Mid month period not being calculated in pay slip

Hi Experts,
Mid month period given in 0008 is not being calculated. 
     e.g. if i hire some one on 16.01.09, then 0008 data should be calculated for those days only (e.g. 16 days) in pay slip.   But in my case it is taking full amount of 0008. 
Can any one kindly help, pl.
thanks
Balu

Dear Sikindar,
thanks for the replay.
PCL 1 and PCL10 are having 3 and 1 respectively.
checked  the control record and the pay roll area of that employee and generation of pay roll periods are available in  V_T549Q.
please guide me further
thanks
Balu

Similar Messages

  • Employer Unemployment Tax Not Being calculated in US Payroll

    Hi Experts,
    Employer Unemployment Tax (Tax Type 10) for Tax Authority Alabama is not being calculated in US Payroll in my SAP system.
    The taxable amt is showing up, but the tax is not being calculated in the payroll log.
    No error/warning mssg is provided by BSI in the payroll log.
    I have already checked for the following:
    1)We are using the standard tax model 002 provided by SAP for Alabama
    The tax model settings are fine.
    2) Table T5UTX is being maintained.
    3) Tax Type 10 is setup against tax auth Alabama in BSI Tax Factory.
    For tax auth Federal too, though the taxable for tax type 10 shows up, tax is not being calculated.
    Can you please help.
    Regards,
    Somdeb.

    Hello Somdeb,
    Please be aware that this is no standard SAP tax model only an example which must be customized as every customer is different.
    First check the payroll log to see if the information is being sent to BSI TaxFactory. If not then the issue is mostly the tax model. Different tax models can be used based on the employee.
    If the values are being sent to BSI and not being calculated, then there is an issue wil BSI. Send BSI the script and they will tell you what the issue is.
    Regards,
    Manny

  • Pricing condition for Taxes in R/3 not being calculated.

    We have SRM4.0 in classic mode with R/3 4.6C. In SRM we configured Tax calculation is in R/3. When creating the shopping cart, EBP calls R/3 via RFC for the Tax % and displays the tax information in the cart successfully. The cart is saved and the completed PO is created in R/3. However, our pricing condition for tax, at Pur.Org/Material group in R/3 does not get calculated - so in the item condition screen, no tax is calculated. If i go into the change PO and in Item conditions/Update, (G-Copy Pricing and Redetermine taxes) then it is OK (but this is not ideal). When i do an RFC trace, using RSRFCTRC, i can see my Pur Org, Material Group and Tax code all being passed to R/3. Also, when i do a manual SE37 test on funct.mod. BAPI_PO_CREATE, it does calculate tax correctly - i am stuck - any help appreciated. rgs Adam

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Mid Month Joining-PF Basis Calculation

    Hi All,
    I have an emplyee whose joining is in the 3rd week of the month 23.04.2011.
    His basic is 25000, 8 days working basic is 6667.
    I want to restrict his PF contribution to PF at 780 his actual contri coming as 800, 12% of basic.
    Here i want that system should maintain his PF as 780 not 800.
    I tried marking Eligible pay Or Pf BAsis Which ever is less but of no use.
    I have already gone through the Threads which suggest to go through User Exit: Override Employer Pension Basis.But it is not for PF Basis.
    If any PCR is available for the same ?
    Can any body guide me on the same?

    Hi,
    the system is working fine if the person is present in the trust the full month by selecting the Eligible Pay Or PF base pay
    which ever is  less.
    But when it comes to joining in the end of the month say 23 or 25th of the month & the employee is present in the trust for 8 or 5 days & if i try to take the basic as 6500 although the basic is higher than 6500(actual basic 25000, ,8 days-6667),if i select the
    Eligible Pay Or PF base pay which ever is  less,either it doest take the 6500 consideration or it calculates PF as 208.
    Puting the RT details here when  Eligible Pay Or PF base pay which ever is  less is selected.
    /101 Total gross                                                             11,223.33
    /111 EPF Basis                                                                6,666.67
    /112 ESI Basis                                                                 11,223.33
    /113 ESI Basis N                         26,666.67                    11,010.00
    /114 HRA Basis                                                              6,666.67
    /115 COA/CLA Bas                                                         9,973.33
    /116 Gratuity Ba                                                            6,666.67
    /117 Superannuat                                                         6,666.67
    /120 Nom. ExGrat                         26,666.67                  6,666.67
    /121 Nom. ExGrat                         26,666.67                6,666.67
    /124 Mon Reg Inc                                                           9,973.33
    /125 Mon Irr Inc                                                             1,250.00
    /128 Leave Encas                                                           6,666.67
    /129 Voluntary R                                                           25,000.01
    /134 Annual Non-                                                          1,250.00
    /136 1DSD Basis                                                             6,666.67
    /137 1DSD Basis                                                             6,666.67
    /138 Form 217 2(                                                           11,223.33
    /139 VPF Basis                                                                6,666.67
    /140 LWF Basis                                                              6,880.00
    /3F1 Ee PF contr0101                                                     208.00
    /3F3 Er PF contr0101                                                    245.00
    /3F4 Er Pension 0101                                                   555.00
    /3F5 Ee Mon PF c                                                          208.00
    /3F6 Ee Ann PF c                                                           8,788.00
    /3F7 EDLI contri0101                                                   3,333,335.00
    /3F8 EDLI adm ch0101                                                66,667.00
    /3F9 PF adm chrg0101                                                7,333,337.00
    /3FA PF basis fo0101                                                 1,733.00
    /3FB PF Basis fo0101                                                 6,667.00
    /3FC Pension Bas0101                                                 6,667.00
    /3FJ VPF basis f0101                                                 1,733.00
    /3FL PF Basis fo0101                                                 6,667.00
    /3I1 Deduction u                                                     8,788.00
    /3I2 Gross amoun                                                     8,788.00

  • Over Charged $20 dollars each month and not being reimbursed

    I bought a pre paid plan for $80 dollars in March 2013. Set the auto payment on it with credit card.End of march changed it to $60 plan
    After few months saw the bank statements and text messages verizon send they were still charging me $80 dollars though online it showed I had signed for $60 plan.Called them in sept .... (should have called earlier) and they saw "yes I had changed my plan to $60 dollars but the change did not go through seems like a software gliche". She tried for 2 hrs but could not fix it and reassured me that it will be fixed within 72  hrs and reference ticket #<Ticket number removed<. Well they did fix it that my credit card was charged $60 but did not reiemburse for the six months they overcharged me total of $120.Finally I call and say I need an answer today and they say we can give credit for only one month and you will have to dispute the rest with your credit card company.
    well for that I need account details from March and since I am prepaid customer I can only view current month details. So I asked her give the details but she refused.
    I asked her can you see on your end when I changed the plan and what month and  she replied "yes you changed it for April but I cannot give you that info"
    So bottom line they mess up you pay and  once thay have your money by hook or crook they are not going to give it back even if you have a valid case.
    Message was edited by: Verizon Moderator><

    jeroen25 wrote:
    I never authorised this,
    can you explain me where the money went to? and how to get it back
    Hello and welcome to the Skype Community.
    Your account shows that on December 25th 2013 you purchased a Ukraine 800 mins 1 month Subscription. This is a recurring Subscription and will automatically renew each month and charge your account with Euro 63.24 until canceled. You can cancel it at any time by visiting your account page.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • DP macros are not being calculated correctly using process chain

    Hello all!!
    I have this DP planning book with two grids, which the second grid has some macros. I have to put this macros execution in a Process Chain, but it´s very strange because, when I execute the macro directly in the interactive planning the result is correct, but when I execute it using the process chain, the result is wrong.
    The selection profile and the aggregation level in the Process Chain is the same that is being used in the selection profile.
    I´ve already created the activities and also the planning job to be used in the process chain.
    Could you help me?
    Best regards
    Angela

    I would suggest to create a test selection Id with a few products (say 5) and create a new job with this selection profile and include that job in the process chain and execute it. Please monitor the job log while porcessing... for this right click on the process in the process chain and select 'Display all jobs'..it will take you to the SM37 screen..there click the job log and spool file and observe what exactly the job is doing i.e whether its executing correctly or its skipping that process or something else is doing...
    The second thing you can try out is by creating a separate dataview for the second grid in the test sytem and replicate the scenario and check if it has any impact, my guess is if process chain is not supporting the macros in the second grid
    Edited by: sai balakavi on Dec 12, 2008 8:14 PM

  • Adobe Professional - Calculation not being calculated

    I created a form containing several fields where people
    input numeric values.  For the most part it is working however there is one box (the last box in red, where it doesn't calculate right away until they enter a number in another field.  Why is that?  Each time someone enters a number, that field should re-calculate right away after the user moves on to the next field.
    I cannot figure this problem out, please help.  I'm attaching a word document containing a screenshot of the problem.  I'm also attaching the PDF form.
    --Gilbert

    Change the field calculation order.

  • Basic Pay Split not happening for Mid Month Joining

    Hi Gurus,
    I am facing a problem running a payroll where the employee who is hired at the middle of the month the net pay should be half. But in my case the employee is getting a full month pay.
    I have Hired an employee on 20th of February.
    Planned working Time Status "0" No time Evaluation
    My Payroll Area is Monthly
    The Payroll Period is 25th to 24th of next month
    Pay date is 27th
    I am running payroll on 24th Feb the RT displays the net payable amount for the full month instead of  5 days Payment which is from 20 Feb to 24 feb.
    I have set the start dates in the following infotypes 0000, 0001, 0002, 0007, 0008 as  Start Date: 20th February  current year.
    I have assigned all my wage types the following Processing class:
    PRCL 1 Specification 3     WType included in valuation basis /001 and /002
    PRCL 10 Specification 1     Reduction with factor /801
    And PRCL 30 and 41 also are assigned appropriate specifications.
    Please guide how can I do it.
    Best Regards,
    KPJ

    Thanks Surisetti I resolved myself..if you could throw some light as the amount is not being calculated exactly..
    The month has working hrs 192.
    the amount in /001= 66 and /002=52
    The base salary is 10000 SAR
    and the TSSOLL= 39.5 for days from 20 Feb to 24 Feb
    So, Amount will be calculated /001 mutilply TSSOLL i.e (66 X 39.5)or
    /002 Mutiply 39.5 i.e (52 X 39.5)
    How would that be calculated...
    In general when base is 10000 SAR and monthly working hrs are 192
    10000 Divide by 192 is equal to 52 which is exactly equal to /002
    and now worked hrs in period 20 feb to 24 feb are 39.5
    So, basic should be (52 X 39.5)= 2,057 SAR
    The amount calculated in system is different ...could u please throw some light why its not calculating exact amount to be paid..
    Thanks & Regards,
    KPJ

  • I have been a customer since 1998 and have had a many as 6 phones paying up to $400/month, now at 4 phones and $268/month. Am being told that I owe $136 from 2011. If not waived I will move my phones and they will lose $136 in 1/2 month!!!

    I have been a customer since 1998 and have had a many as 6 phones paying up to $400/month, now at 4 phones and $268/month. Am being told that I owe $136 from 2011. If not waived I will move my phones and they will lose $136 in 1/2 month!!!

        @mdk57ask,
    Never fear help is here! I definitely don't want to see you go. I appreciate your long time loyalty and hope to stay together for many more years.
    To better assist you, I will need to access and review your account. Please follow me, JohnB_VZW, and send me a direct message so I can further assist. I'm sure we can get this resolved in no time.
    JohnB_VZW
    Follow us on Twitter @VZWSupport

  • Pay day for period end date as mid month.

    Hi All,
    plz suggest how to proceed.
    Payroll period starts from 15th of month to 14th of next month and payday is last working day of month having period end day.
    Example
    Period start day  15th April
    Period end day  14th May
    Pay day   last working day or last day of May for period 15th April to 14th May.

    Hi,
    I think what you are meeting with is Monthly End Accrual (MEA) senario.
    Pls check the following URL in PY US solutions:
    http://help.sap.com/saphelp_46C/helpdata/EN/d8/c9e93401bdee06e10000009b38f83b/frameset.htm
    The related node is under :
    Payroll United States (PY-US)->Final Payroll Processing (PY-US-FP)-> Month-End Accruals Concept
    Br,Kee

  • Mid-Month Calculations

    I am bringing a fixed asset system online in SAP and during the legacy conversion it was realized that the test system is not calculating the depreciation using a mid month convention.  That being said looking at the configuration the company code was setup in 2005 and is in production and is productive (since 2005).  So it appears that this setting is global and SAP will not allow me to change these settings to allow mid month calculations.  Is this correct? anyone ran across the same issue.

    Hi
    please read the note 2993 and 39416!
    Best Regards,
    Blaz

  • Chennai Ptax calculation during Withdrawn stage in mid month

    Hi Experts,
    As i know chennai Ptax is calculated twice in a year 6th and 12th or 5th and 11th period.
    But if employee resign during the mid cycle example:employee joined april and resigned in mid july, will ptax is calculated till that period or it will ignore ptax and run salary.
    Appricate your response.
    Regards
    Sai

    Hi Siva,
    Professional tax cannot be prorated as it is not deducted on basis of attendance.
    The Chennai professional tax is purely dependent on Gross Salary. For example an employee joined in the mid of the year for example an employee joined in the month of Feb and left in the month of august His/her gross salary is 10,000
    According to rule it will divide 10000 by 6 months His professional will get deducted according to slabs
    Many organizations deduct PT on a monthly basis by way of equal installments across a half –year period. For example, if an employee earns more Rs 15,000 each month (more than Rs 75,000 in a half-year), a sum of Rs 1095 should be deducted towards PT (please see the PT rate table above). Organizations following the equated monthly PT deduction method deduct Rs 182 (Rs 1095/6) each month towards PT in the monthly payroll. At the end of 6 months the organization will have deducted Rs 1095** for PT remittance. All is well.
    **Rs 182 x 6 is actually Rs 1092 and not Rs 1095. This rounding-off problem can be easily solved by simply adding Rs 3 to the PT deduction amount during payroll in any of the months during the half-year period.
    What happens if the employee does not work for the entire half-year period but leaves the organization at the end of say, 3 months? For example, let us assume that the employee works from 01-Apr-2012 to 30-Jun-2012 during the half-year period.
    The company will have deducted Rs 546 (Rs 182 x 3) for the 3 months as per the equated monthly PT deduction logic. For the 3 months, the employee earned Rs 45,000 (this is the half-yearly salary since the employee leaves the organization), and for Rs 45,000 the organization should have deducted only Rs 235 as PT (please see the PT rate table above). In addition, Rs 546, the deducted PT amount, does not fall in any PT slab as specified by the Chennai Corporation. Ideally, the organization should refund Rs 311 (PT deducted in excess) to the employee. In practice, most organizations just remit whatever PT is deducted from employee salary. We have come across instances where PT authorities have questioned the basis of PT deduction when PT amounts do not fall under any PT slab.
    There can also be instances when the equated PT deduction logic can lead to under-deduction of PT.
    Let us assume that an employee earns Rs 7,000 per month (Rs 42,000 in a half-year period). The PT deduction for a half-year period should be Rs 235 (as per the PT slabs). As per the equated PT deduction logic, the organization will deduct Rs 39 per month (Rs 235/6). If the employee leaves the organization at the end of 5 months, the organization will have deducted Rs 195 as PT. However for an employee salary of Rs 35,000 (Rs 7,000 x 5 months), the organization should have deducted Rs 235. This is a case of under-deduction of PT.
    The flaws of the equated PT deduction logic will come to the fore for any employee who does not work the entire six months in a half-year period.
    If you are in favour of the equated PT deduction method and argue that you can always adjust the excess or short PT in the final settlement processing if an employee quits before the end of the half-year period, we will simply say that this will not be possible in case an employee absconds or does not have adequate settlement salary to recover the short PT in full.
    In other words, the equated PT deduction logic is flawed and is better not followed. Of course, if an organization does not deduct PT each month but deducts PT only once every half year, this problem will not occur.

  • Mid month convention - Period Control method

    Hi
    My client wants to calculate depreciation for mid month. i.e, Asset acquired after 15th of a month should be considered for next month depreciation calculation.
    A new dep key and period control have been asked to create.
    In this case, what are the steps that needs to be done?
    Pl help me out.
    Thanx..
    Prasad

    Copy a key and start it with Z.For period control use the second one, which is called "pro rata upto mid-period per period start date. What this method does is if the asset is put in service upto the middle of the period(month-generally) the depreciation starts beginning of the period, if it is after the middle of the period the start date is the beginning of the next period(month).
    Please assign points for this correct answer.

  • Mid Month Calculation for Year dependent fiscal year

    Hi All,
    We are in middle of AA implementation .How can we configure mid month in year dependent fiscal year .System doesn't allow to put mid month date for year dependent fiscal year.
    If we copy co.code from best practice co.code BP01 system updates date this table in back round.
    But we are not copying from BP01.
    Any one has configure this for year dependent please input.
    Thanks,

    Hi,
    this function is not possible, you have to use a fiscal year variant with 24 real periods instead.
    Check the IMG documentation concerning "Use of Half Months in the Company Code":
    - When you specify the use of half periods in the definition of an asset company code, half periods are automatically specified in all other company codes that use this fiscal year version.
    - You cannot use half periods with non-calendar fiscal months.
    - You cannot take back the use of half periods once the specification has been made.  It is noted internally by the system in the asset master records.
    Regards,
    Markus

  • OHS - Protocol (Periodic) Next due dates are not being captured properly

    Protocol (Periodic) Next due dates are not being captured properly in the Planning Cockpit (EHSH_D_PCP) report nor the Protocol report (S_SH8_7200013).  The Planned date is not resetting itself for the medical service sometimes.
    Any idea what might be causing this issue?
    Regards
    Naveen

    HI Naveen
    Have you overridden the std BADI for calculating Next due date?
    Thanks
    Jagdsh

Maybe you are looking for