Pick List - Planned Orders in Repetitive Manufacturing

Hi All,
Business Process: Cut Planned orders ( No production line, No Routing, No Work Centers). Production done and then these Planned Orders are backflushed.
Any of you have any idea on how to generate pick list to stage material for these planned orders?
I know that Production orders can easily be configured to print automatic pick lists but not planned orders. I have been working my heart out to find a solution but couldnot.
Thanks in advance!
Siva

Hi Siva,
I think action control should work good for your scenario,
In customizing SPRO->Production->MRP->Planning->Procurement Proposals->Planned orders->Action for Planned orders--->Define action control.
Define Action Control
In this workstep, you define the actions that are allowed for the action control function and the sequence in which the system is to carry out the actions. An action can be followed by several other actions and it can also be preceded by several actions.
Activities
Define the action control. To do this, define a key and the actions that are allowed and which subsequent actions can follow certain actions.
Example
The key 01 is defined. The following actions are to be allowed for this key
BOME (explode BOM)
NEMA (check material availability without BOM explosion)
PRNT (print component list)
The BOM must always be exploded first. The material availability can only be carried out once the BOM has been exploded. Once the availability check has been carried out, the system should print the component list. The table is then mainatained as follows:
Control Action Target action
01 BOME
01 BOME NEMA
01 NEMA PRNT
The action control what is defined needs to be assigned in Material Master MRP4 View under REM section.
Hope this helps...Reward your points,
Regards,
Prasobh

Similar Messages

Order type for planned order in repetitive manufacturing

hi
In repetitive manufaturing there is no prodcutiion order
planned order only. so i want know what is order type for repetitive manufacturing
In configuration order type for reptitive is required or not if yes then how will define order type ,where
In Discrete order type will define to control prodution order
like that i want know details about order type in repetive manufature
ravikumar

HI
Planned order in REM is of PE type thar s non convertible in PO and also these planned orders are assigned to PVs thru Planning table and the Confirmation is done agianst these planned orders.
check these links:
Re: order type in repetitive manufacturing
http://www.sapfunctional.com/PP/REM/page1.htm
Regards
Anupam Sharma

Production Order in Repetitive Manufacturing

Hi All,
We are using REM scenarios. But we need to use the Production order for some material in the same plant where we are already using REM.
Is it possible to use both Discrete and REM for the same material but at different periods? Using Discrete for some period and switching over to REM. Is there is anyway to use the above mentioned scenario.
Kindly suggest.
Regards,
Sureshbabu G.

Hi,
As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
Regards
Chandra

Evaluation Structure for Production Order and Repetitive Manufacturing

Dear PP friends,
I am trying to create a Evaluation Structure with reference to an Evaluation Structure (t-code MCR7). I need to join the Standard Evaluation Structures S021 (Production Order) and S026 (Material Usage), but S021 is not appearing to choose characteristics and key figures.
Does anyone have suggestions?
My requirement is to create a report where I can see goods receipt x goods issues per order.
Thanks in advance.
Marcos

Hi,
As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
Regards
Chandra

Materials consumption per Planned order in Repetitve manufacturing

Hi all
I would like to know if there is a standard way of knowing the quantities that have been consumed for a particular component in planned orders when working with Repetitive manufacturing.
Thanks a lot

Dear Area Operaciones,
It is not possible to fetch the planned order number either in MF12 or else in MCRP report.
It is the standard SAP behaviour and you can only get the component's consumption details along with quantity alone in
MCRP/MCRO report and not with respect to planned order no.
Regards
Mangalraj.S

Picking List by Order Type

Hi Experts,
I would like to ask how to get a report of Picking List search by Order Type.
As what i can see in TC VL06P no option are given to search by Order Type.
Would much appericiate if you could share your knowlegde with me how to get it done.
Regards,
Sherry

I should establish credit limit check for sales orders by order type
Check in OVAD and OVA8
thanks
G. Lakshmipathi

Wrong production version picked for planned order in ecc after CIF

Dear experts,
I am new to apo and was working on Cif of transactional data to ecc after planning run in Apo.
we have active integration model and all the master data cifed in apo.
we are cifing ppds ppm which is converted into snp ppm.
The scenario is:
We have a product FG100 at Loc1. For this product we have five alternate PPM's in APO.
When we do SNP planning run, for some planned order it picked alternate 4 or 5 as source of supply. Which is alright.
The problem is when we see the same planned order in ECC it shows source of supply as alternate 1. i.e. planned order in apo with alternate 4 and planned order in ecc with alternate 1.
Is this the expected behaviour, or there is some configuration setting for this. We want that it shows the same source of supply in ecc as in SNP planned order.
Best regards,
AKS

Hi Vikas/Nandkumar,
thanks for the response, in my case the issue is that I have got two production versions in ECC. One production version is used for planning in CTM while the other version should not be considered in APO CTM for planning.
The productionj version which I am not using for planning, I can manually attach the version in ECC to the planned order and the planned order should get CIFed to APO with the source of supply and resource details.
Vikas after executing the report also the source of supply is not getting displayed in the planned order.
Is their a solution by which i can achieve the above results.
Thanks,
Sanjog

Cancading Pick List - Display Order

Hello All,
I have a 3 level cascading picklist defined in my applicaiton. Is there a way to control the order in which the level 2 and level 3 picklist values are displayed to the user ?
On another note, my client is asking if there is a way we pick level 3 directly and CRM will populate level 2 and level 1. Do I need to defined reverse cascading pick list for this ?
Thanks

Robin,
You can either use a workflow or post default to update the values of the other picklist in case you do not want to select them manually.
Thanks,
Mayank

Manual creation of planned order in REM

Hi,
Can we manually create a planned order in repetitive manufacturing? I know that in case we run MRP , then planned order for finished is created with order type 'PE' due to which it cannot be converted to production order.
I dont want to run MRP , still can i create a planned order manually with the same order type 'PE' ? I tried in MD11, but not getting option to chose PE as it is not available in F4 of planned order profile.
Please help..
Regards.

Dear,
You cannot create a planned order with PE order type manually, because a planned order of REM related material gets order type "PE" only when it is assigned with a Production Version.
So achieve manual creation of REM Planned order with PE type with the following options,
I - Using MD11 transaction create a planned order with LA type and assign a suitable REM related Production version to the planned order during creation itself, now this order would automatically become "PE" order type on saving the order.
2. In the planning table using MF50, you can directly create a planned order for a production line using F7 key.
Regards,
Prasobh

Mass T-code Of Planned Order Deletion

Dear All
Is there any mass T-code For Deletion of bulk planned order. An PIR.
Rgds
Pankaj Agarwal

Hi,
You can use function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
Features
SAP supplies the function module MD_SET_ACTION_PLAF for action control.
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Confirm planned order (in repetitive manufacturing)
Firm planned order data
Firm planned order components
Print component overview
This is in the foll link...
http://help.sap.com/saphelp_470/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Use T.code md75 to delete PIR.
Regards,
Senthilkumar SD

Planned order scheduling mass update

Hello all,
Is there a way I can change the scheduling dates for the planned orders collectively. (not MD16) ?
Thankyou

Hi,
check the following
Mass Changes of Planned Orders (Action Control)
Use
You can use this function to execute one or more actions for a large number of planned orders simultaneously. This is possible both within the SAP System and over an interface from an external assembly control system.
Features
SAP supplies the function module MD_SET_ACTION_PLAF for action control.
This function module includes the following actions:
Explode BOM
Explode BOM, check availability
Check availability, only explode BOM in the case of a requirement
Check availability, do not explode BOM
Reset availability
Change planned order data
Schedule planned order
Delete planned order
Confirm planned order (in repetitive manufacturing)
Firm planned order data
Firm planned order components
Print component overview
In connection with an action, you can always change planned order data, for example; order quantity, dates or production version.
The function module also enables you to program further customer-specific actions.
You can execute the actions for several planned orders simultaneously.
You can create action chains, that means, have the system execute several actions in a single operation.
Activities
Define your own actions and program a report that includes these actions. As an example of this, the transaction MDAC Execute action for planned order (MRP ® Planned order ® Execute action) is available.
In this example action, you can use actions only for individual planned orders. Nor can you form action chains, only simple action transitions are possible.
Determine an action key and action controls in Customizing for MRP in the IMG activities Define action key and Define action control. An action key describes the actions that can be executed for a planned order. Action controls determine which actions are allowed and in which sequence they are to be executed.
Assign the key for the respective action control to the materials in the material master (MRP 4 view).
Regards,
nandha

Repetitive manufacturing - Planned order

Hello,
I have got a list of 'firmed' planned orders of repetitve manufacturing. How to unfirm those planned orders in mass?
Regards.

Dear Mangal,
I re-checked in the system & MD19 does not have option to go by planned orders. Further the options which exist are for single entry.
However I wont say that the BAPI is the only solution, as the need in the initial query just states there are many firmed planned orders. It does not provide further details, so if its just for a single material or MRP cont. etc then MD19 should suffice.
But if the planned orders are for different materials, then user has to do multiple MD19's or if the effort justifies the business need, then develop a Z program.
Regards,
Vivek

Deletion of firmed Planned orders

Hi,
I want to delete the firmed planned orders & Purchase Requisitions for Multiple plants,(Not using MRP Run) so can any one advise me if there is any SAP standard transaction or Program available.
I have tried using MD19, but here we can pick firmed Planned orders only w.r.t Material or MRP contriller, we can not select Planned orders of whole plant (or) for Multiple plants.
Please let me know if required any further information.
regards,
PR

Hi,
Not sure if CO41 can meet this need. If you select the lines & click on delete it is just removed from the list & not from the database. However if there is any new functionality added to CO41 for deletion would be glad to know.
However for mass deletion of planned orders you can do this via a Z program using Bapi - BAPI_PLANNEDORDER_DELETE & for Purchase Requisitions use BAPI_REQUISITION_DELETE along with BAPI_TRANSACTION_COMMIT. Provide your specifications to your abaper & it should be possible.
Regards,
Vivek

User exit in planned Orders

Hello all.
I have been search for a user exit in planned orders that allow me to define some code in it to triger some changes. this user exit should be at time of planned order is saved.
I have already search in this forum and I found out how to find the user exits by transaction. I have tried for transaction MD12 but did not found any suitable user exit.
Does any one know any user exit that could make my life easiser
thanks
Manuel Antonio

You can try the following BAdIs:
You can use the Business Add-In (BAdI) MD_PLDORD_CHANGE to change, before posting, data from planned orders, which have been created, changed, or deleted as a result of planning a material or manual processing.
The Business Add-In allows you to fill and change fields from planned orders in the PLAF table. It also supports filling of customer-specific fields in the customer include CI_PLAFDB.
You can execute the Business Add-In in the planning run in the following areas:
Material requirements planning
Master production planning
Long-term planning
You can also carry out the Business Add-In in all applications, which execute manual planned order changes. Examples of this kind of application are:
The dialog transactions for creating and changing planned orders (MD11, MD12, MS11, MS12)
The Business Application Programming Interfaces (BAPI) for creating and changing planned orders
all applications that explicitly or implicitly create or change planned orders, for example the planning table of repetitive manufacturing, repetitive manufacturing confirmation, capacity planning, assembly order processing and so on.
Requirements
When planning a material or manually processing a planned order, you must change individual fields in the planned order or provide entries for customer-specific enhancements of the planned order structure.
Standard settings
The Business Add-In is not active in the standard.
The Business Add-In cannot be used multiple times.
The Business Add-In is not filter dependent.
Activities
To activate the Business Add-In, you must create an active implementation. To do this, choose the following path in the SAP Menu: Tools -> ABAP Workbench -> Utilities -> Business Add-Ins -> Implementation
For more information about this procedure, see the SAP Library under
Basis Components -> ABAP Workbench -> Changing the SAP Standard -> Business Add-Ins -> Implementing Business Add-Ins.
Further notes
Documentation on the BAdI method CHANGE_BEFORE_SAVE_MRP
Documentation on the BAdI method CHANGE_BEFORE_SAVE_MAN
You can also call the documentation on the BAdI method via the menu, by carrying out the following steps:
1. Choose the tab page Interface.
2. Double-click on the relevant method.
3. Click on the right mouse button and choose Component documentation.
Update Planned Orders (MD_PLDORD_POST)
Use
Application components: PP-MRP, PP-MP-MPS, PP-MP-LTP, PP-REM
Function group: M61P, M61U
You can use the Business Add-In (BAdI) MD_PLDORD_POST to further process data from planned orders, which have been created, changed or deleted through the planning of a material or as a result of manual processing.
The Business Add-In allows you to publish the created and changed data from planned orders and can be used to update customer-specific tables or to connect to information systems and workflows.
You cannot use the methods of the Business Add-In to change the planned orders themselves. The planned orders are always posted in the communicated form.
You can execute the Business Add-In in the planning run of the following areas:
Material requirements planning (PP-MRP)
Master production planning (PP-MP-MPS)
Long-term planning (PP-MP-LTP)
You can also execute the Business Add-In in all applications, which carry out manual planned order changes, for example:
The dialog transactions for creating and changing planned orders (MD11, MD12, MS11, MS12)
The Business Application Programming Interfaces (BAPI) for creating and changing planned orders ( PlannedOrder Create, PlannedOrder Change)
All applications that explicitly or implicitly create and change planned orders, for example the planning table of repetitive manufacturing, repetitive manufacturing confirmation, capacity planning, assembly order processing, and so on.
Standard settings
The Business Add-In is not active in the standard.
The Business Add-In can be used multiple times.
The Business Add-In is not filter dependent.
Activities
To activate the Business Add-In, you must create an active implementation. To do this, choose the following path in the SAP Menu: Tools -> ABAP Workbench -> Utilities -> Business Add-Ins -> Implementation
For more information about this procedure, see the SAP Library under
Basis Components -> ABAP Workbench -> Changing the SAP Standard -> Business Add-Ins -> Implementing Business Add-Ins.
Note that the Business Add-In can be used multiple times and therefore all active implementations are called and run through.
Example
The following is a possible use for the methods of this Business Add-In:
When planning a material or manually processing planned orders, you want to log the changes made to the planned orders or the triggered subsequent functions.
The subsequent processing of certain planned orders or individual data from the planned orders occurs in an external planning system. In this case, you can log the corresponding changes to these planned orders in a user-defined table during planning. Using a separate report, you can select the data from the log table and process it further.
Further notes
Methods
Update Planned Orders: Requirements Planning - POST_AFTER_SAVE_MRP
Update Planned Orders: Manual Processing - POST_AFTER_SAVE_MAN
You can also call the documentation on the BAdI method via the menu, by carrying out the following steps:
1. Choose the tab page Interface.
2. Double-click on the relevant method.
3. Click on the right mouse button and choose Component documentation.
Regards
Ram

Planned Order Report for WBS

Hi expert,
Is there any standard report to list planned order for one WBS ?
Thanks and Regards
Shubin

Hi Balachandar，
Thanks a lot for your support, I would like to have report which could be export to Excel. By MD16, we see there are more than 50 pages, we could not export to Excel easily.
Thanks and Regards
Shubin

Pick List - Planned Orders in Repetitive Manufacturing

Similar Messages

Maybe you are looking for