Question regarding MSCS post upgrade.
We currently have ECC 5.0 ABAP only system (NO JAVA) running in MSCS environment. ( Windows-SQL server)
Currently we have Two nodes such as Node 1 and Node 2. At a given time we have all resources running either on Node 1 or Node 2.
Now, we have completed upgrade of above ECC 5.0 to ECC 6.0 ( again we do not have Java in ECC 6.0 ).
Asper upgrade guide Page # 141 Section 6.2 some post-upgrade activities are necessary for an MSCS configuration, for this follow OSS note 941092.
After reading these notes and as per OSS note 941092 / 1011190 / 919046 we have to install
1)"ASCS" instance and
2) Enqueue Replication server
3) Additional ABAP dialog instance on other node.
We will not be adding JAVA in future OR we do not want JAVA isntance at all.
So, my question is do we really have to do above step 1 , 2 & 3?
Can we leave system after upgrade as it is? i.e not to install ASCS and enqueue replication.
What is the necessity to install ASCS?
in earlier version
Central Instance = Message Server + Enqueue server + disp+work
in newer version
ASCS = Message Server + Enqueue server (only)
you need to install CI (disp + work) + Enqueue Replication server in main node and DI (disp + work) + Enqueue Replication Server in additional node
from my understanding only ASCS and DB Instance are clustered
for example in my recent project
BEFORE UPGRADE
NODE 1 : CI Active + (DB INSTANCE passive)
NODE 2 : DB INSTANCE Active + (CI Passive)
AFTER UPGRADE
NODE 1 : ASCS (Active) + (DB INSTANCE passive) + ENQ Replication Server (Active) + Central Instance (Active)
NODE 2 : DB INSTANCE (Active) + ASCS (Passive) + ENQ Replication Server (Active) + Dialog Instance (Active)
Dialog Instance is optional but please do remember without Dialog instance, once your CI down, you dont have Application Server
Dialog Instance can be installed in additional node (node 2 in example above) or you can install in separate server
all this information you can read from Upgrade Guide and SAP Notes
Similar Messages
-
License questions regarding CUCM/CUC upgrade from 9.1.2 to 10.5.2
Hi All,
I am set to upgrade CUCM/CUC cluster and have read the upgrade guides multiple times, just need some input from folks who've actuall done and survived the ordeal.
I have already installed a stand-alone PLM 10.5 and just need an idea what to expect with license migration once the CUCM/CUC has hurdled through the upgrade.
After CUCM/CUC has upgraded to 10.5, can I run the migrate license utility via e-fulfillment and UC instance license will automatically/electronically update its license. And if so, how long does this process take.
Or do I need to send a request to cisco licensing support via the generated request form from migrate licenses tool. Also how long does this process take.
Thanks in advanceHi,
are u using standalone or co-resident ELM.Just refer the link
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/10_5_1/releasenotes/CUCM_BK_P64D2D8C_00_plm-rn-1051/CUCM_BK_P64D2D8C_00_plm-rn-1051_chapter_00.html
For a standalone Enterprise License Manager deployment, use the Prime License Manager ISO:
To upgrade to Cisco Prime License Manager Release 10.5(1), use the following ISO file: CiscoPrimeLM_64bitLnx_10.5.1.XXXXX-XX.sgn.iso.
Where: X represents the specific branch and build number.
For a co-resident Enterprise License Manager deployment, Enterprise License Manager is upgraded to Cisco Prime License Manager along with your Unified Communications product upgrade.
You can upgrade a standalone Enterprise License Manager Release 9.1(2) deployment to a standalone Cisco Prime License Manager Release 10.x deployment.
For co-resident deployments, you can upgrade Enterprise License Manager Release 9.1 to Cisco Prime License Manager Release 10.x with Release 10.x of a Unified Communications application (Cisco Unity Connection or Cisco Unified Communications Manager) upgrade.
regds,
aman -
HI All,
We have recently done the Upgrade from BW 3.1 to BI 7.0
There is a issue regarding the POST Upgrade
One Job is failing every day
The name of the JOB is BI_WRITE_PROT_TO_APPLLOG
And the Job log is
06/18/2008 00:04:55 Job started 00 516 S
06/18/2008 00:04:55 Logon of user PALAPSJ in client 200 failed when starting a step 00 560 A
06/18/2008 00:04:55 Job cancelled
00 518 A
This Job is actually running the program
RSBATCH_WRITE_PROT_TO_APPLLOG
when i try to run this program with my user id its working
but with the other user id which it is schedule its failing giving the messages as mentioned in the job log
Kindly suggest me
REgards
janardhan KMaybe it's a dialog and no system or background user. so the job fails.
Regards,
Juergen -
Questions on previous Yosemite upgrade posts
I had the following questions on previous Yoemite upgrade posts:
1. how do you acquire and make a bootable thumb drive installer?
2. how do you boot the system in safe mode?
3. what applications and versions of these are Yosemite compatible?
4. if an upgrade is required how do you get it? I realize that this will be application dependent?
Thanks.I would go with Niel's suggestion for question 1 as the program will do all the work for you.
Bootable USB Flash Drive – Diskmaker X
Safe Mode - About
Safe Mode - Yosemite -
Hi All,
Since we installed 10g grid control in window 2003 server the oms and agent have been upgraded to 10.2.0.5 see below:
D:\Oracle\Ora10g_GC\agent10g\BIN>emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : D:\Oracle\Ora10g_GC\agent10g
Agent binaries : D:\Oracle\Ora10g_GC\agent10g
Agent Process ID : 2460
Agent is Running but Not Ready
The repository db (in the same server) stayed in 10.1.0.4 so we were trying to upgrade this db. The following is the step we did:
1) installed oracle 10.2.0.1 in a new oracle home.
2) Configured listener from this new database using port 1522
3) Ran pre upgrade util: utlu102i.sql
4) Ran dbua from new oracle home
Looks like the upgrade is successfully run except EM configurations.
Step Name Log File Name Status
Pre Upgrade PreUpgrade.log Successful
Oracle Server Oracle_Server.log Successful
Oracle Workspace Manager Oracle_Server.log Successful
Post Upgrade PostUpgrade.log Successful*
Enterprise Manager Configuration emConfigUpgrade.log Failed*
Generate Summary generateSummary.log Successful
My questions are:
1) What does this failure mean?
2) How can I fix it?
Thank you so much for your help in advance,
ShirleyThank you very much, Werner, for your response.
We don't have a file called "emConfigUpgrade.log" in the server. Under %ORACLE_HOME%\cfgtoollogs\dbua there is file called "emConfig.log" which has the following content:
Jun 12, 2009 12:17:37 PM oracle.sysman.emcp.EMConfig perform
SEVERE: EM is not configured for this database. No EM-specific actions can be performed.
Refer to the log file at D:\Oracle\Ora10g_GC\OraDB102\cfgtoollogs/dbua\emrep\upgrade\emConfig.log for more details.
Jun 12, 2009 12:17:37 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: EM is not configured for this database. No EM-specific actions can be performed.
at oracle.sysman.emcp.EMDBPreConfig.checkUpgradeParams(EMDBPreConfig.java:1741)
at oracle.sysman.emcp.EMDBPreConfig.checkParameters(EMDBPreConfig.java:1037)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:174)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:160)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:141)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at oracle.sysman.assistants.util.em.EMConfigStep.executeImpl(EMConfigStep.java:138)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.BasicStep.callStep(BasicStep.java:251)
at oracle.sysman.assistants.dbma.backend.EMConfigStep.executeStepImpl(EMConfigStep.java:101)
at oracle.sysman.assistants.dbma.backend.SummarizableStep.executeImpl(SummarizableStep.java:174)
at oracle.sysman.assistants.util.step.BasicStep.execute(BasicStep.java:210)
at oracle.sysman.assistants.util.step.Step.execute(Step.java:140)
at oracle.sysman.assistants.util.step.StepContext$ModeRunner.run(StepContext.java:2468)
at java.lang.Thread.run(Thread.java:534)
Does this mean I don't need to configure the EM?
I have another question:
Since repository is now in a new home and the new listener is also use a different port the targets.xml file under agent home is not correct any more. So I used "agentca -d -f" to recreat targets.xml file. After it finishes I looked inside the targets.xml file it still use old repository home and old port number. Do I need to do anything before run agentca?
Thanks a lot for your help,
Shirley -
Questions regarding upgrade from 4th gen to 5th gen iPod
I recently received a new 80 gig 5th gen iPod and had 2 questions regarding it and my old 40 gig 4th gen. PC meets minimun requirements and is running XP Pro.
1) Do I need to do anything before synching the new 5th gen iPod with my existing Library (i.e. uninstall iPod Updater for 4th gen)?
2) If I don't need to uninstall the 4th gen Updater, can I run both iPods off the same Library, same user (obviously not simultaneously)?
tia - joggy
N/A Windows XP ProHey, joggy!
1) No, I don't believe you do. Be sure to disconnect the 4th gen iPod before connecting the 5th generation iPod to the computer.
2) Yes, you can.
There are basically two methods with managing muleiple iPods on one computer:
Method 1 - Create different Windows users accounts for each resgistered iPod on this computer.
Method 2 - Create a playlist in iTunes for each iPod.
To make Method 2 work, connect one of your iPods, and click on it in the left-source panel.
Under the "Music" tab, and set your option for a specific playlist(s) under the "Sync Music" option.
Do the same with your other iPod; not connected at the same time, though.
For more details on this matter, check out Apple's Support article about it:
How to manage multiple iPods using one computer
I hope that helps you.
-Kylene -
BW upgrade - pre and post upgrade reports
Hi All
Quick question please.
We plan to upgrade our BW ABAP system from NW 731 SPS7 to NW 740 SPS6.
I read the ASU toolbox note 1000009 and can see that there is no file for our scenario i..e from 73X to 740 so note 1734333 is the way to go here when prompted for ASU toolbox run. However within the note 1734333, it states "This note requires that all pre-requisites for the BW-related system copy automation are met according to note 1707321". When i read 1707321 it talks about installation procedure for PCA which is part of LVM, a licensed software. We don't have this license. Hence I am wondering if note 1707321 is applicable for us at all or is it that this note would bring about changes in the system and sets up a staging area upon which the Z report from the other note(1734333) builds and then creates task list for pre and post upgrade. I am certain that we will have to implement Z report from note 1734333 however the reference to note 1707321 has created some confusion.
Also once we implement the Z report from 1734333, the note says, the report needs not be transferred but the objects generated need to be. Would the author here referring to reports - SAP_BW_BEFORE UPGRADE and SAP_BW_AFTER UPGRADE and having them recorded into a transport. Any thoughts here please. If the author is indeed referring to these reports only, how do we know this will show up in quality systems via STC01 as input options.
Regards
KalyanI re-read the note again, It says, If task manager content notes(1707321) are not applied, we will not see reports for stopping RDA Daemons and Process chains i...e report RS_SYSTEM_SHUTDOWN. However we are on NW 731 SP7 so we already have this report. This means we can go ahead with implementing the Z report from 1734333 and forget about the other note. Have I comprehended it correctly
Regards
Kalyan -
We're currently in our upgrade project. I have a concern about our transport system after upgrading to ECC 5.0. Here is my scenario. We are currently upgrading from 4.6C to ECC 5.0. All systems are central installations no app servers. Production server consist of PRD. Second server contains DEV and QA. The transport directory is shared between these server.
Upgrade landscape is on another server containing a Dev 5.0 and QA 5.0 system. Our go live plan is to upgrade PRD after testing on QA 5.0. I will manually add post upgrade transports to PRD and then import. My question is, will I run into any problems by manually adding the transports to PRD?
Yes, I know 6.0 is the better upgrade version but it's a long story.
Thank you in advance.Hi Martin,
What do you mean by post upgrade transport if it is SPDD & SPAU fixes then for this you will get option during the upgrade to add a single transport request.
If you are talking @ the development happening into DEV & QA system during the production system upgrade the you just need to keep track of the transport sequance and need to import in a same sequance in the PRD after the upgrade
Hope this will help you, do revert if you need any more info.
Best Regards,
Sachin. -
Post Upgrade Activity: db6_update_db script
Hi Experts,
I've already upgraded db2 version from 9.1 to 9.7 but I am stuck in post upgrade activity where I need to run the db6_update_db script.
Question to this procedure: "Copy the file db6_update_db.bat (Windows) from the relevant operating system folder on the database DVD to a temporary directory (<temp_dir>)."
Is the <temp_dir> can be any directory? If not, what specific directory that I need to save the db6_update_db script?
I've tried to create a directory and save the script but when I issue the command I've got this error:
JAVA could not be found on the maschine
Please make sure that the DB2PATH environment variable is set to the installation directory of the DB2 software or set DB6_UPDATE_DB_JAVA to the full qualified path of your java.exe
I've tried this with different access like administrator, db2<dbsid> and <sapsid>adm but I have no luck.
Can anyone help me?
Regards,
ChonalynHi Chonalyn,
Have a look at this note:
1304436 - DB6: Documentation for db6_update_db scripts
Regards,
Hugo -
Objects for RSRV Check Post Upgrade
Hi,
Could be a Trivial Question for some - Nevertheless.....
What would be an Exhaustive list of various types of Objects to be tested for Consistency using RSRV post Upgrade ?
Please throw some "Expert" Light ...
Regards
ShwetaIn our case we apply upgrades to Sand Box.
We created few reports and prepared test script before and after upgrade.
We prepared our own document.
But this is what the guideline we did.
Regards,
Bashir Awan -
Pertaining Watches thread in Post Upgrade Problems Forum
I have posted a question pertaining the watches, I'm not able to see the red indicator nor receiving e-mail.
Justin, sorry for the very late reply.
I didn't see your reply and now the threads are read only, so I had no other choice but to post here.
The threads I watch I am able to see them in the "Watches" in my Control Panel but I do not see the red indicator and I do not receive watches e-mail.
Thanks in Advance for your help.
Regards,
TonyThe watch e-mails have stopped since the first couple of days of the upgrade, back than I thought they were off, so I waited, but noticed no one was talking about it.
I checked my mailbox today and I saw a whole bunch of watch mails, some from Sunday 23 November and dated way back till 27 October, but none for this thread. It's weird, there are watch-mails for some threads and not for others.
Have you guys uploaded anything??
I haven't change the mail address from the control panel, at least not after the upgrade, but I might have edited that profile page to make sure of my handle, there were cases where the e-mail address was showing instead of the handle at post upgrade.
However I would want to change the e-mail where I receive the watch mails as soon as they start working.
oh! one more thing, I still don't see the red indicators for watches on thread list in the forums.
Thanks for your help guys, really appreciate it.
Tony -
ASU-process POST Upgrade Step on SQL database
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
VinayHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Upgrade step ASU-process post upgrade step
Hi All,
To check this message in the right format kindly click on reply first then click on quote original icon ("").
I am performing an upgrade from R/3 4.7 to ERP 6.0 SR3, while doing upgrade sapup asking me To perform the manual application specific post upgrade step.
This phase says to run ASU toolbox by using tx /n/asu/upgrade. when i run this tx is show the below list of steps to be performed with showing severity level of some as optional and many as obligatory.
Task List Severity SAP R/3 release frm SAP R/3 release to
IS-OIL Application Test 600 Optional
KP06xx: Termination SYNTAX_ERROR Obligatory 470 500
CGPL: Entries are blank after upgrade Obligatory
Error handling of task group execution Optional
Mobile device cannot confirm TO after release upgrade Obligatory 470 600
Mobile device doesn't find transfer orders after upgrade Obligatory 470 600
Grantee Management - Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Convert customizing for warehouse funds ctr scenarios Optional
Various problems classification commitment items (class type Obligatory
Unauthorized error messages udring fiscal year change/reassi Obligatory
RFFMUDX1 migrates incomplete budgeting tables Obligatory
Non-7bit-ASCII character used for BCS key figures Obligatory
Changes in TKEDR for /ISDFPS/RFFMDISTDERIVALE Obligatory
BCS - Tool for Deleting Obsolete Derivation Strategies Obligatory
BCS Syntax Error on Upgrade from EA-PS 2.00 to ECC 600 Obligatory
Migration to ERP 6.0 (EA-PS 6.00) Obligatory
Migration EA-PS 2.00 to ERP 5.0 (EA-PS 5.00) Obligatory
Missing initialization of new fields in table ANLZ Obligatory 46C 470
Activating VMC for the Internet Pricing and Configurator Obligatory
Customer specific BSEG-fields not transferred Optional
Conversion of report headers in drilldown-reporting Optional 600
IBase: Upgrade to Release 4.6C and higher Optional 46C 600
ZSAPRCKML_COGS: Upgrade to release 4.7 or higher Optional 46C 470
Conversion of CO-Total-Tables Obligatory 46C 500
Conversion of CO-line-item table COEP Obligatory 46C 600
New General Ledger, problems in CO-documents Obligatory 500
No receivers found in allocations Obligatory 46C 470
Conversion Of New Process Parameter Long Texts For Search Optional 110 600
Migration of process parameters in recipe management Optional 110 600
FAQ new depreciation calculation Optional 600
Upgrading to SAP R/3 47x200 and SAP ECC 500 with RMGMT Obligatory 100 500
Reloading Table T512W Optional
Converting Short Texts Obligatory
Migrating Data Optional 4.7
Activating SAP ECC Extensions Optional
I am not sure about which steps I have to perform, I am a bit confused.. because some are optional and some are not relevant to my release (as target or source release is different from mine). and also few things are not applied in my envirnoment hence those steps are also not relevant.
Please suggest me, how to proceed and what to do. please guide if i skip this step now and later on I apply latest SP than still I need to do all this.
Regards
Vinay
Edited by: Vinay Paul on Sep 11, 2009 10:11 PMHi All,
I also faced a similar issue during upgrade. Some useful findings.
1. Only super user can access this /n/ASU/START
2. All the obligatory executable tasks are automatically performed by the system automatically during upgrade. SAPADM. Only errors (if any) are to be corrected.
3. Some of the tasks are only to go through some SAP notes as a precaution before upgrade.
4. Execute all the checks /n/ASU/UPGRADE
5. This surely can be skipped, but not advisable.
regards,
Amit -
Question regarding ONT connection via Ethernet and Cable cards
Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps. -
EJB references post upgrade from 8.1 to 10.3
Hi,
I have an application.xml file in META-INF directory of the EAR file. It has the below reference:
<module>
<ejb>content.jar</ejb>
</module>
<module>
<ejb>content_repo.jar</ejb>
</module>
<module>
<ejb>netuix.jar</ejb>
</module>
<module>
<ejb>p13n_ejb.jar</ejb>
</module>
<module>
<ejb>prefs.jar</ejb>
</module>
<module>
<ejb>wps.jar</ejb>
</module>
Post upgrade I accidentally packaged an EAR without above references in application.xml and without actual jars in the EAR file. The application seemed to be running fine, did not test it completely though. Do we really need these jar files? I had upgraded this application from 8.1 to 10.3 using upgrade tool in workshop. This is a portal based web application. Also, what is the purpose of these libraries? Could these be automatically added by the upgrade tool to the weblogic.xml.Hi Srini,
it supports but you need to upgrade correctly.
follow this link
Beehive Applications
after upgrade if you found some error like classnotfound error.
If those are the errors you were also experiencing, then please follow one of these options to resolve this issue:OPTION
1:Identify all the JARs that contain the beehive classes and explicitly add the jar files to the classpathOPTION
2:When you created the domain (if you used the Config Wizard), do you make it a "Workshop" domain? If not, try that.That should deploy the Workshop framework (Beehive controls, NETUI, etc) libraries as shared libraries. Then these libraries should be referenced in your applications weblogic.xml and weblogic-application.xml.
regards,
Kal
Maybe you are looking for
-
Error while creating financial application
i have installed hyperion 11.1.1.4 on windows server 2008 R2, with sql server 2005 as my database server. when i login into workspace and tried to create the HFM appication iam getting the following error. hyp:19000/hfm/GlobalWorkspaceNav/bpm/modules
-
Export a Full Quality QuickTime Movie for CD
Hello - I have an 11 min. movie, that contains mostly pics, but also some video - I will be giving it to someone to play on there computer, which will also project onto a screen, during a wedding reception. She just wants to be able to load it into h
-
HT4483 All my purchased app are not shown under "Purchase" in Mac App Store
Hi, All my purchased app's are not shown under "Purchase" in the Mac App Store window. I have changed computer and need to re-install some of my purchased apps on my new computer but cannot find them. Please advice
-
ThinkPad T530 - 3 External monitors
Hi, I don't manage to get the third external screen working on my pc. I manage to have two external screen and my laptop screen, however, I want to have all three external screen to work simulatenusly, and the laptop closed in the docking station. Do
-
My ipod touch is disabled and it says to connect to itunes but itunes says it can't sync because it is locked. Any way to unlock and keep data? (apps, gaming levels, music).