Rate Routings Partial Costing

Need the help of this forum please.  We are a discreet manufacturing firm with specific operations for our products.  In many cases, we will perform an operation only a portion of the time, say 10% or 15%.  I'm trying to find a way to have the cost of these operations represented in the standard cost based on their prorated frequency.  I thought cost relevency was the ticket, but that didn't work, and in searching this forum for solutions, determined it truly was not the answer.
is the answer in the control key for the operation?  At present, the control keys we have available are either cost yes, or cost no.  In other words, cost at 100% , or cost at 0%.  Do I need to have a custom control key created?  If this isn't the proper approach, then is there another?
Thanks,
Roy

only 10 % will go through operation 5, that means, the time taken to test 10 PC is say 10 hrs. While you confirm the qty of 100, enter the time as 10 hrs instead of 100 hrs, so that you are confirming the correct hrs and then the cost.
Or build the formula as below
You need to have a correct formula in WC. i.e. how the cost is calulated. in nromal way-->
(operation qty* hr/base qty)* USD / hr.
Now you need to have a new variable in the std value to indicate the %.
Hence your costing formula will include the new varibale to calculate the %, i,e new varibale.
Hence new formula is ((operation qty* hr/base qty)* USD / hr.)* new variable)/100.
Hence the cost will get booked accordinly.
Or you can use fornula constants if the qty is always constant irrespective of production qty, and include this in the fcosting formula.
Please try the above and come back

Similar Messages

  • Does Transfer Invoice Price Variance pro-rate for partial quantity ?

    We were planning on using Transfer Invoice Price Variance to Inventory but unfortunately, we find when there's an IPV for quantity that's partly issued - the variance is not pro-rated but entirely applied to the remaining quantity.
    Just wondering if this is desired functionality and if so, could we use SLA to ask the program to pro-rate the variance and for partial quantity, apply the pro-rated amount to the quantity remaining and the rest to the Cost Variance account.
    Thanks,
    Sanjib

    TIPV to Inventory doesn't pro-rate for partial quantity.
    It transfers the entire IPV to the remaining quantity.

  • How can I enter "Flate rates for travel costs" with more than 2 decimals?

    Hi expert,
    I want to enter flat rates for travel costs in table T706F.
    I have a figure with more than 2 decimals (0,066), but I cannot save it, because only 2 decimals are allowed for EUR.
    I don't want to change the decimals for this currency.
    I found OSS note 446116 which is release independent. It is a note of 30.10.2001.
    It suggests to create a new currency e.g. EUR3 and enter translation ratio's and exchange rates.
    This seems pretty drastic.
    Do you know if there is another way to handle this issue?
    Thank you.
    Kind regards,
    Linda Verding

    Hello Christian,
    I have checked it with consultants from SAP Brussels.
    They confirm that OSS note 446116 can be used to create flat rates for travel costs with more than 2 decimals.
    I will create a new currency (EUR3) with the description "for travel expenses only".
    Kind regards,
    Linda Verding

  • Define Flat Rate for Travel Cost based on location (Maximum points awarded)

    Hello,
    SPRO>Financial Accounting>Travel Management>Travel Expenses>Trip Reimbursement Amount>Reimbursement Amount Travel Costs>Define Flat rates for Travel Costs, in this path we can enter the reimbursement amount for trip country/ trip region. I created different reimbursement amounts for different locations(additional locations/regions can be created in table T702o for country US) for USA but in expense report its taking only default amount (0.36) that is already there for Country:US not the amount i gave (0.27) for different location even when I gave the location name in the expense report. Could anyone tell me what i am missing. Do i have create corresponding WT for these expense types based on location.
    Thanks,
    Latha

    got solved

  • Differences between rate routing and reference rate routings?

    Hello PP members:
    I would like to differences between rate routing and reference rate routings
    Thanks for your time,
    Thanks Again,
    Suren R

    Hi Mr.Suren,
    As explained by other friends Routing is used in Discrete manufacturing and Rate routing is used for REM-Repetitive manufacturing.
    In addional to these types SAP has given 2 more types
    1.Reference operation set -Used in Discrete manufacturing.
    2.Reference rate routing - Used in REM.
    If similar rate routing is been used for producing many materials,then instead of entering(these steps) in rate routing of each  material you create a refrence rate routing and you enter the work centres used and the other details.After saving you get a group counter number showing reference rate routing is saved with group XXXXXXXXX.
    When you are creating rate routing for a material say A ,after giving the name and plant details in the top you will be able to see an icon "copy from" and you can select the radio button for reference rate routing and give the group counter number. or else without giving it here you have got an option to select the reference rate routing after entering into the operation screen also.
    In that particular page in operation overview screen,there will be an icon copy,there you can click that icon and you can give the reference rate routing group counter number and very easily you can create rate routing for N number of material.
    Likewise you can use reference operation set while creating routing for a material in Discrete manufacturing.This basically reduces the time in creating routing or rate routing for materials in Discrete & REM respectively
    CA01,CA02,CA03-Create,Change,display (routing)  respectively.
    CA11,CA12,CA13-Create,Change,Display reference operation set Respectively.
    CA21,CA22,CA23-Create,Change,Display rate routing respectively.
    CA31,CA32,CA33-create,change,display reference rate routing resp.
    I hope this will help you.
    If useful reward your points.
    Thanks & regards
    Karthik.

  • Is an update of "Flat rate for travel costs " possible by company code?

    Hi,
    I want to update the reimbursement amount in SPRO in "Flat rate for travel costs "
    I need to select a "Trip provision variant: e.g. Belgian accounting".
    Can it be selected by Company Code as well?
    Thank you for providing your feedback.
    Kind regards,
    Linda

    I close this call.

  • Standard Routings and Rate Routings

    Dear guru.
    Whose are the difference between Standard Routings and Rate Routings ?
    Thanks.

    Hi,
    Ca01 is std Routing
    CA21 is Rate Routing
    The routing lists the operations needed to manufacture a product.
    The rate routing is used in repetitive manufacturing. Repetitive
    manufacturing normally produces in one comparative stable production line,
    and has normally only one production operation.
    With a routing, the base quantity is normally constant and the times
    (such as the processing time) are determined through the standard values.
    With the rate routing, however, it is the other way around.
    The production quantities are maintained separately for each article,
    and the time is constant. In a rate routing, therefore, you can specify
    what quantity of an article is manufactured in a given time using a
    production rate.
    The functions of rate routings and routings are otherwise the same as those of normal routings

  • Automation for actual input of utility rate in Production Cost centers

    Dear All,
    Currently we have a process where we are downloading actual rates through KSII for each location and rates calculated are inputed through KBK6 for all individual production cost centers by activities ,so my requirement is whether there is any procedure where downloading and uploading can be eliminated and actual rates calculated by system directly loads on to the production cost centers.
    Kindly provide any suggestions
    Thanks and Regards
    vijay

    Hi,
    If u run KSII, system will give a message "Do you want to post the results of price calculation?" if u click on YES , it will automatically update  in your KBK6.  Pl. Check once.
    Regards,
    Rajeswari

  • Resource Rate Information for Costing

    In the MS TN article for best practices for submitting and reporting on actual work (http://technet.microsoft.com/en-us/library/hh694531%28v=office.14%29.aspx), the recommended best practice is to report directly against the actual work captured in timesheets.
    The problem with this is the timesheet tables do not have resource cost/rate information. From what we've seen in other TN articles, resource rate table doesn't exist in the reporting database? How then is it possible to base reporting on actual work from
    the timesheet?
    According to MS, it's easy... "While many calculations are made in a project plan, such as cost based on cost rates, these can be easily replicated with timesheet data"
    We could get actual work in the assignments tables, but the actual hours are then changed by EVA calculations and therefore won't match weekly or monthly invoices for receiving.
    What are our options?

    Indeed you're right.
    As far as I remember, the publish DB has the MSP_RESOURCES table which contains a RES_RATE_TABLE column with the rate table UID. Then you'll have to dig into the publish DB to find where is located the rate tables since I don't remember.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Exchange rate in Landed Cost

    Hi Dear;
    in landed Cost, if we enter the costs in a cuurency different than the document currency, always it multiply these cost by the exchange rate. why?
    exp:
         Document currency: USD
         Local cuurency: Eur
         Exchange Rate: 1USD=0.9 Eur
         if i put the Landed cost=100 Eur it changes to 100*0.9=90 USD which is wrong.
    why???
    regards;

    Hi Dany
    it seems an Application Error
    check this SAP Note if it is helpfull  1317291 
    914452
    811680
    Thanks
    Rizz

  • Incorrect exchange rate for Actual cost documents

    Dear all experts,
      I have an actual cost documents which was created on 02.10.2006,it should be taking the value date for currency exchange as 01.09.2006,but it is taking 01.
    04.2006 hence it resulting in picking wrong exchange rate.Any solution to solve it and what is the cause of this issue? Thank You

    hie, the currency is set in the table TCURR. the time rederence ? sorry,I am very new to this.the user just told me to that the currency for actual cost taken wrongly,all i managed to check is tat the value date for currency translation for tat particular actual cost document is 01.04.2006,tat's y it took the wrong exchange rate. And i guess the exchange rate is already updated in BW.

  • Raouting, Rate Routing and Cost run Problem

    We have changed the our process from routing to rate routing.
    But while doing the cost run - CK40N, the sytem is considering the routing in stead of rate routing.
    Please advice.
    Regards
    Pranav

    Dear Pranav,
    1.Check what selection ID has been assigned in the quantity structure control tab(for the costing variant that is used for costing in
    CK40N) for routing selection,If it's 01 means,then check with selection ID 02 where the first priority is assigned for routing type R.
    (In standard SAP selection ID 01 by default has first priority to routing - N and then further prirority to rate routing - type - R).So
    assuming selection ID 01 is assigned and a product has both routing(task list type - N) and rate routing(task list type - R),now at
    the time of costing the system picks up the routing by default as the first priority is set for routing.
    2.Also check whether the task list type and the corresponding group and group counter has been changed in the production
    version for inhouse manufactured product either in MM02-->MRP4 view or else in C223.
    Check and revert back with your further queries.
    Regards
    Mangalraj.S

  • Exchange rate type in costing run.

    Hi all,
    In costing run, we use price from customer info record.
    Info record is in USD and material is in CAD (Canadian dollar).
    During costing run, all the materials are taking exchange rate 'P'. This is correct (as 'P' is maintained in controlling area version)
    But for one material alone exchange rate 'M' is being picked up.
    Could you please share if you have any idea as to where to check and where the problem could have been.
    Thanks in advance.
    Regards,
    DSK

    HI,
    Whats the CO-area currency type? I guess for the case you've mentioned there is no currency conversion possible with ex rate type "P", so ex. rate type "M" is taken as a 2nd best option.
    To check if converison is possible use SE37, function module "convert_to_local_currency", use the "test" button (F8) and key in the data required for currency conversion (type of rate "P").
    Best regards, Christian

  • Freight Rates and Shipping Cost in TPVS

    Freight costing occurs in LES transportation planning system and contains freight rates, agreements etc.  Is the final cost based on pricing procedures and condition techniques?   I would assume shipments are communicated via IDOC structure of freight document?
    Many thanks.
    Michael

    The final cost is based on the pricing procedure and condition techniques. 
    Regards,
    Jim Habermehl

  • Calculate Multiple Activity Rates in One Cost Center

    Hi Everyone,
    We currently have many cost centers allocating expenses (through assessment KSUB) into a few cost centers that calculate activity prices. Furthermore, the cost centers that calculate the rates have a few rates to calculate. So, can anyone tell me how to have the receiving cost center that would calculate 3 separate activity prices based upon secondary cost elements? I understand that when posting primary plan expenses in KP06, you can specify the activity type and cost element combination so that a rate can be calculated based on specific cost elements, but how is that performed on secondary cost elements allocated into a cost center?
    Thanks,
    Pete

    The budgets will be planned on the cost centers using KP06. You dont need any activty here. After doing all the budgets, you will do your assesments making all the postings. Then you will plan you activites on cost centers using KP26. This is planning of activity quantities not the dollar value. So now you have the budget and the activity quantities in the cost cenetrs. You will run the activity price calculation using KSPI in which each costcenter with the activity will divde the budget with quantities and will caluculate the rate per unit. This will be you activity prices. The role of secondary cost element here is it is associtate with activity and this is the link for cost center and activity. So the activity price will assosicated with secondary cost element. When you make any posting with these activites the posintgs will be booked against these activities.
    Assign points if helpful

Maybe you are looking for

  • Share music with another iTunes account

    Getting my wife an I phone,her first I device. I have had an iTunes account for a while and would like to share what I have with her. How can I share content with her iTunes account?

  • Execute owb mapping as a whole instead of giving step by step or skip

    Hi friends, I need a help from you.. Actually i am working with owb 10.2 and db 10.2. I am able to do all the process successfully like debugging, reinitializing and entering the data into the table. The thing is while debugging,i have to give step o

  • Put ipad display to sleep with video out on

    Is there a way to put the iPads display to sleep while using hdmi out? I noticed a slight burn in of the Netflix logo...

  • Wrong date in query analyzer

    hi gurus While executing a query it is also showing the calendar date as 31.12.9999. Qty & value is also under the same date while there is no such date in cube. why is it so.

  • Create Substitution Profit Center when MIRO (invoice)

    Dear all How to create substitution profit center and this the requiredment: When i create invoice MIRO there is tax account 11701105 and i want to substitute profit center in that account, i have create substitution like this, in GGB1 ,>financial ac