Reg: Document Creation in CV01N

HI,
I careted a document thru CV01N TX.... WITH A STORAGE CATOGERY ..AND THE DOC IS SUCCESSFULLY CREATED .
say doc 1001 is created .
Now  I want ot know the TABLE-FIELDNAME ...where the storage cat is stored  for this doc 1001..that is  IF i give doc no as 1001..it should give me storage category .
and  another question is : A doc is in FINAL stautus. Now I want to change the storage catogery ..can we do it,,,, if yes how???
regards
Arjun

check out the file first.
Run CV02N , open the file you want to check-in in different storage category.
Click on the file. Then click on "Change original" button.
R/3 System will save file on your local system.
Now you again use CV02N, you can notice that file is checked out (Open Lock). Right click on the file, chose "Check In As", then select the storage category of your choice from the pop-up.
Thanks

Similar Messages

  • Document creation date DMS

    Hi Folks,
    How do I find out the creation date of a DMS document (CV01N)? Document info structure table DRAW does not have it. I could not find it in any table of CV package.
    /Sagar

    DRAP helped. First entry in DRAP has document creation date.

  • Excise Invoice List-Pending for ARE document creation

    Dear All,
    Is there any standard Tcode for getting the list of excise invoice which are pending for ARE documents creation or with the status of ARE documents.
    Thanks & Regards,
    Antima

    Hi,
    No there is no standard report available for this requirement.  You may need to develop a Z report.
    J1ARE_AGE gives u the status after creation of ARE1.
    Thanks
    Krishna.

  • Document creation

    hi guys,
    i have one requirement. I want to upload thousands of technical manuals in to SAP . So what i did is i made one BDC for document creation and uploaded in the system. Now the problem is the doucments created have status create. By BDC i am not able to change the status to in work and released. Without releaseing the document i am not able to use it in equipment master data.
    Can anyone kow how to do the mass change of documents where i can change the status to release from create. Or any other program for this

    Hi,
    Its simple ask the concerned developer to make a modification in the upload program to open in change and set the document status one by one means opened in change make the status Work Request and save than again open in change set the status In Work then again and so on .... unless the status will become released.
    or
    In customization  set the status directly to released at first step.
    Regards,
    EJ

  • SRM 7.0 PCW. Follow-on document creation

    Dear experts: we are in SRM 7.0 and have implemented PCW with approval at item level. Our end users want to have automatic follow-on document creation inmediatlly after SC item approval. However, as per standard SAP SRM, they have to wait untill all levels for all items have been approved.
    One example will illustrate: A shopping cart with two items. Due to the threshold, item1 requires only one level of approval, while item2 requires two levels. Both items will result in a dfferent purchaisng document in the backend system in a classic scenario: Item1 will result in a PReq, while item2 will result in a Purchase Order.
    Once first level for the two items have been approved, would it be possible to generate the follow-on document for the first item as no further approval for this item is needed is needed?
    Our end users are familiar with Preqs in MM, where item approval process is done at item level and the follow-on document can be created even when the other items in the PReq are not yet approved.
    Thanks in advance for your valuable  help.
    Regards
    Valentí

    Hi,
       No, this is not possible, once all the item in a SC approved, then only system will create a follow-on-documents. As per your scenario , item1 will still wait until item2 gets approved. This is standard.
    Saravanan

  • ECC document creation timing  for mismatch values in ECC and Bw report.

    hi gurus,
    i am extracting data from ECC at 10.pm (ist) and my process chain should start to load data at 2.30 am (ist) then in morning  i am refreshing BW report try to reconcilied from my extracted ECC but i am finding so many mismatsh values. so i want to know that record (document creation time )from BW refresh is after or before Process chain start or after ECC extraction,if this case record posted after ECC so that its showing me mismatch in BW and it will populate in ECC on next day.please tell me step to freeze on which record  come to me on next.
    i hope u undarstand my prob.
    Many thanks
    Ganesh

    got it.

  • How to use Add Shipments functionality in Shipment document creation

    Dear All,
    We wanted to use the Add Shipments functionality in the Shipment document creation / change.
    We have two different shipment types.
    I want to add shipments of one shipment type in to Shipment document of anohter shipment type.
    I am not able to do it now as system is saying in the selection log that the shipment types are not same.
    Please let me know what are the pre requisite configurations to enable us to add shipments in to another shipment.
    Please let me tknow he standard functionality of "Add Shipments option" and how to use it to add shipments in a Shipment
    Regards
    Venkat

    Hi Venkat,
    The option "find shipments" is provided to select the shipments to reassign or deassign the deiveries etc in VT01n or VT02n
    transaction planning screen. Basically you can play around to assign and reassign the deliveries to different shipments
    This option is not creating the shipment within shipment. It is just selection of shipments for planning purposes
    Hope this helps.
    Regards,
    Ramana

  • Need to create a mass upload program for appraisal document creation for multiple employee

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi Priyaranjan,
    I think you can take the abap'ers help in creating the program. But u need to provide them the exact functionality and the required specifications in creating the appraisal document.
    Even tcode also u can get it prepared by Abap'ers.
    Thanks and Regards
    Balaji

  • Need to create a mass upload program for appraisal document creation for multiple employee in abap hr

    Hi Expertise,
    I need to create a mass upload program for appraisal document creation for manager and his multiple employee
    at a time using tcode appcreate.
    Please help me out.
    Best regards,
    Priyaranjan

    Hi,
    I have done appraisal document creation for bulk using txt file.
    this fm used for single for creation in standard tcode (phap_prepare):  'WZ_HRHAP_0DOC_WZ01_START'.
    So create ztcode  usinh this fm for single form then record BDC for this tcode and called this tcode in that bdc for bulk creation .
    While recording for single I have used manual option instead of automatic .

  • Office document creation capabilities of Acrobat XI Pro same as in Acrobat Plus?

    Are the Office document creation capabilities of Acrobat XI Pro the same as the capabilities in Acrobat Plus? Thank you.

    They are the same appllication as far as the Acrobat 11 part that they both include. Acrobat Plus includes the Export PDF service, which should do the same thing that Acrobat can as far as exporting to Office document formats, but it's different software.

  • Controlling document creation on SD invoice creation ( vf01)

    Hi gurus
    How to to activate "Controlling document creation" ( cost center & Cost element ) on invoice creation ( vf01) . ( like accounting document is created on vf01).
    thanks

    Hi BR,Ajay M
    thanks.
    Cost Element : Cost element category 11 is revenue .    and Cost element category = 1  is  "Primary costs/cost-reducing revenues"
    I want to use it in  Freight Discounts to customer.  ( sales Invoice ) ,.   ( i think it should be cost reducing revenue ). plz advise.
    Thanks.

  • REQUIREMENT TO STOP BALANCE SHEET ACCOUNTS FROM ACCEPTING PROJECT AT JOURNAL CREATION OR ANY FINANCIAL DOCUMENT CREATION.

    Dear Gurus,
    I have a requirement from my client to stop balance sheet account from accepting project at financial document creation or journal entry because this process distrupt the profit and loss account report or transaction report by project as balance sheet items are not expected to be part of this report.
    Kindly advise on the way to achieve this to enable fulfill requirement and deliver excellence service.
    Kind regards,

    Hi Nagarajan,
    Thank you for your response.
    My sample is whenever an entry is raised to be posted to a balance sheet account such account should not allow user to post but only in revenue and expense account. E.g. A Stock account should not allow project assignment but a cost of sales, expenses or sales revenue accounts should only accept project assignment.
    Only P&L items should allow project assignments.
    I hope this is clear is enough.
    Regards,

  • Document creation statistic data

    Hi,
    I've been task to create report that will show some kind of statistic about document creation, by date, username etc in our ERP system. First thing I came up with is to pull documents header data and count them in query designer.
    I know i need data from EKKO and VBAK tables for purchasing and sales, any other?
    Also if you have any better suggestion ...?
    Regards,
    Mijodrag

    So you mean to say that you need to create a report which will give you the count of creation date based on different type of orders.
    You have only considered--Purchase orders and sales orders..How about Production orders and Planning orders.
    Please think about them as well.
    Regards,
    AL

  • Document version in CV01N

    Hello experts,
    Is it possible control the value of the field Document Version in CV01N. SAP maintain the last value used in this transaction, I would like to have this filed empty in every CV01N execution. Is it possible??
    Thanks in advance.
    Laura

    Hi Toshit,
    I was inactive for few days, Please let me know if you  resolved this or still pending.
    Thanks,
    Rabi

  • Sales order, Delivery and Billing document creation

    Hello Experts,
    I am working on credit management and am in need of creating sales order, delivery and billing document.
    Can some one send me the screen shots or any doc which outlines order,delivery and billing document creation.
    Will award points definitely.
    Also what are the t.codes for these creation?
    Regards,
    Sriram

    Order Create:
    Transaction VA01
    Give the order type , If standard order use OR or ZOR, which ever is maintained
    Then give the sold to and press enter
    In the Items screen Give the material and quantity and press enter. This should be enough to create an order, if u need u can give order reasons...etc. Then save the Order. Note down the order number.
    Go to VL01N-
    and give the above order for which u are doing delivery, In the pick quantity enter the amount in the order and press enter. and make sure the delievry date should be the same in the Sales Order Schedule line- REquested delivery date. Save the document.Note down the document number
    Go to VL02N - Open the above delivery document and click on PGI - done
    Now go to VF01 and this should bring up the delivery document number., If it doesnt , give the delivery document number and hit enter. then save the document. Billing is done.
    Regards
    Sai

Maybe you are looking for