NODIM at Transfer rule level

I have a characteristic infoobject in a transfer rule.  I would like to just have the number part of a key figure in this characteristic – is there a way to do this in the transfer rule ie Function module – similar to NODIM?  Thanks

Hi Anil,
Thanks for this.  What I am trying to do is as follows
1.     Have an R3 field – TYPE QUAN
2.     This field will be extracted as is to a Key Figure
3.     I will have a characteristic TYPE NUMC which needs to just store the value which comes from the original field
How would I do this?  My understanding is that if I do a 1:1 it would not be good practice since the original also has units

Similar Messages

  • Need Routine At Transfer rules level?

    Hi Friends,
    Requirement:
    Values from flatfile (infoobject 0material):      Values in the table /BIC/ZMAT.
    00.11.22.33                                               -->    HBL00.11.22.33
    90123456                                                  -->    90123456
    91122334                                                  -->    HBL91122334
    And if in the flatfile
    value Starting with Alphates                     -->   A dummy number should be assigned something like '99999999'.
    Condition: I need only materials from plant "0910" from the /bic/zmat table.
    So I need a routine where the values from flatfile should look for the corresponding values in the table /bic/zmat and populate the same values which are available in the table /bic/zmat.
    Thanks in advance

    Hi Dubbu,
    Try This way.
    Types: begin of ty_zmat,
                Material type 0material,
                All required fields,
                End of ty_zmat.
    Data: it_zmat type standard table of ty_zmat,
             wa_zmat type standard table of ty_zmat,
        conc_material type 0material.
    select 0MATERIAL, reqiired fieldsfrom /BIC/ZMAT into table it_zmat where WERKS = u20180910u2019.
    Loop at source_package adssigning <source_fields>.
    Read table it_zmat into wa_zmat with key material = <source_fields>-material.
                              OR
    { here if u want to concatenate flatfile material with something and look into /BIC/ZMAT, u can do here, say conc_material, it depends on ur requirement}
    Concatenate HBL <source_fields>-material into conc_material.
    Read table it_zmat into wa_zmat with key material = <source_fields>-conc_material.
    If sy-subrc = 0.
    <source_fields>-fld1 = wa_zmat-fld.
    <source_fields>-fld2 = wa_zmat-fld.
    Endif.
    Endloop.
    OR post ur req clrearly...
    Reg.
    Zak.

  • How to knw the Transfer rules of Infosource 80PUR_O01?

    In AWP,
    In Metadata Repository,
    Taking an example,
    "<b>Vendor Evalution-0PUR_C02</b>" Infocube we get Update rules at the bottom of the page,
    from Update rules page, in the bottom of tht page we get Infosource,
    Now in this Infosource page we get <b>'Transfer Rules'.</b>
    this is the normal procedure i suppose to find <b>'Transfer Rules'</b>.
    Similarly im trying out for <b>"Purchasing Order Qty Service Level-0PUR_C07"</b>,
    but im not able to get the 'Transfer Rules for ths Cube.
    Please let me know the Procedure, how to find out Transfer rules for this <b>"PO Qty Service level"</b> Infocube................?
    Regards,
    Sourav

    the best place to search the content objects is HELP.SAP.COM
    InfoSources
    2LIS_02_ITM Purchasing Data (Document Item Level) as of 2.0B
    2LIS_02_SCN Allocation Schedule Line with Confirmation
    2LIS_02_CGR Allocation Confirmation with Goods Receipt
    2LIS_02_SGR Allocation Schedule Line with Goods Receipt
    http://help.sap.com/saphelp_bw33/helpdata/en/c4/1478c35bda7b4cb5224251c84ffaa2/frameset.htm

  • Unable to collect Update/Transfer rules Info & Data sources from BI content

    Hi,
    We are tyring to activate Infoprovider 0PY_CO2 from BI content by selecting the option - In data before. BI is unable to collect all corresponding objects such as Update rules, Info source, transfer rules and the data source for the selected Infoprovider. Only Info area and associated info objects are being collected for the installation.
    We are experiencing same problem whilst acitvating most of the info providers. However, in some cases, either of these objects get activated but not all the necessary objects that feed data to the Infoprovider (cube or multi provider).
    Also, Infopackages and Info object catalogs are not being collected for any objects activated/installed so fare from the BI content.
    We are trying to activate BW 3.5 content on the BI 7.0 environment. BI Content release is 703 and support pack level is 008.
    Kindly share any pointers to troubleshoot this probelm please.
    Thanks
    Venkat

    Shiv,
    For some Info providers, all associated info objects(including transfer & update rules and info source and data sources) are getting collected and got successfuly installed. But this is true for only 10% of the Info providers that we have installed so far.
    Remaining all the objects, we are unable to proceed further.
    Thanks
    Venkat.

  • Transfer Rules missing in Business Content (704 lvl 1) for CMS

    Hi SDN,
    We are currently on BI 7.0, and using Business Content 704 level 1.  When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
    Has anyone encountered this issue?  I have  been referencing notes 1171293, and 1179880
    Thanks,
    Brendon

    hi,
    If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
    Regards,
    Shiva.

  • Content for 0REFX_3 transfer rules missing.

    Hi folks
    We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
    Inorder to get that we have implemented SAP note
    BW transfer rules missing in delivery
    SAP Note Number: 1246385 
    And we installed  BI_CONT 704 SAPK-70401INBICONT  New support pack for BI content.
    It leads to weird changes in the system like previously available objects in BI content are missing.
    Did any body encountered same problem.

    Hi,
    We are having the same problem - no transfer rules for  0REFX_C03.
    Currently on BI_CONT 735 Level 003.
    Did this problem get resolved?
    Any help greatly appreciated.

  • Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

    Hi,
    I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
    We are at BI Cont 7.03, patch 8.
    There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
    Does anyone have a solution for this?
    Thanks!
    Kathleen

    Hi Kathleen Cooke ,
    I am having similar issue now, can you please let me know if you know the solution for the below problem..
    I am trying to activate the Business Content for BW Statistics, but the datasource and the  Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
    I am on
    BI_CONT 703, level 0005, Support Package SAPKIBIIP5
    SAP_BW 700, level 0012, Support Package SAPKW70012
    Thank You,
    Varun.

  • 0SD_C03 transfer rule and update rules do not exist in BI Content

    I am working on SAP BI 7.0 support level 16 and BI Content 703 support level 9.
    I am not finding these objects in BI Content for the Sales Overview Infocube  0SD_C03:
    Update Rules do not exist for 2LIS_11_VAKON,
    2LIS_11_VASCL, 2LIS_11_VASTH, 2LIS_11_VASTI, 2LIS_11_V_SCL,
    2LIS_11_V_SSL, 2LIS_12_VCSCL, 2LIS_13_VDKON.
    Transfer rule does not exist for
    2LIS_13_VDITM, but exists for all other DS.
    7 Transformations exist only for:
    2LIS_13_VDITM
    Can somone help me out with why this is so? Which datasources are to be used for 0SD_C03, 3.x or 7?
    This is an urgent requirement.
    Regards,
    Sony

    Most of the problem has gotten solved by our upgrading to BI Content level 17.
    The others, i made a direct mapping of some of the transfer rules manually.
    It is working fine now.
    Thanks for the replies.
    Sony

  • Transfer rules are missing for selected source system in BI content

    Hi All!
    The problem is: in BI content (Release 704, level 0003, SP SAPK-70403INBICONT) when I select needed source system (for example, A) only I can not find any transfer rules (0RPM area, 3.X transfer rules). When I select more than 1 source system (B, C..), I can see lot of different transfer rules for 0RPM area, but with assignment to another systems (B, C..). How can I get in Business Content transfer rules for data sources from needed source system (A)? Any help appreciated!
    Regards, Iryna.

    Hi Rathy!
    Thank you very much for your quick help! Usually I do the same. Now I faced with BI system, where data source were already activated in system A and replicated. I can see all needed active sata source un BI already. But I can not see transfer rules in content!
    What you can advise?
    Reagrds, Iryna.

  • If you write routine in transfer rules what will happen

    If you write routine in transfer rules what will happen?

    Hi,
    If we write routines in Transfer Rules:
    If it is Start Routine: Record Level Transformation
    If it is at Rules: Field Level Transformation
    In both case, the transformations are activated before the data entering into BW.
    Hope this Information helps u..........
    Assigning points is the way of saying THANKS in SDN
    Regards
    Ramakrishna Kamurthy

  • Routine in transfer rules

    I am using the datasrource 0MM_PUR_VE_01,if the score for Evaluation
    Criteria or the score for subcriterion is Zero then this datasource is
    not picking those particular records
    Vendor    Eval.Crite      Subcriterion score   Score for Subcrit Eval. Crit
    1              Price01           Price Level 01               87
                    Quality02        Line/Stock 02               87
                                          Vendor Audit 03             0
                                          Delivery03 On-Time
                    Delivery01                                           87
                                          Quantity Reliability02      0
                                          Shipping Instructions03
    can be checked with t-code me61
    If the score of the Evaluation criteria or score of subcriterion is 0 the datasource 0MM_PUR_VE_01 is not picking that particular record
    in the above example Datarsc not picking the records of subcriterion Vendor Audit 03, Quantity Reliability02,
    actually this data is coming from table ELBP so whenever the score is zero even tha table is not storing that particular record
    I will have 5 evaluation criterion like Price,Quality,Delivery,Service,Service & the subcriterions for these also are fixed
    so i BW transfer rules I have to write a code in such a way that if the particular record is missing then it shouls treat it as score 0
    Ex:-\
    Eval criter          Score
    Price                  10
    Quality                20
    Delivery               0
    Service                10
    Service                 20
    Now my table wont store the record Delivery as the score is 0
    As my evaluation criteria ar e fixed in the update rules I need thelogic that if particular record is missing then it should show it as 0
    If my requiremnt is not clear pls let me knoe
    as this has to be solved very urgently
    Thanks
    Maya

    Hi,
    If you want it to write in Transfer Rule
    assumption that you have permant/contract in transfer rule as per <b>"  can see the attribute permanent/contract in the transfer rules as it is the attribute"</b>
    and
    Permanant--"p'
    Con--'C"
    Try this code in Employee number
    DATA: ZEMP TYPE TRANSFER_STRUCTURE-/BIC/ZEMPNumber.
    zemp = TRan_structure-/bic/zempNUmber.
    if TRan_structure-/bic/zpercon = 'P'.
    concatenate '7' Zemp to ZEMP.
    else
    concatenate '8' zemp to zemp.
    endif.
    RESULT = zemp.
    Yes to can read from Master Data table.
    you can write code in Start routine in Update rule.
    check out this...
    Re: Start Rou
    Regards,
    San!

  • Dump when activating transfer rules

    Hi All,
                 I am trying to create transfer rules and activate from a DB connect source system and I am getting the following error when activating.
    Runtime Errors         ASSERTION_FAILED
    Short text                                                                               
    The ASSERT condition was violated.                                                                               
    What happened?                                                                               
    In the running application program, the ASSERT statement recognized a                        
        situation that should not have occurred.                                                     
        The runtime error was triggered for one of these reasons:                                    
        - For the checkpoint group specified with the ASSERT statement, the                          
          activation mode is set to "abort".                                                         
        - Via a system variant, the activation mode is globally set to "abort"                       
          for checkpoint groups in this system.                                                      
        - The activation mode is set to "abort" on program level.                                    
        - The ASSERT statement is not assigned to any checkpoint group.                              
    Can somebody help me with this error?
    Thank you.

    BI User
    Please check the OSS Notes 914998 and 791549 and see these notes helps
    Thnaks
    Sat

  • Failure while activating the transfer rules

    Hi,
    While activating the transfer rules, in that process when the system is trying to activating the transfer structure an error is occuring.
    Following is the error log.
    FREELISTS 004
    FREELIST GROUPS 01)
    PARTITION BY RANGE (PARTNO)
    PARTITION "/BIC/B00077630000000000002" VALUES LESS THAN
    (0000000002))
    ORA-00604: error occurred at recursive SQL level 1 ORA-01654: unable to extend index SYS.I_CON1 by 1
    DDL time(___1): .......167 milliseconds
    The SQL statement was not executed
    Table /BIC/B0007763000 (Error adjusting the database)
    Table /BIC/B0007763000 was not activated
    Obj_act >>(___1): ..00:00:01 hh:mm:ss
    Following is the log from System Log(SM21) for the same
    BY2 Database error 604 at EXE
    BY0 > ORA-00604: error occurred at recursive SQL level 1#ORA-01654
    BY0 > unable to extend index SYS.I_CON1 by 1065 in tablespace SYST
    BY2 Database error 604 at EXE
    Every time when I try to activate the transfer rules, it generates a new table "/BIC/B000xxxxxxx".
    Let me know if any more details required.
    Though there is a SAP Notes(513758) with Symptom which is same as our problem, its of not much use. It only says search for other SAP Notes with KeyWords from error log. We couldn't find a relavant SAP Notes sofar.
    Please guide us in resolving the issue.

    Hi Aswani,
    To further prevent this from occuring, you should assign a BASIS person to monitor the BW system using tcode <b>DB02</b> and watch out for critical objects prior loading process. That way, this error could have been prevented.
    You can also device a way to predict which table spaces are needed to adjusted on a scheduled basis based on your actual data growth.
    --Jkyle

  • Not getting transfer rules for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL

    Hello Bi experts,
    Actually i am implementing standard Purchasing module in BI system.
    While implementing , i have installed cube 0PUR_C04 with data flow before options.
    After installation , i am not getting transfer rule for 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL .
    I am getting transfer rule for 2LIS_02_S011 only.
    0PUR_c04 contains these 4 dataspurces - 2LIS_02_HDR , 2LIS_02_ITM and 2LIS_02_SCL , 2LIS_02_S011 .
    So how can i get these transfer rule. and if we want to implement std Purchasing module in BI , which Cubes are required or necessary.
    In metadata repository also , for Cube 0PUR_c04 , it does not showing transfer rule HDR/ITM/SCL. there also it is now showing transfer rules.
    I will be also very thankful if anybody just give me overview of purchasing.
    Thanks,
    Sada.

    Hello Mani,
    Thanks a lot.you are the first one who has answered my que. which i expect .
    Look at following floe in infoprovider in my system. and please tell me what exactly i should do?
    Cube->Purchasing Groups                                                                                0PUR_C04
               Update Rule->0PUR_C04 2LIS_02_HDR                                                                       AY0XVMCJPXXXXXXXXXXXXXXXX
                                    Infosource->Purchasing Data (Document Header Level) as of 2.0B      2LIS_02_HDR
               Update Rule->0PUR_C04 2LIS_02_ITM                                                                         4YSO2PF9XXXXXXXXXXXXXXXXX
                                     INfosource->Purchasing Data (Document Item Level) as of 2.0B          2LIS_02_ITM
               Update Rule->0PUR_C04 2LIS_02_S011                                                                      CSB3FHGQXXXXXXXXXXXXXXXXX
                                     Infosurce->Purchasing groups                                                               2LIS_02_S011
                                                      Transfer Rule->from 2LIS_02_S011 for SC4 Client 600        2LIS_02_S011                  SCXCLNTXXX
                                                                             Datasource->Purchasing groups                    2LIS_02_S011
               Update Rule->0PUR_C04 2LIS_02_SCL                                                                        4ZZ0DMZXXXXXXXXXXXXXXXXXX
                                     Infosource->Pur.Data (Document Schedule Line Level)                         2LIS_02_SCL
    Mani i am expecting answer from you.
    Thanks,
    Sada

  • 0CO_PC_PCP_10 System not Proposing Transfer Rules

    Hi All,
    I want to install and get the transfer rules for this 0CO_PC_PCP_10 data source but when I activate the data source it is not proosing content transfer rules also when I checked in BI content I am not able to see any tranfer rules for this data source.
    Also  when I check in RSA3 extractor is throwing error without any error details.
    My BI content version is 703 level 5
    and SAP BW version is 700 level 20
    I think it might be due to content version.
    Please suggest what coulld be the problem.
    Thanks
    Mayank.

    Thanks for you answer, but the problem is not on the bw, but on the ECC. The field quantities is using the data definition from menge in the function module. Menge is defined as 3 decimals. The problem is that when the function module loop over the levels of the exploded cost estimation the precision of the calculation is getting lower and lower.
    So my question is if there exits a hotfix from SAP to the solution or do SAP provide any other business content datasource with exploded costestimation which do not have the same limitation as 0co_pc_pcp_03.
    BR
    Lars Skafte

Maybe you are looking for

  • Error while saving item proposal

    Hi, When entering Valid  FROM and VALID TO date,I am entering today's date, but still showing an error: "08/04/2009 is in the past" How to resolve that. Please help. Thank you Brian

  • Qmaster compressor and wmv

    Hello, I have constructed a qmaster cluster with two 8 core mac pros. The cluster was manually configured using Qadministrator. One Mac Pro is the cluster controller with services and one is just services for the node. When I submit batches to the cl

  • Can I pick up if I'm not Primary acct holder?

    I'm buying the new iphone 4 on release day and would like to pre-order and pick up at the Apple store. However, I thought that my phone was eligible for upgrade, but it's not- my husband's is the primary line so his phone is up. He doesn't care to ge

  • Has anyone ever interfaced CRM with mBlox (SMS messaging) ?

    I would be pleased to talk with you or better still receive a sort of schematic of how the process would work. Blue

  • Safari quit for good!

    I'm having the same problem should I start a new thread or can someone help me from here. My dd and ds were playing a game from Nick jr.... the game could get full screen and it quit safari and and now safari won't start it just bounces once in the d