDOR_SYS
Beside this I have checked up availability of replicated vendors in VENMAP table with GUID.
First error message is coming:
"Central system not reached"
When I am defining Logical system and external business partner ID that is R/3 Supplier code than another error is coming :
"BP role BUOP001 already exists for partner XXX"
This XXX is running sr. no. of BP number range but do not appear in BP data base . And in next attempt next Sr. no. is blocked by system.
Problem is still persisting pls. suggest.
Sanjay

Error while consuming "Find Business Partner Elements by Elements" service

Hi,
I am consuming the standard enterprise service "Find Business Partner Elements by Elements" with technical name "BusinessPartnerCRMElementsByElementsQueryResponse_In" in Webdynpro CE 7.1 . The service provider is CRM 7.0.
The response from the enterprise service contains a structure called categorycode as ,
<CategoryCode/>
This seems to throw an error in when we execute the application . The error we receive is
1. "Check nested exception for details. (Parameter set failure. The runtime was not able to set some result parameter value."
2. Caused by: com.sap.dictionary.runtime.DdCheckException: Value is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287)
The details of the exceptions are as follows
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Parameter set failure. The runtime was not able to set some result parameter value. See nested exception for details.) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeResponse(SOAPTransportBinding.java:1621) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.readSOAPResponseMessage(SOAPTransportBinding.java:278) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1120) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:779) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:746) at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73) ... 78 more Caused by: com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Parameter set failure. The runtime was not able to set some result parameter value. See nested exception for details. at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeParameter(SOAPTransportBinding.java:1941) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeResponse(SOAPTransportBinding.java:1544) ... 84 more Caused by: com.sap.tc.cm.base.exception.BaseModelRuntimeException: Attribute value is not valid for attribute 'CategoryCode' of model class 'com.sap.demo.bpsearchwd.model1.BPCRMElmntRspBP' at com.sap.tc.cm.base.model.BaseGenericModelClass.setAttributeValue(BaseGenericModelClass.java:327) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClass.setAttributeForName(WSGenericModelClass.java:187) at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClass._setField(WSGenericModelClass.java:65) at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClass._setField(WSTypedModelClass.java:141) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readElement(InstanceBuilder.java:642) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readSequence(InstanceBuilder.java:1060) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readContent(InstanceBuilder.java:1208) at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.deserialize(GeneratedComplexType.java:1318) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readElement(InstanceBuilder.java:573) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readSequence(InstanceBuilder.java:1060) at com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder.readContent(InstanceBuilder.java:1208) at com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType.deserialize(GeneratedComplexType.java:1318) at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.deserializeParameter(SOAPTransportBinding.java:1920) ... 85 more Caused by: com.sap.dictionary.runtime.DdCheckException: Value is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287) at com.sap.tc.cm.base.model.BaseGenericModelClass.setAttributeValue(BaseGenericModelClass.java:324) ... 97 more
Has anyone encountered this problems .? Any ideas on how to fix this would be very helpful.
Thanks and Regards
Bharathwaj

Hi,
Caused by: com.sap.dictionary.runtime.DdCheckException: Value is not valid; enter a value that consists of exactly 1 characters at com.sap.dictionary.runtime.DdTypeString.checkValid(DdTypeString.java:287)
1 Person The business partner is a natural person.
2 Organization The business partner is an organization.
3 Group The business partner is a group of natural persons or organizations.
Are you setting any values to this?
Regards
Ayyapparaj

Employee business partner ID showing up in "Service Team" column of query

Similar Messages

Maybe you are looking for