Filtration BP date in outbound queue.

Hi experts!
I have a question. I need to stop data refering to BP in outbound queues. Information about content outbound queue, i receive from FM 'TRFC_QOUT_GET_CURRENT_QUEUES'. Now i must to stop data BP (not copy to ERP system).
Can anybody tells me, how i must do it?
Thanks.
Regards Kostya Khveshchenik
Edited by: Kostya Khveshchenik on Dec 26, 2008 12:13 PM

Hi,
Pls. mark the thead as closed if it's resolved.. if possible share the solution too..
Cheers,
Sumit Mittal

Similar Messages

Outbound queue won't fetch data to inbound queue after DS enhancement

I enhanced the 2LIS_02_ITM extractor with a field from EKKN table, in CMOD filled this field. Transported all this to TEST and then to PROD systems. In DEV system everything is OK, but in TEST and PROD system my outbound delta queues are filling and not fetching the data to the inbound queues!!! When i launch the job in LBWE, it cancels itself. And when i see short dumps, it says something about modified structure. Any idea how can i fetch the data from one queue to another?

Hi,
First you have to make sure that there are no enrteis in LBWQ,delta queue and det up table before you do the transports.
So anyway the process has to be repeated again.
So once the transports are done then you will have to do the whole set up again.
Do the follwing after transports.
1)Delete the set up tables
2)Do init w/o data transfer from the infopackage.
3)Fill the set up tables( You can schedule a job in the background to fill the whole 7000000 records at the same time)
4) Full repair loads to BW( Either you can do it in parts...like scheduling different loads at the same time through different infopackages for different selections OR one infopackage for the whole data).
The better is to do in parts as in case of whole data load fails then you will lose the whole data and you will have to repeat the process again.
You can schedule the set up table fill job as well as full repair infopackage schedule at the same time for different selections.
Suppose if set up table is filled with selection A and once job finished then schedule the infopackage with selection A meanwhile you can fill the set up table with selection B and so no.
This way you can make sure the jobs are not failing because of huge amount of data load at the same time the time taken to complete the process is less.
As such there is no limitation on amount of data..its the duration of process which is limitation...for very long running process chances are that you run out of background process or you miss some IDOC's.
Thanks
Ajeet
Edited by: Ajeet Singh on Nov 18, 2008 9:26 PM

Need to know how to check the outbound queue in SAP for data flow into CRM

Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.

Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
<b>Reward points if it helps.</b>
Regards,
Amit Mishra

District data missing in the Outbound Queue of CRM

Hi,
We have an issue with the information not flowing to the Outbound Queue of CRM.
For eg . When we change the District information for a BP and synchroniye the system, the information is flowing in the Inbound queue to the CRM system and we are able to find the District data in the Bdoc. But when we check the Bdoc in the Outbound queue of CRM for this site, this District information is missing over there.
Any pointers on this would be of great help.
Regards,
Rasmi.

Hi Rashmi
Which BDoc did you check - the MBDoc or the SBDoc?
I guess the first thing to do would be to see if the information is correctly updated in the CDB.
If the district is missing in the CDB entry then the problem is with the synchronisation between BUT000 and SMOKNA1
You may have already checked this but I just thought I would ask
James

CRM 5.0 outbound queues to Mobile sales

Hi all,
We have upgraded from CRM 3.0 to CRM 5.0.
I am looking at the outbound queues in SMQ1 that are bound to Mobile sales Sites and am not finding any data bundles other than the name of the Replication Object name in the LUW's of these queues.
But in CRM 3.0 I am able to see detailed data bundles for any of the queues.
Does this mean no data is actually being passed from CRM to Mobile Sales.
At this point of time I dont have my commstation up and running to verify this. So I am curious to know how else can I check this?
Thanks.

Hi KP,
This is the default behaviour in 5.0...the queues are fine and you can go ahead with the sync using Conntrans.
Regards,
Ankan

Gerneric Datasources and Outbound Queue

Dear Experts,
I've got some generic Datasources (Delta and Full Update) that work properly with productive BW-System.
Now I'm starting to build up an developement system (wrong order I know) and want to load data using the mentioned Datasources from time to time to get relevant data for testing.
Problem now is, that the generic delta Datasources fail accourding to doublicate keys (loading to dev-system) although in the basic tables for these datasources no doublicate keys are existing (or even are possible due to the table key).
I realized in smq1, that every time when data is transfered to productive BW-System, the counter to the queue for dev-System is incremented. When I delete all the entries in smq1 all the updates for dev-System work fine.
In one of the threads here I read, that generic Datasources do not have outbound queues. (Re: Generic Data Source issue).
So is there any way to turn of the outbound queues for specific (generic) Datasources? I do not want to turn them of in general as we use standard delta Datasources for Controlling.
Or how is the "normal" way to transfer data to a dev-System?
(One more information: productive system is 3.5; dev-system is 7.1.)
Thank you in advance
Kind regards
Philip
Edited by: Philip Munz on Nov 17, 2009 8:50 AM

ok,
after some days of searching and reading I now understand my problem.
For all, who face the same problems in understanding delta-updates, qrfc, rsa7 and so on, please have a look at
http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3417800)ID0216771750DB11245246034303112354End?rid=/library/uuid/40427814-376a-2c10-5589-bc1aaa6692c3&overridelayout=true
again thanks for the help
kind regards
Philip

Deleting an outbound queue SMQ1

HI,
Can you please verify, is it ok to delete an outbound queue in smq1? The situation is, we have tried a delta load but we already aborted it since it is not needed anymore. But when we check on smq1, the queue is still there and it's status is running (transaction executing). What will happen if that queue will be deleted? will it cause data lost? Please help. Thanks!
Kind regards,
Mike

Hello Mike,
This shouldn't be a problem. And there won't be any data loss. however you might see additional table entries in your CRM or ECC(depending on what was the destination) for the LUWs that were already processed in your delta load.
Apart from that , no issues

Significance of Inboun and Outbound queue in sales order replication

Hi CRM Leads,
What is the significance of Inbound Queue and Outbound queue in saleas order replication from CRM to ECC.
What exactly happens in Outbound Queue and Inbound Queue.
Thanks,
Sandeep
What

Inbound - Tcode: SMQ2 : Inbound in the context of CRM and this queue shows the business transaction, master data and configuration data that are coming from ECC into CRM .
Naming Convention for Queues
The names of queues for data transfers from an ERP back end to the CRM server are made up as follows:
R3A (from ERP back end to CRM)
    I for the initial data transfer / for Data Synchronization
    D for the delta data transfer
    U for loading to the ERP back end
    R for Defining Requests
    <Object> Name or part of object name, or the name of the higher-level independent object
    <Key> Only delta queues are subdivided by keys
Outbound - Tcode SMQ1 - Outbound in the context of CRM and this queue shows the transactions and data that are going from CRM to ECC
See more on [Using CRM Queues|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2d9d9707361903e10000000a42189c/content.htm] following the link.
Read the [CRM Adapter Framework|http://help.sap.com/saphelp_crm70/helpdata/EN/49/2e33a2a6c51d24e10000000a421937/content.htm] for advanced learning.

Urgent help- How to open Outbound queues

Hi,
I am new to SCM-APO, we have SCM 5.0 having CIF to R/3 4.7 Enterprise.
In SMQ1 i can see lot of outbound queues present with status NOSEND in R/3.
I want to push these queue manually how shoild i do it
Please guide me as i m new to this area.
Thanks
Amit

Hi Amit,
Go to Transaction /n/sapapo/ccr i.e.CIF Comparision/Reconcillation of Transaction Data. then Click on
Execute Comparision/Reconcillation Tab. Then Enter Parter System i.e ECC,then Proudct & Location.then Select Document to be checked like Production Order i.e Mfg Ordrs(with Reqs/Receipt , with Opernations),Planned Order,Purchase order etc. which you want to Transfer in ECC concern to the Product.Then Execute the Transaction.
You will find Transaction data & result Documnet.Open the Transaction Data i.e Mfg Orders or Planned Orders.Then double click on Requirements/Receipts or Operations.You will find the objects in right hand side.Select all the objects & push in to R/3 with Push button R/3.
Hope so it will help you to solve your problem.
Regards
Sujay

Detected Blocked Outbound Queues

Hi All,
We have found detected Blocked Outbound Queues in SMq1 CRM PROD System and we have checked log , its shows below log.
400 R3AUBUPA0008063715       RP1CLNT400                               4 CPICERR A3A4176F143C4F3031E8C711 06.02.2012 20:02:48
400 R3AUBUPA0008063722       RP1CLNT400                               4 CPICERR A3A4177004E04F3031E9148F 06.02.2012 20:02:49
400 R3AUBUPA0008063751       RP1CLNT400                               4 CPICERR A3A4176F174C4F3031E9C4BB 06.02.2012 20:02:49
400 R3AUBUPA0008063753       RP1CLNT400                               2 CPICERR A3A4177002984F3031EA5DFE 06.02.2012 20:02:50
Status shows CPICERR ,Error when opening an RFC connection .
But i have checked RP1CLNT400 test connection is successful .
Kindly suggest .

Hello,
Check the following notes:
[378903 Queue status in SMQ1, SMQ2 and table ARFCRSTATE|http://service.sap.com/sap/support/notes/378903]
[430980 CRM Server: Analysis in delta data exchange R/3->CRM|http://service.sap.com/sap/support/notes/430980]
Regards,
Eduardo Rezende

Reg:Outbound Queues are strucked in CRM

Hi All,
After Extracting Data from CRM source system,the rercords are still displaying in the outbound queues of the CRM Source system.what might be the issue?In outbound queues the status is NOSEND or is it maintaining one more copy of the records.what happens manually if the queues are deleted.if any queues are deleted the posting to BI is stopped.If any data is missed by deleting the queues ,shall we recover the data back.what are the steps to schedule the those jobs in BI.
Thanks & Regards,
MD.Kalim.

Hello,
I would check the customizing in SPRO. It seems that your System is customized to distribute billing numbers.
My guess is
Customer Relationship Management
Billing
Country-Specific Functions
Official Document Numbering
Transfer Official Document Numbers to Accounting Documents
Check whether there is an entry somewhere there forcing the System to behave the way it does.
Lutz

Outbound Queue in ECC with CRM Destination

Dear experts
In ECC - t-code SMQ1, outbound queues R3AD_SALESDOxxxx in destination to the CRM system are in SYSFAIL.
I think those queues are created when an ECC user changes or creates a sales document in ECC. But we don't synchronise sales documents between ECC and CRM.
What are the settings to avoid this outbound queue to be created?
Thanks in advance,
Regards, Stephanie

Hello Stephanie.
Please remove the following table entry in your ECC system:
TBE31 (Application components by Publish & Subscribe interface)
- The following entries must exist for a successful data exchange:
                 Event            00501014
                 Obj.class        BUSPROCESSND
                 Fmodule          CRS_SALES_COLLECT_DATA
   Also see Note 490932.
Best regards,
Maggie

Outbound queue locked due to incorrect password

Hi Gurus,
I'm having a problem to activate an Integration Model as I'm getting an error stating that the outbound queue is blocked due to incorrect password.
I have set up the RFC destination of the SCM ECC logical systems wit a valid user (I tested it). I've changed between using a Dialog user and a Communications Data user. Between every change I made I've cleaned the queue using transaction CFQ1.
Do you have an I idea of what I might be missing?
Many thanks,
Diego

Diego,
It is unclear to me which system you are experiencing the problem on. Either way, the reasons are usually the same. I will address establishing the ECC>SCM link. Works the same way in the other direction.
Every time I have had the problem you are experiencing, I usually find that the fault lies with me, not the system - I have made assumptions that were not correct.
BD54 ensure that your logical system name is what you think it is. Unless you are rigorous in your naming conventions, it is easy to become confused between logical names/hostnames/system names for SCM and ECC, ,
NDV2 ensure that the SCM system is properly identified
SM59 Make sure your IP address, or hostname is right. Make sure the system you are logging onto interactively is the one being accessed in SM59. Make sure you have the right userid. Password is casesensitive on some versions of R/3 and APO, but not casesensitive on others. I always use UPPERCASE text only for PWs, at least until everything is totally debugged.
From a technical standpoint, your RFC userid can be interactive or system, I always start with interactive until the intefaces are totally debugged. You auditors may have an opinion the final settings in the production system in this area..
Rgds,
DB49
I hear and I forget. I see and I remember. I do and I understand.
Confucius

PI to ECC via ABAP Proxy - Outbound Queue for HTTP

Dear Experts,
Is there any Outbound Queue for HTTP?
I've a interface scenario where the receiver is SAP ECC and the receiver adapter XI ABAP proxy. As I see in the communication channel the transport protocol used is HTTP. So I think could there be an outbound queue to manage HTTP connection when PI send the data to SAP ECC?
Just like when we are sending IDocs to ECC via tRFC, we could check if the IDoc has really been sent to ECC by checking in tcode SM58 (Outbound tRFC).
In case for ABAP Proxy via HTTP, is there any similar connection to SM58 (IDoc via tRFC)?
Thank you,
Suwandi C.

Hi Kandasami,
Thank you for the reply. I will check for it.
Hi Jens,
Yes, I mean somewhere after the SXMB_MONI in PI and before SXMB_MONI in ECC, is there any queue in between those two?
Thank you,
Suwandi C.

STOP Status in Outbound Queue

Dear experts,
We have the following queues in our outbound SMQ1 in the ISU-CCS system.
Queue Name
MASS_CRM_CONNOBJ*
R3AD_CONNOBJ*
Destination
NONE
CMQ60TRUST
The queues are stucked when we try to perform initial download from CRM, to extract data from ISU. The further error message that we got in the outbound queue is:
Set by Host name: usahstxu; Transaction: ; Report: SAPMSSY1
Please help!! I'm desperate! This is really urgent Points will be rewarded!!
Edited by: homoSAPien on Jan 7, 2008 8:30 AM

oh well
there is another note too!
SAP note: 574774
well why we need to apply that note to CRM server need to be find out.. me also.. has the same question but never care to figured out... but now i ll do that..
this is my mail address : [email protected] if you found it.. please let me know if i found it then i ll mail you..
Regards
Naeem

Filtration BP date in outbound queue.

Similar Messages

Maybe you are looking for