Inventory service stops with status -1

Hello,
I have one server that causes me problems. It runs under NW 5.1 SP6 with
ZFD 3.2. It is installed as a Leaf server that should transmit its
collected data to the root server. We have several servers configured like
that and they all work. This one doesn't.
I verified the configuration of the policies, copied a working JAVA.CFG
version to the server, controlled the entries in the INVENV.NCF file but
found nothing to modify.
The only thing that remains seems to be a reinstallation of the JVM. But
before I try this, I'd like to ask if there may be another solution or if
the installation is the only thing that could help, what should I care for
the installation ?
Thanks for your replies
Nicolas

Tommyvoltage,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at http://support.novell.com in both the "free product support" and "paid product support" drop down boxes.
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

IDOC stops with status 30

We have migrated from SAP 4.7 to ECC6 , the Xi is on version 2.0 .
After migration some of our IDOC created from ABAP Proxy are not getting processed automatically. It stops with status 30 and we need to reporcess this . After reporocess the messages are getting processed
Can anyone help in finding out how to find this error
Edited by: Sanjeev Koganti on Aug 7, 2008 9:27 AM
Edited by: Sanjeev Koganti on Aug 7, 2008 9:39 AM
Edited by: Sanjeev Koganti on Aug 7, 2008 9:43 AM

Hi,
The status 30 of IDOC, status text u201EIDOC is ready for dispatching (ALE service)". Internally, the constant ALE_READY_FOR_DISPATCHING represents this status.
Processing Selected Intermediate Documents -->
Use program RSEOUT00 to start processing all selected intermediate documents.
You need to check your ALE settings for that error. test the proxy mannualy using payload.
Then you will come to know wheather your proxy works fine or not.
Go to SPROXY --> Select Your SERVICE INTERFACE --> clikc on TEST button or Press F8 --> provide your payload and check the result.
Regards,
Gunti

Can't print - gstoraster stopped with status 13

Title pretty much says it all. I have a Lexmark 2600 printer that won't work. This is what I got from the /var/log/cups/error_log:
D [05/Sep/2012:23:11:53 -0500] [Job 21] time-at-processing=1346904713
D [05/Sep/2012:23:11:53 -0500] [Job 21] job-sheets=none,none
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[0]="Lexmark_2600_Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[1]="21"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[2]="deusdies"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[3]="Untitled"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[4]="1"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[5]="media=Letter job-uuid=urn:uuid:98c3e101-39ae-318d-48e4-3cad7ab517a7 job-originating-host-name=localhost time-at-creation=1346904713 time-at-processing=1346904713 PageSize=Letter"
D [05/Sep/2012:23:11:53 -0500] [Job 21] argv[6]="/var/spool/cups/d00021-001"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[8]="HOME=/var/spool/cups/tmp"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[10]="SERVER_ADMIN=root@galaxy"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[11]="SOFTWARE=CUPS/1.6.1"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[13]="USER=root"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[14]="CUPS_MAX_MESSAGE=2047"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[17]="IPP_PORT=631"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[18]="CHARSET=utf-8"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[19]="LANG=en_US.UTF-8"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[20]="PPD=/etc/cups/ppd/Lexmark_2600_Series.ppd"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[21]="RIP_MAX_CACHE=128m"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[22]="CONTENT_TYPE=application/pdf"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[23]="DEVICE_URI=lxkusb://Lexmark/2600%20Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[24]="PRINTER_INFO=Lexmark 2600 Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[25]="PRINTER_LOCATION="
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[26]="PRINTER=Lexmark_2600_Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[27]="PRINTER_STATE_REASONS=none"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[28]="CUPS_FILETYPE=document"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[29]="FINAL_CONTENT_TYPE=printer/Lexmark_2600_Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[30]="AUTH_I****"
D [05/Sep/2012:23:11:53 -0500] [Job 21] Started filter /usr/lib/cups/filter/pdftopdf (PID 4033)
D [05/Sep/2012:23:11:53 -0500] [Job 21] Started filter /usr/lib/cups/filter/gstoraster (PID 4034)
D [05/Sep/2012:23:11:53 -0500] [Job 21] Started filter /usr/local/lexmark/lxk08/bin/printdriver (PID 4035)
D [05/Sep/2012:23:11:53 -0500] [Job 21] Started backend /usr/lib/cups/backend/lxkusb (PID 4036)
D [05/Sep/2012:23:11:53 -0500] [Job 21] STATE: +connecting-to-device
D [05/Sep/2012:23:11:53 -0500] [Job 21] PID 4035 (/usr/local/lexmark/lxk08/bin/printdriver) stopped with status 113 (Permission denied)
D [05/Sep/2012:23:11:53 -0500] [Job 21] Hint: Try setting the LogLevel to "debug" to find out more.
D [05/Sep/2012:23:11:53 -0500] [Job 21] Printer using device file "/dev/usb/lp1"...
D [05/Sep/2012:23:11:53 -0500] [Job 21] STATE: -connecting-to-device
D [05/Sep/2012:23:11:53 -0500] [Job 21] backendRunLoop(print_fd=0, device_fd=5, use_bc=1)
D [05/Sep/2012:23:11:53 -0500] [Job 21] PID 4036 (/usr/lib/cups/backend/lxkusb) exited with no errors.
D [05/Sep/2012:23:11:53 -0500] [Job 21] PPD uses qualifier 'Color.Plain.'
D [05/Sep/2012:23:11:53 -0500] [Job 21] PID 4033 (/usr/lib/cups/filter/pdftopdf) exited with no errors.
D [05/Sep/2012:23:11:53 -0500] [Job 21] Calling FindDeviceById(Lexmark_2600_Series)
D [05/Sep/2012:23:11:53 -0500] [Job 21] Failed to send: org.freedesktop.ColorManager.Failed:device id 'Lexmark_2600_Series' does not exists
D [05/Sep/2012:23:11:53 -0500] [Job 21] Failed to get profile filename!
D [05/Sep/2012:23:11:53 -0500] [Job 21] no profiles specified in PPD
D [05/Sep/2012:23:11:53 -0500] [Job 21] Ghostscript command line: /usr/bin/gs -dQUIET -dPARANOIDSAFER -dNOPAUSE -dBATCH -dNOINTERPOLATE -sDEVICE=cups -sstdout=%stderr -sOutputFile=%stdout -sOutputType=2 -r600x600 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dcupsMediaType=1 -dcupsBitsPerColor=8 -dcupsColorOrder=0 -dcupsColorSpace=1 -dcupsCompression=1 -dcupsRowStep=1 -scupsPageSizeName=Letter -I/usr/share/cups/fonts -c -f -_
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[2]="CUPS_DOCROOT=/usr/share/cups/doc"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[8]="HOME=/var/spool/cups/tmp"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[9]="PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[10]="SERVER_ADMIN=root@galaxy"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[11]="SOFTWARE=CUPS/1.6.1"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[13]="USER=root"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[14]="CUPS_MAX_MESSAGE=2047"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[17]="IPP_PORT=631"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[18]="CHARSET=utf-8"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[19]="LANG=en_US.UTF-8"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[20]="PPD=/etc/cups/ppd/Lexmark_2600_Series.ppd"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[21]="RIP_MAX_CACHE=128m"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[22]="CONTENT_TYPE=application/pdf"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[23]="DEVICE_URI=lxkusb://Lexmark/2600%20Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[24]="PRINTER_INFO=Lexmark 2600 Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[25]="PRINTER_LOCATION="
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[26]="PRINTER=Lexmark_2600_Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[27]="PRINTER_STATE_REASONS=none"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[28]="CUPS_FILETYPE=document"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[29]="FINAL_CONTENT_TYPE=printer/Lexmark_2600_Series"
D [05/Sep/2012:23:11:53 -0500] [Job 21] envp[30]="AUTH_INFO_REQUIRED=none"
D [05/Sep/2012:23:11:53 -0500] [Job 21] Start rendering...
D [05/Sep/2012:23:11:53 -0500] [Job 21] Processing page 1...
D [05/Sep/2012:23:11:53 -0500] [Job 21] PID 4034 (/usr/lib/cups/filter/gstoraster) stopped with status 13. ************************ is this important?
D [05/Sep/2012:23:11:53 -0500] [Job 21] Hint: Try setting the LogLevel to "debug" to find out more.
D [05/Sep/2012:23:11:53 -0500] [Job 21] End of messages
D [05/Sep/2012:23:11:53 -0500] [Job 21] printer-state=3(idle)
D [05/Sep/2012:23:11:53 -0500] [Job 21] printer-state-message="Processing page 1..."
D [05/Sep/2012:23:11:53 -0500] [Job 21] printer-state-reasons=none
I am using Cups 1.6.2, kernel 3.5.3, KDE 4.9 (if it makes any difference). I tried downloading the Lexmark drivers from the web, no joy. In fact, after being prompted to plug in the printer to the computer, the driver installation seems to freeze (it does not respond to me connecting the printer via USB).
I also tried adding through Cups web interface, same thing. The "state" says "stopped: filter failed".
Any help?

Bump?

BDOC stops with status ready

Hi
I am replicating campaigns from CRM to PS. Now as I release the campaign BDOC is triggered and goes to backend ECC system. But after replication BDOC comes and stops in inbound queue of CRM with status ready. When I goto SMQ2 and unlock it, it flows through.
This problem I am facing for all campaigns transfered not for any specific one.
Please help me in resolving this issue.
Thanx in advance.
Cheers
Hits

Hi,
This happens because the Queues are not registered.
In SMQ2, note the first 3 cahracters of the queue, e.g, R3A or CSA.
Now goto SMQR and see if any Queue exists with this name like R3A* or CSA*.
If it does, then select the Queue and press button Registration.
If it does not, tehn create a new entry by pressing the same registration button and entering the following value:
Queue name     CSA*
EXEMODE     D
MAXTIME                     60
USERDEST
NRETRY                     30
TDELAY                     300
Doing this is sufficient for your Queue to get executed automatically.
Kindly reward with points in case helpful.
Sharif.

JIMI 1.0 causes JVM to stop with status 129 under Linux

Hello,
I'm using JIMI 1.0 for manipulating JPEG-images in my web-application. Each time the servlet is performing this manipulation, the JVM stopps with status 129 (this is, what the bash is telling me) after a few seconds.
The image itself seems to be ok, cause the Browser is able to display the response of the servlet. The response itself is written into a ServletOutputStream.
Sending a JPEG without manipulation works well.
First the JVM was missing the symbol-font:
"Font specified in font.properties not found [--symbol-medium-r-normal--*-%d-*-*-p-*-adobe-fontspecific]"
I installed a symbol.ttf from the internet and thought, this will solve the problem - but not! Only this message didn't appear any longer, but the JVM still stopps.
Webserver-Configuration:
SUSELinux 9.2 Prof. = Linux(2.6.24-default)
JVM 1.3.1
tomcat 4.1.31
JIMI 1.0
RAM: 192 MB
I'm just started to work with Linux, so I'm not quite sure, that my System is well configured, cause with a Win98-system this problem didn't occur.
This issue prevents my project from starting and I really want to get over it!
Thank you in advance.

Thank your for the reply.
It seems to be just DNS, but I can't be sure - no time to test this on a production system. Pings to internet IP's work.
For instance, manually setting 8.8.8.8 DNS on a machine behind the NAT doesn't work, but ping 8.8.8.8 works fine.
Version seems to be one of the older mainline 12.4 releases.
***#sho ver
Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.4(3i), RELEASE
SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Wed 28-Nov-07 21:09 by stshen
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
I wonder if doing a no ip flow ingress on WAN interface has any adverse effects. Been testing it for a day, found none yet.
If it's just a weird bug of an old IOS release, I guess we'll never know

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

Process "cgpdftops" stopped unexpectedly with status 1

Suddenly my iMac G5 has stopped printing to my Kyocera-Mita FS1010 laser printer. The printer has done over 6,000 pages in this set-up.
The printer is set as USB to an Airport Express, the computer is an iMac G5 running Mac OS X (10.4.11).
The message in the print window is The process "cgpdftops" stopped unexpectedly with status 1.
the cups log is:
I [11/Nov/2008:16:41:57 +1100] Adding start banner page "none" to job 2000.
I [11/Nov/2008:16:41:57 +1100] Job 2000 queued on 'KyoceraFS1010' by 'ian'.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/cgpdftops (PID 1625) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/pstops (PID 1626) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started filter /usr/libexec/cups/filter/kyofilter (PID 1627) for job 2000.
I [11/Nov/2008:16:41:57 +1100] Started backend /usr/libexec/cups/backend/mdns (PID 1628) for job 2000.
E [11/Nov/2008:16:41:57 +1100] [Job 2000] Couldn't create CGPS Context. The likely problem is a permissions problem with the /tmp directory.
E [11/Nov/2008:16:41:57 +1100] PID 1625 stopped with status 1!
I [11/Nov/2008:16:41:57 +1100] Hint: Try setting the LogLevel to "debug" to find out more.
I ran disk utility to fix permissions, but the printing didn't work
I booted from the install disk and repaired the disks (no problems found)
I am now able to print using Adobe Reader, but not Microsoft Word or TextEdit (the only two I have tested)
Printing to my inkjet printer works fine for all applications.
I desperately need help as I have heaps of stuff to print for a meeting this Friday.
Thanks
Ian

I have completed all you suggested, including re-installing drivers. The result is the same.
The printer is physically attached to my Airport Extreme as a USB Printer.
I can print successfully to the printer from the iMac G5 when using Adobe Reader.
I cannot print using Word, Excel, TextEdit, Safari, Mail or Preview using iMac G5. Others not tested.
I can print from my MacBook to the printer for every application thus tested.
Thus there is nothing wrong with the Printer, nothing wrong with the Airport Extreme.
The problem lies within the iMac G5 and the software/server used by the G5 to print. Presumerably the Adobe Reader prints using its own software/server.
What else can I do?
Ian

Inventory Service won't load

We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
We recently applied the Zenworks 6.5 support pack 2 and since then we've
been unable to start the Inventory service.
When we type StartSer * at the console the error that comes back from the
logger screen is: java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
Service exited with status -1.
I've checked the database and it appears to load correctly. The database
runs on the same server as the Inventory service.
I've checked the Status in the inventory service object and the last status
is a 602 error.
I've also checked that the port the service is trying to use isn't in use
and the inventory service objects in C1 and can't see any issues.
Anybody have any ideas?

I would chek to make sure that your JAVA search settings are correct on your
server
SYS:\JAVA\BIN
SYS:\JAVA\NWGFX\BIN
SYS:\JAVA\NJCLV2\BIN
should all be in the path.
I have seen these entries as either missing or pointing to the wrong
location as a cause of similar problems.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared either Novell or any rational human.
<[email protected]> wrote in message
news:VpTEh.1580$[email protected]..
> We're running Zenworks 6.5 on a Netware 6.5 SP2 server.
>
> We recently applied the Zenworks 6.5 support pack 2 and since then we've
> been unable to start the Inventory service.
>
> When we type StartSer * at the console the error that comes back from the
> logger screen is: java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory Start
> Service exited with status -1.
>
> I've checked the database and it appears to load correctly. The database
> runs on the same server as the Inventory service.
>
> I've checked the Status in the inventory service object and the last
> status
> is a 602 error.
>
> I've also checked that the port the service is trying to use isn't in use
> and the inventory service objects in C1 and can't see any issues.
>
> Anybody have any ideas?
>

Device Stuck in "All Learning Devices in Inventory Services"

LMS Version 4.2.5
one 6509 stuck in "All Learning Devices in Inventory Services"
    *** Data Collector Status Information ***
Discovery Progress    = 10% completed
Error Code                   = N/A
Error Message             = N/A
I have remove this device and add again,and also adjust the snmp timeout ,this device still stuck in learning state.
But,this device inventory collection and config archive function is ok.
Is this a bug,or how can I do next?

Is it happening just for a single device ?
are all the other devices are in KNown status .
Any firewall between this device and LMS ?
Thanks-
Afroz

Printing on HP Designjet 5500 with foomativ exits with status 9

Printing on HP Designjet 5500 over TCP/IP or Bonjour using Foomatic-RIP fails with status 9. Trying to use other drivers (HP Designjet 750C (gimp-print)) works for page sizes smaller that DIN A3 but crashs the printer for bigger sizes.
For Foomatic-RIP I get following messages in /var/log/cups/error_log:
I \[08/Jul/2009:19:18:29 \+0200] Job 10 queued on '129_247_20514' by ''.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/pstopdffilter (PID 14639) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/cgpdftopdf (PID 14640) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 14641) for job 10.
I \[08/Jul/2009:19:18:29 \+0200] Started backend /usr/libexec/cups/backend/lpd (PID 14642) for job 10.
E \[08/Jul/2009:19:18:30 \+0200] PID 14641 stopped with status 9!
I \[08/Jul/2009:19:18:30 \+0200] Hint: Try setting the LogLevel to "debug" to find out more.
I have the following configuration:
OS-X 10.4.11, gs 8.6.4, pxlmono 1.2, Foomatic-RIP 4.0.2.211, HP DesignJet_5500-cdnj500.ppd
The printer is connected on Ethernet and is in the same network segement (it is visible in AppleTalk and Bonjour. A connection with TCP/IP (lpd) is also possible.
Message was edited by: Lefti

I've built foomatic against the ghostscript install as your instructions say; compilation and installation all seems to be fine with no errors but prints still do not appear on the printer.
Is there anything else I can try?
Many Thanks and apologies for the huge length of this post...
Sam
GPL Ghostscript 8.70 (2009-07-31)
gs -h | grep 'cdnj500': cdj550 cdj670 cdj850 cdj880 cdj890 cdj970 cdjcolor cdjmono cdnj500 cfax
foomatic rip version 4.0.2.211
One thing that I have noticed is that the cups error log has a lot of authentication entries, though they all seem to result in OK;
D [18/Aug/2009:14:17:00 +0100] cupsdReadClient: 15 POST / HTTP/1.1
D [18/Aug/2009:14:17:00 +0100] cupsdAuthorize: No authentication data provided.
D [18/Aug/2009:14:17:00 +0100] Get-Printer-Attributes ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] cupsdProcessIPPRequest: 15 status_code=0 (successful-ok)
This is the output from the foomatic log:
foomatic-rip version 4.0.2.211 running...
called with arguments: '3', 'sam', 'testprint.ps', '1', 'APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Getting input from file
Parsing PPD file ...
Added option PageSize
Added option ImageableArea
Added option PaperDimension
Added option InputSlot
Added option Quality
Added option Font
Parameter Summary
Spooler: cups
Printer: 43_194_241139
Shell: /bin/bash
PPD file: /private/etc/cups/ppd/43_194_241139.ppd
ATTR file:
Printer model: HP DesignJet 5500 Foomatic/cdnj500 (recommended)
Options: APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f
Job title: testprint.ps
File(s) to be printed:
<STDIN>
Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts
Printing system options:
Pondering option 'APDInputSlot='
Unknown option APDInputSlot=.
Pondering option 'pserrorhandler-requested=standard'
Unknown option pserrorhandler-requested=standard.
Pondering option 'nocollate'
Unknown boolean option "nocollate".
Pondering option 'com.apple.print.PrintSettings.PMColorMatchingMode..n.=0'
Unknown option com.apple.print.PrintSettings.PMColorMatchingMode..n.=0.
Pondering option 'com.apple.print.JobInfo.PMJobName=testprint.ps'
Unknown option com.apple.print.JobInfo.PMJobName=testprint.ps.
Pondering option 'APColorMatchingMode=APApplicationColorMatching'
Unknown option APColorMatchingMode=APApplicationColorMatching.
Pondering option 'job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f'
Unknown option job-uuid=urn:uuid:1ef0b25d-dd27-3022-64ab-19ebcf88a67f.
Options from the PPD file:
Starting process "reset-file" (generation 1)
reset-file exited with status 0
================================================
File: <STDIN>
================================================
Filetype: PostScript
Reading PostScript input ...
--> This document is DSC-conforming!
Found RBINumCopies: 1
Found: %%BeginProlog
Found: %%EndProlog
Found: %%BeginSetup
Found: %%BeginFeature: *PageSize Letter
Option: PageSize=Letter
Setting option
Found: %% FoomaticRIPOptionSetting: PageSize=Letter
Option: PageSize=Letter
Setting option
Found: %%BeginFeature: *Quality normal
Option: Quality=normal
Setting option
Found: %% FoomaticRIPOptionSetting: Quality=normal
Option: Quality=normal
Setting option
Found: %%EndSetup
Inserting PostScript code for CUPS' page accounting
New page: %%Page: 1 1
Found: %%BeginPageSetup
Inserting option code into "PageSetup" section.
Flushing FIFO.
Starting renderer with command: "/usr/local/bin/gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=cdnj500 -dDEVICEWIDTHPOINTS=612 -dDEVICEHEIGHTPOINTS=792 -dQuality=0 -sOutputFile=%stdout -_"
Starting process "kid3" (generation 1)
Closing renderer
Starting process "kid4" (generation 2)
Starting process "renderer" (generation 2)
JCL: -12345X@PJL
@PJL SET MEDIASOURCE=AUTOSELECT
@PJL SET CUTTER=OFF
<job data> -12345X@PJL RESET
PAGE: 1 1
renderer exited with status 0
kid4 exited with status 0
kid3 finished
kid3 exited with status 0
Closing foomatic-rip.
And the output from CUPS error_log (trimmed to remove duplicates etc.):
D [18/Aug/2009:14:17:00 +0100] Print-Job ipp://localhost/printers/designjet5500__Q1251A___00306ECA2FB9
D [18/Aug/2009:14:17:00 +0100] [Job ???] Auto-typing file...
I [18/Aug/2009:14:17:00 +0100] [Job ???] Request file type is application/postscript.
D [18/Aug/2009:14:17:00 +0100] add_job: requesting-user-name="sam"
D [18/Aug/2009:14:17:00 +0100] Adding default job-sheets values "none,none"...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding start banner page "none".
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-created event...
I [18/Aug/2009:14:17:00 +0100] [Job 2] Adding end banner page "none".
I [18/Aug/2009:14:17:00 +0100] [Job 2] File of type application/postscript queued by "sam".
D [18/Aug/2009:14:17:00 +0100] [Job 2] hold_until=0
D [18/Aug/2009:14:17:00 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] job-sheets=none,none
D [18/Aug/2009:14:17:00 +0100] [Job 2] banner_page = 0
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[0]="designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[1]="2"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[2]="sam"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[3]="testprint.ps"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[4]="1"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[5]="APDInputSlot= pserrorhandler-requested=standard nocollate com.apple.print.PrintSettings.PMColorMatchingMode..n.=0 com.apple.print.JobInfo.PMJobName=testprint.ps APColorMatchingMode=APApplicationColorMatching job-uuid=urn:uuid:b5be6143-9e7f-3cd7-6719-7df9ce42aa47"
D [18/Aug/2009:14:17:00 +0100] [Job 2] argv[6]="/private/var/spool/cups/d00002-001"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[0]="<CFProcessPath>"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[2]="CUPS_DATADIR=/usr/share/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[8]="CUPS_STATEDIR=/private/var/run/cups"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[9]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[10]="[email protected]"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[11]="SOFTWARE=CUPS/1.3.8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[12]="TMPDIR=/private/var/spool/cups/tmp"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[13]="USER=root"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[14]="CUPS_SERVER=/private/var/run/cupsd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[15]="CUPS_ENCRYPTION=IfRequested"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[16]="IPP_PORT=631"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[17]="CHARSET=utf-8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[18]="LANG=en_US.UTF8"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[19]="APPLE_LANGUAGE=en-US"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[20]="PPD=/private/etc/cups/ppd/designjet5500__Q1251A___00306ECA2FB9.ppd"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[21]="RIPMAXCACHE=8m"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[22]="CONTENT_TYPE=application/postscript"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[23]="DEVICEURI=mdns://designjet%205500%20%28Q1251A%29%20%2800306ECA2FB9%29._pdl-datastream.tcp.local./?bidi"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[24]="PRINTER=designjet5500__Q1251A___00306ECA2FB9"
D [18/Aug/2009:14:17:00 +0100] [Job 2] envp[25]="FINALCONTENT_TYPE=printer/designjet_5500__Q1251A___00306ECA2FB9"
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/pstops (PID 71849)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started filter /usr/libexec/cups/filter/foomatic-rip (PID 71850)
I [18/Aug/2009:14:17:00 +0100] [Job 2] Started backend /usr/libexec/cups/backend/mdns (PID 71851)
D [18/Aug/2009:14:17:00 +0100] Discarding unused job-state-changed event...
D [18/Aug/2009:14:17:00 +0100] [Job 2] mdns backend exec'ing /usr/libexec/cups/backend/socket to connect to socket://NPICA2FB9.local.:9100/?bidi
D [18/Aug/2009:14:17:02 +0100] [Job 2] Connected to 43.194.241.139:9100 (IPv4)...
D [18/Aug/2009:14:17:02 +0100] [Job 2] backendRunLoop(print_fd=0, device_fd=5, use_bc=1, side_cb=0x765bb388)
D [18/Aug/2009:14:17:02 +0100] Discarding unused printer-state-changed event...
D [18/Aug/2009:14:17:07 +0100] [Job 2] Page = 612x792; 14,34 to 598,778
D [18/Aug/2009:14:17:07 +0100] [Job 2] slow_collate=0, slow_duplex=0, slow_order=0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_comments - %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %!PS-Adobe-3.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%BoundingBox: 0 0 612 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Pages: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%LanguageLevel: 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentData: Clean7Bit
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentSuppliedResources: procset testprint/1.3
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%DocumentNeededResources: font Helvetica Helvetica-Bold Times-Roman
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Creator: Michael Sweet, Apple Inc.
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%CreationDate: D:20070606214000+0500
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%Title: Test Page
D [18/Aug/2009:14:17:07 +0100] [Job 2] %%EndComments
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_prolog - %%BeginProlog
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before copy_setup - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Before page loop - %%Page: 1 1
D [18/Aug/2009:14:17:07 +0100] [Job 2] Copying page 1...
D [18/Aug/2009:14:17:07 +0100] [Job 2] pagew = 583.7, pagel = 743.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] bboxx = 0, bboxy = 0, bboxw = 612, bboxl = 792
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageLeft = 14.2, PageRight = 597.8
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageTop = 777.8, PageBottom = 34.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] PageWidth = 612.0, PageLength = 792.0
D [18/Aug/2009:14:17:07 +0100] [Job 2] Wrote 1 pages...
D [18/Aug/2009:14:17:07 +0100] PID 71849 (/usr/libexec/cups/filter/pstops) exited with no errors.
D [18/Aug/2009:14:17:09 +0100] [Job 2] Read 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] [Job 2] Wrote 8192 bytes of print data...
D [18/Aug/2009:14:17:09 +0100] PID 71850 (/usr/libexec/cups/filter/foomatic-rip) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] PID 71851 (/usr/libexec/cups/backend/mdns) exited with no errors.
D [18/Aug/2009:14:17:14 +0100] [Job 2] File 0 is complete.
I [18/Aug/2009:14:17:14 +0100] [Job 2] Completed successfully.
D [18/Aug/2009:14:17:15 +0100] [Job 2] Unloading...

Java page fault with inventory service

Hi
Having an issue with java and the inventory service. Shortly after
lunching I get the following error:
java: Page fault processor exception occurred while executing class
com.novell.z
enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
State of Registers at Processor Exception:
EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
The exception occurred while executing code in: JVM.NLM (8dbbe000)
The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
java: Class
com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
ServiceManager exited with status -5
I have not been able to track down a tid.
Thanks,
Will

Sorry forgot the specs:
Zen sp1 ir3a hp2
netWare 6.5 sp6.
Java Version 1.42.07
Will K wrote:
> Hi
>
> Having an issue with java and the inventory service. Shortly after
> lunching I get the following error:
>
> -------------------------------------------------------------------------------
>
> java: Page fault processor exception occurred while executing class
> com.novell.z
> enworks.desktop.inventory.servercommon.ZENWorksInv entoryServiceManager
>
> State of Registers at Processor Exception:
> EIP=8DDC4A7C, EFLAGS=10212, EAX=0, ECX=D9917A08, EDX=50,
> EBX=7070A86C, ESP=7070A834, EBP=7070A834, ESI=7070A87C, EDI=D9917A08,
>
> The exception occurred while executing code in: JVM.NLM (8dbbe000)
> The exception occurred while running thread: Java_1845 XMLTime (A63980E0)
> -------------------------------------------------------------------------------
>
> java: Class
> com.novell.zenworks.desktop.inventory.servercommon .ZENWorksInventory
> ServiceManager exited with status -5
>
> I have not been able to track down a tid.
>
> Thanks,
>
> Will

HT1923 I was trying to update itunes on my computer received an error message so I uninstalled and reinstalled itunes. the download stopped with this message "Service 'Apple Mobile Device' failed to start. I have an ipad 2 purchased in 2011.

I was trying to update itunes on my computer that has windows vista. during the update I received an error message; so I uninstalled itunes and reinstalled it. the instatlation process stopped with this message: "Service 'Apple Mobile Device' failed to start. Verify thta you have sufficient priviledges to start system services." I have used an ipad 2 since 2011 and have never had a problem with my itunes account or my ipad until now.
What steps do I need to complete to get my itunes account up and running again?

Hi Kayleenfromwi,
Thanks for using Apple Support Communities. You may need to restart the Apple Mobile Device Service. This article has instructions for doing this:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
If that doesn't resolve the issue, I would recommend trying the steps in this article:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

5 IDOC with status 29 Error in ALE service

hi there,
im looking at this similar problem with less information on me the only info i got is this can anyone help me out pls
IDOC Status Outbox:
IDOC failure between 13/07/2008 to 14/07/2009
1 IDOC with status 02 Error passing data to port
5 IDOC with status 29 Error in ALE service
IDOC Status InBox:
88 IDOC with status 51 Application document not posted
regards
raju

Hi,
Check this thread.
DB13-DBCHECK by saving log-throwing DUMP:TSV_TNEW_BLOCKS_NO_ROLL_MEMORY
Regards.

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?

I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content.

Printing Problem - the process "mdns" stopped unexpectedly with status 1

I have been trying to get my Epson Stylus rX620 to print wirelessly for a while. It actually worked once and printed two separate documents. Then however it decided not to work any longer and it seems that nothing I do changes it. The same error message appears each time in the print monitor:
the process "mdns" stopped unexpectedly with status 1
It has printed wirelessly with the same equipment. It is attached to an airport express that is linked to extend my wireless network from an Airport Extreme. It has no problem printing when the USB cable is plugged in directly. I have tried everthing that I can think of. Any ideas??

Hi John,
Okay, that was some new information...
Given that the hub is causing the problem then I would concentrate on testing it. Try connecting the Mac and the printer directly to the hub. Ensure the IP addresses of each device (Mac and Printer) are set to the same subnet (if printing via TCP/IP) or if AppleTalk is being used, make sure it is enabled on both devices.
You may also have to create a new printer. When you had the printer connected to the USB port of the AEBS, it will have been configured as a local device but printing via a virtual USB port. When the printer was connected to the hub, it would have been configured as a network device.
If this works then at least you know that the hub and the network cables are okay. The next step would be to ensure the AEBS, the printer and the Mac are all set to use the same protocol.
If they are all correct then try deleting the printer from the Printer List, running the Reset Printing System function and adding the network printer again. If you are using TCP/IP, you could even try pinging the printer to ensure the path to the printer is open.
Regards,
Paul

Inventory service stops with status -1

Similar Messages

Maybe you are looking for