Log creation for changes in Process Order

Hi,
We need a feature in which we need a log to created for any changes to process order. For example if qty of a component is changed, the log will records the old qty, time of change & who changed it. Similarly it should record other things like inserting/deletion of a component, insertion of a new resource etc.
Note that the log of status change in process order does not serve the purpose.
Please provide some solution to this.
regards,
Mohit

Hello Mohit,
You need to implement Order change management (OCM). Explore detail functionality and capabilities of it in help.sap portal . Also there are tons of material on it in SDN forum . Refer SAP note 390635 for more information
If you have any query on any particular area on it then let us know .
I hope the information helps
Cheers
Kaushik

Similar Messages

Tolerance limit for Components in Process Order

Dear Friends,
As we can provide underdelivery / overdelivery tolerance for GR of process order, likewise is it possible to provide tolerance for BOM components in process order?
The requirement is like that confirmation should be allowed with GI done within + / - 5 % of BOM qty in process order. Is it possible to cater this requirement with any exit / BAdi?
Kindly help with your valuable inputs.
Thanks in advance.
Regards,
Tejas

Dear,
Thanks for your prompt reply. Actually I have been already working on this exit only.But me & my technical fellow are stuck up for build logic for tolerance limit. It is working to restrict confirmation till GI has been done. But we are unable to give provision of tolerance limit for GI with this exit.
Can you pls share more details about writing logic for it?
Regards,
Tejas

Material list layout need to be changed in Process Order

Hi All,
       I am using 4.6 B , here I want to change the process order material list layout .In the later version (4.7 & ECC 5.0) I could able to find the option 'Change Layout' in the process order itself. Incase of 4.6B no such like option found .So could anyone know me where shoud I can change the layout .
   Particulary I need to change the sequence of columns in layout.
Thanks in advance.
Anil

Hi Amit,
     I have tried the option already , but could not able to alter the sequence of the fields apart from the hiding of fields .I required to alter into customer defined sequence of fields in the layout , so would appreciate your suggestions on this .
Thanks
Anil

02 STO 's for a single process order

Hi All,
Can anyone explain me whether there any problem in getting two STO's for a single process order?
If its a problem how to generate only one STO for a one process order?

Hi Mallika,
can you explain your sceanrio . i am not able to understand your requirement.....
Regards,
Venkat.

User exit or FM to change the process order

Hi All,
I want to know any FM or user exit to change the process order.
Any help will be appreciated.
Regards,
Seema
Edited by: Seema Naharia on Dec 10, 2009 8:41 AM
Edited by: Seema Naharia on Dec 10, 2009 8:42 AM

Hi Nihad,
I couldnot find this BAPI.
Regards,
Seema

How to find Missing Parts for a particular Process Order?

Hi,
How to find Missing Parts for a particular Process Order ?
Is there any function module or Table ??
Thnx in Advance.

Hi prince roy
you can use the T-code = <b>CO24 - Missing Parts Info System</b>
if helpful PLEASE REWARD YOUR POINTS
thanks
chakri

Prodcution Scheduling Profile for without material process order

Hello Gurus,
I am creating process order without material and assigning Production Scheduling Profile in assignment tab. Production Scheduling Profile has release on creation activated in configure, but when I save process order its not released, it remains as CRTD.
When I am creating process order with material as you know Production Scheduling Profile is copied from material master and when I save process order, its automatically released.
I am assigning same Production Scheduling Profile which I am using for second case listed above.
Any ideas?
Thanks
Bhavesh Patel

Dear Patel,
I Already told, once , you are in order screen, system status will set as CRTD, after that if U assigned, the PSP, It won't work, In case of COR1, material have PSP, If you convert planned order to production, release is triggered in background before the status is created.
If you have still doubt
Create a order in COR1, When you enter the quantity and start date finish date then release is carried out and the status is set as CRTD
in CORO
It is not possible to maintain PSP before entering the qty and Dates
Once U entered the dates, Sytem set the status as created, After you assigna PSP, It won't work
Regards,
Sundaresan
Edited by: Sundaresan . E. V on Sep 14, 2010 7:01 PM

Sched.start date not allowing on week-ends for fwd scheduling process order

Hello Experts,
For a process order & scheduling typr forward/in time if I take sat or sunday as a start date then if I click on schedule, system changes it to previous workin day (friday). But however if i select backward/in time scheduling type & put week ends as finish day then system does not change this date.
How can I make system to allow schedule start date on week ends also for forward/in time scheduling type. in a factory calendor sat & sunday are holidays. while for work center, calender sat & sunday are marked as working days.
Thanks for advance,
Vijay.

Hi
it depends upon client requirement.you must have defined the holiday calender as well.if you select the public holidays in your factory calender.then system will allow you to do your daily transctions on public holidays as well and vice versa.so better go with all options selected .and plz check at your end
plz revert back if it works
Regards
Anupam Sharma

Batch Determination for material in Process Order

Hello,
I need to set up a Batch determination strategy for the Raw material at IM level for a Process Order.
Basically the materials are Batch Managed and already have a Batch number assigned to it.
I just want to use a simple strategy of determining material with the oldest GR datel(FIFO) during the Process Order creation/release or during the Process Order confirmation.
Can you guide me how to set up the strategy and the conditions to do a FIFO for the materials during the Process order.
Thanks in Advance
SAP FANS....

Hi,
Only Problem with this FIFO strategy in which you want to do Batch Determination with reference to Oldest GR date is GR date itself.
Batch determination will only possible if Batch Characteristic values are maintain.What I have observe for this GR date is if we use this as a Reference Characteristic in that case also Value is not set automatically in the Batch Data, so value of the GR date is maintain manually.Pls check it your end if no problem then The rest of the things for Batch determination are not difficult.
Use below link for Batch determination,
[Batch Management and Determination |Re: Browser Based PI sheet]
Regards,
Dhaval

Automatic Creation of Batch in Process Order Confirmation

Hi Guru,
What are settings required to set the batch creation automatic during the confirmation of the process order? The header material is semifinished and batch management is ticked in the material master. BOM has been created. In the present scenario, few
Regards,
Raja

Hi,
You can do that in T Code CORW.
For the required production scheduler select the batch creation for process order.
Also in the Assignment tab of the process order, there is a field for batch, next to it there is a Create button. Click that, you will get the batch number in that field.
Hope that helps.
Regards,
Rohit.
Added: I apologise, its not the Assignment tab in process order. It is Goods Receipt tab.
Edited by: Rohit Chauhan on Aug 3, 2009 9:42 AM

Changes in process order against actual/standard bom

Dear GURUS
We are from Process Industry.
Suppose there is finished material A. Components of A (BOM) for qty - 1
Component    qty.
   X                 1
   Y                 2
   Z                  3
One process order is created of A for qty 1.
Then I had deleted the component Z from the created po and change the qty Y from 2 to 3 or any one.
How can I track these changes against standard bom? Is there any report for same.
I would also like to know the deviation in process order against standard bom and issued qty against BOM.
I try Tcode COOISPI . Table STPO and RESB but not getting success.
Also try MCRX, MCRE but it show actual issed against process order qty. But I would like to see diff. bet. Actual BOM , Process order and actual qty.
Regards
Rajan

Hi Rajan,
I think that this kind of control is designed in SAP through CO, meaning that in product cost controlling you have 3 sets of costs: standard as per BOM, target as per the definition in the the production order (e.g. after you changed the components), and actual as per the actual goods issues.
These sets contain not only costs data, but also quantities.
There's also very nice functionality to do a variance analisys between the three, again, not only cost but also quantity.
Regards,
Mario

Quantity Change At process order?

Dear Guruji
I am Realse Process order as per Std BOM. But at conformation Tranziction I am Changed Planed Quantity.How Can I tressiblae That only that Process order Which is change in planed quantity at Goods Issue?

Dear,
There is no tracking mechanism in SAP. If you dont want users to change the component during confirmation, then you create a transaction variant for CO11N transaction, and define in such a way that Component quantity field is greyed out and also delete button is also removed.
If you search this Forum you will find suitable threads explaining the process of creating transaction variants.
Regards,
Prasobh

Automated TR creation while release the Process Order

I have to split the quantity into smaller units based on the ‘LE quantity’ before TR creation. In transaction LB03, there should be additional line items after the quantity split.
I am using the EXIT ‘EXIT_SAPLLCPP_001’. It is triggering during the transaction run. But it doesn’t serve the purpose.
Can anyone help me to achieve this functionality?

Hi,
In Process Order Header Screen Go to ---> Log ---> On Release.Here you will find the detail error behind this problem.Go though it .Resolve it and then try to release the Process Order, and if required get back to us.
Suppose reason may be,
- Missing part
- Missing Capacity
- Batch Determination is required to perform.
- Any User Exit (Other then std. SAP)
Regards,
Dhaval

Track material change in process order.

I have one process order
In this process order some buddy has change the material quantity &order is save Now again same change to previous one and order is save.
Now I want to track this changes. Is there any way out Plz help
Regards,
Parag Save.

Hi,
Check whether you have activate the OCM ( Change Management for Production Order ) in your system (In tocde : OPL9 and OPL7), if it is activated then only you can see the changes carried out in an order other wise you can only check the High level like when the last change was carried out and by whom.
Hope this will help you.
regards
radhak mk

SAP QM Inprocess Inspection for a specific Process order type

Dear All,
There is a requirement. As no QM type is maintained for FG material in a plant. Now the requirement is there is a specific order type for which Inprocess Inspection is to be activated for all the FG materials. But at the same tie for all other order types there won't be any inspection for the same set of FG material.
I tried creation Z03 by copying 03 inspection type. But the problem is source inspection is from Production. So Z03 is not confined to only the specific process order but instead it is generating inspection lot for other Process order also.
Is it possible to create a scenario where we can attach inprocess inspection to a specific order type only.
Regards,
Rahul

Hi,
You can assign the in process inspection to Order type in SPRO as shown below in the process order type dependent parameters in Planning tab in COR4.
Check and revert..
Thanks
Kumar

Log creation for changes in Process Order

Similar Messages

Maybe you are looking for