Error whie postring in to accounting document

Hi,
I am getting the following errors while posting billing documents in to Accounting .
Tax Jurisdiction 0 has incorrect length
Tax Stmt item missing for tax code O0
Tax Stmt item missing for tax code O1

Hi Raja,
Please note that the SD-FI interface changed from earlier releases.
In the vast majority of cases, error FF805 occurs because of an error
in your pricing procedure. The previously attached note 112609 explains
in detail how tax codes are transfered to conditions.
The note 400766 explains the checks performed by the system on the Tax
codes:
1. system checks whether there is a revenue line for each tax line.
2. in the reverse case, for each revenue line containing a certain
   tax indicator there must be a tax line with this indicator.
If the tax condition has condition value zero and condition base
value zero, then it is not transferred to FI.
If you have revenue lines containing a tax indicator XX, but no
tax line with tax indicator XX, then the error FF805 issues, and
it is justified. => Please check these informations. I have attached
notes for further information.
-> EXAMPLE
   If tax condition MWST has base amount zero and value zero; for this
   reason it is not passed to accounting. But, according to the
   criteria reported by note 112609, its tax indicator EG: A7
   has been assigned to the condition EG: ZBR1.
   So in accounting there would be a revenue line with tax indicator A7,
   but there isn't any tax line with indicator A7 (because MWST doesn't
   pass to FI). The note 400766 states situation is unallowed, and error
   FF805 is justified.
For FF791,please check the customizing of OBCO,  whether company is relevant for tax jurisdiction.
If yes, then it is necessary to determine a tax jurisdiction code.
In the standard system, normally the tax jurisdiction code is determined
from ship-to party. If in your case  it is an export to another
country,the ship-to party has not a valid Brazilian tax jurisdiction
code. Then the system searchfor the default tax jurisdiction code
in transaction OBCL.
If it is missing, then error FF799 is given.
Thanks and best regards,
Smile

Similar Messages

  • Error when releasing billing to accounting document

    Why we tried to release the billing to accounting document. There is the below error.
    Could someone please kindly help?
    Message Identification: F5
    System Message Number: 358
    Output type: E
    The Diagnosis is 'This document refers to a document which contains an invoice reference.
    The Procedure is 'Enter a different document as the invoice reference'.
    Thanks,

    You might be creating the billing document for a flow where there might be original invoice and/or credit memo also.
    So check that the original invoice and/or credit memo has an invoice reference to itself (i.e. the invoice reference = the accounting document number) than there is an incorrect referencing.
    Remove this reference via FB02 in the original invoice and/or credit memo and it should work
    Regards,
    Gaurav

  • Pricing error (Message no. VF073) Accounting Document not generated

    Dear All,
    User has entered delivery quantity as 0.00 in one of the line item (007) without material description in vl01n and saved. Invoice number has also been generated. Because of Pricing error for the line item( 007) Accounting Document is not getting generated.
    My issue is without cancellation of invoice/configuration changes, can i delete the line item (007) or is there any alternative solution to create accounting document.
    Note: line item( 007) does not have details only quantity is mention 0.00 in VL01n.
    Experts please help me how to solve this issue.

    hi
    please check the account assignment group for material, go to vf02 and check line item ,  , click on menu bar  environment -account assignment analysis-revenue accounts  , here you will check you base condition type data , once click on condition type , system which data is missing , now you can enter ,

  • Error in Posting Excise Invoice - Accounting document not generated !

    Hi,
    We have done the GR using MIGO-Only Part I, captured in the Excise Invoice using J1IEX and these two transactions are OK.
    While we are trying to post the Excise Invoice, the system is displaying the following error:
    Accounting document not generated!
    Message no. 4F186
    Please guide.
    Please note that we are running the transaction in the Pre-production server for the very first time.
    Also would like to know what all reports I should run related with Excise. Someone told me that I should run the T Code J1I5 & J2I5 to update the RG23 register the next day of the transaction the entry related with excise is not updated on the same day. I think the updation of register should be automatic 
    Regards,

    Hi,
    I am repeating my Process/Question:
    We have Created a Purchase Order with Tax Code (JMOP) related with Excise (Cenvatable).
    We did the Goods Receipt (MIGO-> Only Part 1)
    We did the Capture Invoice (J1IEX).
    Till here every thing is OK.
    While Posting the Excise Invoice (J1IEX), the system is giving the follwoing error:
    Accounting document not generated!
    Message no. 4F186
    On Simulation window, the System is displaying the following CENVAT Posting:
    24820020           Dr.      1,058.00
    24820000           Dr.      105,840.00
    24820010           Dr.      2,117.00
    13113920           Dr.     109,015.00
    But when we click on the Post CENVAT Button, the system is displaying the message "Accounting document not generated !" and exits.
    Please guide.
    Please note that we are running this Transaction on the Pre-production Server; On the Development Server it is working fine.
    Regards,

  • Error while reversing the asset accounting document through t code AB08

    Hello All,
    i have one query where the user has scrapped the assets through T code ABAVN in the month Dec 2009 with doc date of Nov 30th 2009. Now he realised that the posting was wrong and he wants to reverse it in 1st of Jan 2010 with the t code AB08. when we click on the reverse button in t code AB08, system is by defaultly taking the fiscal year, posting date and period, only we need to give the reason code. here user is trying to give the reversal date manually and making the posting. Now system is giving an error "Reversal in different fiscal year is not possible" with the message AA487.
    we are using SAP ECC 5.0 and i got SAP 1393737 for this and it is mention that there is a program error and needs to implement the program corrections.
    Please can any one suggest me, is that correct approach or should i need to follow the another work around to resolve this issue.
    Thanks in advance.
    Regards,
    Venkat

    Reversal in different fiscal year is not possible in the Standard        
    system since it will affect your balance sheet and other accounting      
    legal report.                                                                               
    It is not possible in FI-AA to reverse       
    a document in this way,  "because of the calculation of depreciation"                                                                               
    The reasons are:                                                                               
    1. The reconciliation of FI and FI-AA must be ensured, and therefore     
       Posting and Asset Value Date must be in the same fiscal year.                                                                               
    2. Depreciation of aquisitions posted in the previous year, are          
      not automatically corrected, when you post a reversal.                                                                               
    One way is to open the previous period(previous fiscal year) and post    
    the reversal to the same fiscal year. PLEASE NOTE THIS IS ONLY IF YOU    
    HAVE NOT EXECUTED YEAR END CLOSING TRANSACTIONS.     
    Blaz

  • Error when Parking G/L Account Document for Ledger Group

    Dear Frds,
    When my client try to park document for General ledger group (T-Code: FV50L), he is getting the error like CHECK_PLANTS_ABRO with the message No # FF804.
    Can anybody guide me what is this regard..
    Regards,
    Laxma

    Do one this items:
    1. Refer Note. 904036
    2. Check your configuration in terms of plants, company code, company name. Something might have been missing.

  • An accounting document is not required for this billing document

    Hi,
    While releasing the billing document to accounting the error is coming like "An accounting document is not required for this billing document"
    Diagnosis:
    The billing document has the net value '0' and does not create an accounting document. Despite this, the posting status 'C' (Posting document has been created) is set internally for this billing document.
    But the net value is coming in the sales order and alsi into the Billing document.
    gurus plz help me.
    regards,
    ragesh.

    Goto VOFA screen and check for ur billing type , what is assigned in the document type field?.
    Also please check, the posting block is activated. if it is, please remove.
    Also goto the accounting document type settings at OBA7, check whether the customer field is ticked under the account type allowed tab.
    Please let me know, whether ur problem solved..
    Reward points if useful..

  • IR created for Purchase order without accounting document

    Hi all,
    We have a peculiar situation where an IR (Invoice receipt) document has been created for a purchase order where the corresponding accounting document has not been generated. Can you please let us know how can we create accounting document for this IR.
    We tried to reverse this IR by transaction code MR8M but it is throwing the error message "Reversal not possible, accounting document for the ref. does not exist".
    We understand that there is some standard SAP utility which posts the accounting document and in case there is some configuration also for this, please let us know.
    We would be grateful for any information on resolving this issue.
    Regards,
    Santosh

    Hi,
    Please refer to the below links:-
    http://www.sap-img.com/financial/integration-of-fico-with-other-modules.htm
    http://www.sap-img.com/materials/what-is-the-dataflow-of-mm.htm
    Re: FI-MM(Valuation Class)
    Rgds.

  • Twice Accounting Document genrated for single Invoice

    Hi,
    I have the simple  scenario SO-Billing - Accounting
    In 1 sales cycle process system genarated 2 accounting document for single invoice.
    Test Case
    Business partner     20131607             RUDRA DISTRIBUTORS
    Document                                                        Date          Overall processing status
    E VOUCHER ORDER 9289367                       07.02.09     Being processed
    E VCHR Comm.Inv. 901539710                     07.02.09     Completed
    Accounting document 3801044102              07.02.09     Cleared
    Accounting document 3801044132              07.02.09     Cleared
    Can any body explain how it happen or what is causes for the same?
    Best will be rewared with points
    Thanx

    Hello,
    Please let us know which SAP system version you are currently working on. This is purely a system error. Please cancel the accounting document generated as well as the billing document. Then try to recreate the billing document once again. Hope this would resolve your issue.
    Regards,
    Sarthak

  • Error while creating a billing (no accounting document gnerated)

    hi gurus,
    while saving a billing document in vf01 error pops up no accounting document generated and when i go to account determination analysis in billing  tax condition is missing
    kindly help me out
    thanks

    hi
    then goto VF02 and from the menu Environment--Account determination analysis-revenue acccounts
    find here whether any assignment is missing
    check u r VKOA settings whether the g/l ACCOUNT HAS  assigned or not for that tax condition type
    regards

  • Accounting Document not posted for Cancelled Invoice -error in FI interface

    Hi,
    When I create a billing document then an accounting document gets created automatically in the background and then when I cancel the billing document no accounting document gets generated and the field Posting Status in header Detail of Billing document updated as "Errors in Financials Interface.
    I tried to release it for Posting via VFX3 but failed due to below error message in Log:
    "Incorrect doc.no.: 4900000005. Select document number between 3000000000 and 3099999999"
    I have checked the Number range assignments to the Invoice type and Accounting type.
    The number range is same for both Invoice type (Y0F2) and Cancelled Invoice type (Y0S1).
    The Accounting document type (RV) is also same for both the cases. But it is working fine for Y0F2 (Acounting document generated and cleared automatically). But not working fine for Cancelled Invoice (Y0S1).
    Can anybody please help me find out a solution to the issue.
    Thanks, Ram.

    Hi,
    The error message F5151 refers to the number range of the FI document.
    Please have a look at the note 1259505: FAQ: New cancellation procedure in SD, which covers this issue in detail.
    Question 5:
    Q5. What is the FI document type, generated by the cancellation ?
    In the old cancellation procedure, the FI document type is always
    determined in SD, and passed to FI (the same when a normal invoice  -
    not a cancellation -  is transferred to accounting).
    In transaction VOFA there is the field 'Document type' (TVFK-BLART).
    If this field is filled, then the FI document will have the document
    type maintained here.
    If TVFK-BLART is empty, then the FI document will get the default
    document type 'RV'.
    If the new cancellation procedure is performed, the FI document type is
    always determined in FI, based on the document type of the FI document
    to be reversed.
    In transaction OBA7 the FI document type has assigned the field 'Reverse
    document type' (T003-STBLA).
    If it is filled, then the FI cancellation document will get the document
    type maintained here.
    If T003-STBLA is empty, then the FI document cancellation will get the
    same document type as the cancelled FI document.
    Notice that an unexpected FI document type can cause the error message
    F5 151.
    Example:
    F2 invoice 90000001 was released, creating an accounting document with
    document type 'RV'.
    This F2 invoice is reversed by the S1 billing document 70000001.
    In customizing of SD there is:
    Billing Type    Document Type
    F2              RV
    S1
    In customizing of FI there is:
    Document Type    Number range   Reverse Document Type
    RV               00             AB
    AB               01             AB
    The FI number ranges (object RF_BELEG) are:
    No  From number    To number   Ext
    00  0090000000     0099999999  X
    01  0100000000     0199999999
    Different situations can occur, due to these customizing settings of the
    FI document type, caused by the type of cancellation.
    If the new cancellation is used:
    The FI document type 'RV' has 'Reverse Document Type' = 'AB'.
    Document type 'AB' has number range '01' set as internal.
    So the FI document will have its own number included in
    100000000-199999999.
    There is no issue.
    If the old cancellation is used:
    The cancellation billing type S1 has no 'Document type' maintained, so
    the FI document will get document type 'RV'. It has number range '00',
    set as external number range.
    So the FI document should get the same number of S1 billing document.
    But the S1 billing document has number 70000001, not included in the
    interval of number range '01'.
    This will cause error F5 151.
    I hope this information helps you.

  • Accounting Document Number range error

    Dear All,
    As per my client requirement 3 types of billing document is thier. SD Consulant maintain the number range below
    1. Domestic billing (Number range between 000040000- 0000401000 )
    2. Export billing (Number range between  0000900001-0000901000 )
    3. Cash sales billing (Number range between  0000900001-0000901000 )
    In VF01 billing is saved for above billing documents. But not posted into Accounting Documents.
    I am gettin error " Incorrect Doc Number 40000 select the document number between 9000001-901000"
    In my understanding FI Consulant maintain the same number range the Account Document automatically posted in to Accounting. How to maintian the 3 number range in FBN1.Plz help me.
    Thanks and regards
    chandra

    Hi,
    In FBN1  FI Consultant maintain the number range Cash sales billing (Number range between 0000900001-0000901000 . This Cash sales billing posted to account, other billings not posted to accountg. plz guide me.
    Thanks and regards
    chandra

  • Error in Posting Accounting Document from invoice

    Hi,
    When i create invoice, the system gives error while creating accounting document as,
    "Tax code Y1 does not appear in any G/L account item".
    In my pricing procedure. i have two tax condition types. MWST and ZSED (copy of mwst). when i delete ZSED from my pricing procedure and then i create a sales order/delivery & finally invoice...then it works fine (Accuonting document is created successfully).
    i have assigned the gl accounts in vkoa. and MWST & ZSED goes to same gl account via MWS accounting key.
    although i have searched the forum for this issue, but that didnt resolved my issue.
    seeking your guidance.

    Dear Robert,
    I'm having same issue as yours.
    The requirement for us is if return sales in some order reason codes, then tax should be posted to different G/L other than the G/L defined in OB40(transaction MWS).
    After several test, found the system only recognize the G/L in OB40, won't touch setting in VKOA. As if I delete the GL in table T030R, SAP will issue an error requesting GL assignment.
    Please let me know if you have solved your issue! If yes, please share your solution! 
    Thanks in advance!

  • VF02 error in Release Billing document to Accounting document

    Hello SAP Folks,
    A sales order (VA01) and corresponding billing document has been posted (in VF01). When I try to release the billing document to Accounting, an error "Incorrect document no. XXXXXXXX.  Select the document number between yyyyyyyyy and zzzzzzzzzzzzzz " shows up. When I tried to find error through VFX3, it says, Release incomplete due to "FI/CO interface" Can anyone suggest the missing configuration.
    PS:  I checked the doc. type RV (Billing doc. transfer) and Billing type F2. They are in different number ranges. and RV is marked external. The number range settings are similar as that of another Company code (where we are able to release billing document to accounting document).
    Thanks in advance,
    Narayanan

    Hi,
    Thanks for your suggestions. The issue is resolved by changing the number range for RV document type (though it is still external). I guess this is made external since the Billing document number is passed to FI document number when it is released to Accounting documet.
    After the release, both Invoice and Accounting document have the same no.

  • Error creating accounting document for a credit note

    Hi All,
    I am facing an issue while creating an accounting document for the credit note created.
    The scenario is as follows:
    Created a credit memo --> created credit note --> create accounting document
    While creating accounting document, i'm getting an error message as 'The G/L account XXXXXXXX requires an assignement to CO object'.
    Please let me know why i'm getting this error and how to overcome this issue.
    Thanks,
    Anil Kumar

    While creating accounting document,
      i'm getting an error message
    First of all, I am not clear on your above statement as in normal circumstances, once you generate a credit memo, in bacground an accounting document will also be generated.
    In your case, I believe while saving the credit memo, system throws the error to maintain CO object in which case, do the following:-
    Go to TCode KA02 enter the controlling area, give the G/L acoount No and click on Master data tab.  There  select  "Default Acc Assgmnt" tab  and enter Cost centr and save.
    Next Go to FS00, input the G/L Account and click on Edit Cost Element on top.  There click on Basic Data and for the field CElem category, maintain the required numeric value.  Now select the tab Default Acct Assgnmt and there maintain the required cost center and save.
    thanks
    G. Lakshmipathi

Maybe you are looking for