Restriction of movement types at storage Location

Hi Gurus ,
My client requires that  no user should be able to use movement type 261 and 262 from 2 out of 5 storage location of a plant .
please let me know how can we achieve this.
Regards
Abhi

Hi Abhi,
             create 2 different roles
1) in the first role give him the Authorization for a Storage Location A and B, and give him all the Authorization for rest of the Mvt Types Except 261 and 262
2) In second Role Give  Full Authorization for the Storage Locations C, D and E.
Use the above given Objects and fields.
NO FS and NO Approvals Required in the same.
else it will be going to be a long and complex methord using BADI and User Exit,
and in future you will always have to depend on the Programmer.
This will work for your Scenario.
Regards,
Yawar Khan
Edited by: 1234_abcd on Oct 3, 2011 1:40 PM

Similar Messages

  • Restricting Authorization for movement types for Storage Location

    Hi Xperts
    I have a requirement that 313 & 315 material movements should not have any BBD/SLED check.However , 314 & 316 should have BBD/SLED check.
    Suppose there are two storage locations : A(Good Stock) & B(Blocked Stock).
    I want one User-ID should be authorized to perform 313 & 315 from A to B.However the same USER-ID should not be authorized to perform 313 & 315 from B to A.They should be authorized only to perform 314 & 316 from B to A.
    All the above trasnactions will be performed either via MIGO or via MB1B.
    How to achieve this.Pls suggest.
    Regards,
    Soumick

    Hi Soumick,
    You can try by creating 2 roles as given below.
    Role A - Tcode Migo
    BWART - 313 and 315
    for object M_MSEG_LGO field LGORT - give only A
    Role B - Tcode Migo
    BWART - 314 and 316
    for object M_MSEG_LGO field LGORT - give only B
    Try assigning both the roles to user and see... Not 100% sure...but u can try out.... You need to have such scenarios tested very thoroughly.
    With Regards
    Nishad Showkath

  • Material Type Movement type and Storage location Authorization Object

    Dear All,
    My client wants that  certain type of material i.e. SFG should not be GR Mvt. type 101 at the FG storage location, they want to restrict to some  user ID .
    Is there any authorization object or the enhancement to control all three parameter to restrict to particular USER ID?
    Thanks in advance.
    regards
    ALOK Shrivastava

    Hi,
            Please check as follows.
            IMG > Material Management > Inv. management and Physical Inventory  > Authorization Management
                   > Authorization Check for Storage Locations (Indicator on)
    Regards,
        Gaito

  • Can i restrict a movement type with respect to storage location

    Hi
    Is there any way to restrict the movement type for a particular storage locations.
    For eg.
    If am using a Mvt 311 tP btwn storagelocations.
    If there are 10 Stlocs in my plant i want to restrict 311 only for 7Slocs.
    Is it possible
    Guide me
    Sunil

    Sunil
    Please contact your BASIS security team , with the help of Authorization roles you can restrict
    Reward if helpful
    Regards
    venu gopal

  • Restriction on movement type,storage location on USER ID

    Dear Guru's,
    I have to restrict movement type 311 on some storage location for some user ID.Following is already done but not able to restrict the movement of material on other storage location rather than defined:
    1) Maintained authorization objet M_MSEG_LGO with two storage location ST01,ST02 and movement type 311.
    2) Using BADI MB_MIGO_BADI and maintained Z table with USERID,Mvt type 311,storage location ST01,ST02.
    Still we are able to do Mvt 311 on other that defined locations in authorization objet M_MSEG_LGO and Z table....
    Kindly give ur valuable suggestion to resolve the issue......
    With Regards.

    HI
    For your requirement only I have suggested to create multiple role. In one Role you specify SLOC & MOvt type(only 311) in auth object M_MSEG_LGO & M_MSEG_BWE for slocs where you want 311 movt. In other Roles of goods movt you also specify other SLOCs & all other movt except 311. I mean in the other Role you cant keep the movt type as * in auth object M_MSEG_BWE.
    So its a combination of SLOC & MVT tye. Try & give feedback
    Shakti
    Edited by: SHAKTI BEHERA on Jan 14, 2012 12:15 PM

  • Restriction for Movement type 202

    Dear SAP Consultants,
    I want to make the restriction for Movement type 202 by material document.
    The user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
    Kindly give me the details for incorporating it .
    Best Regards
    Deepak Rade

    HI,
    202 movement type is the reversal movement type of 201 (goods issue to cost center)
    when we cancel material document with 201 system create reversal posting with 202
    And you can manually enter 202 movement type also in MB1A and MIGO
    Now if you want to restrict user to use 202 directly
    GO to OMJJ -> select movement type 202 ->allowed transaction ->Remove MB1A and MIGO and save
    So you can only cancel a material document of 201 to create 202 not possible to create manually (without reference)
    {IF in future needed you can always add those in OMJJ again}
    You can cancel material document is through T. Code MBST
    This will fully serve your purpose

  • Restriction for Movement type 202 - reference of 201 Movement only

    Dear SAP Consultants,
    I want  to make the restriction for Movement type 202 by material document.
    The  user should only be able to do the 202 Movement type in MB1B with reference of 201 Movement only .
    Kindly give me the details for incorporating it .
    Best Regards
    Deepak Rade

    Hello Deepak,
    This is SAP SNC SDN forum and your query looks like more of the of SAP MM.
    You can post your query in SAP MM SDN forum.
    SAP ERP - Logistics Materials Management (SAP MM)
    Regards,
    Nikhil

  • MB5B Movment type and storage location is reset

    When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Movement Type, I get a Message "Movement Type is reset" and then the entered Movement Type disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Also, When I run the report MB5B with radio button "valuated Stock" active for a specific Plant and Storage Location, I get a Message "Storage Location is reset" and then the entered Storage Location disappears from the selection criteria.
    However the report does not give me this message when the radio button "Storage Location/ Batch Stock" is active.
    Please tell me why does this happen when the radio button "valuated Stock"  is active ?

    Dear All,
    I am facing the problem as said in the thread.
    My two queries are as follows:
    Query 1:  In MB5B report When we select the valuated stock option ,We are unable to use movement type , storage location in the selection criteria nad getting the below messages.
    M7284 - Storage location is reset.
    M7298 - Movement type is reset .
    Query 2 :In MB5B report total receipts and total issues is showing incorrect values.
    Here say for example I prepared the grn, cancelled the grn and again made the grn. Here total receipts is considering in such a way that all the grn quantities are considered. and cancelled documents are considered as issues.
    ie  have received material = 100 Nos 01-12-2009
    cancelled grn:100 Nos
    Redo grn:100 Nos
    Done transfer posting 415 Q = 10 nOS = 02-12-2009
    Issued = 10 nos = 02-12-2009
    In mB5B 01-12-2009 to 02-12-2009
    We are getting Opening stock= 0 which is correct
    Total receipts = 100(GRN IST TIME)+100(GR SECOND TIME) +10(TRANSFER POSTING)=210
    Total issues = 100(CANCEL GRN)10(TRANSFER POSTING)10(GOODS ISSUE) =120
    Closing stock = 90(CORRECT)
    Here actual recipt: should be 100
             actual issue should be 10
    Here though the closing stock is correct , 415 transfer posting is considered as issue and receipt.Becoz of this total issues quantity report is going wrong.
    Please give your valuable suggestions to the above two problems seperately.
    Regards,

  • Set valuation type by storage location

    Is there a way to limit specific valuation types to a storage location?  We have reclaimed materials that we would like to assign to a specific storage location.  For example, we have storage locations 1 through 4 for new materials and storage location 5 for reclaimed.  Is there a way to restrict the receipt of reclaimed materials into storage location 5 only?  We do not want to see any reclaimed materials in storage locations 1 through 4.

    valuation only takes place at plant level, so you cannot restrict it at storage location level with standard customizing, you can only check this in a user exit.

  • How to restrict Stock posting in Specific Storage Location

    We Want to restrict posting of cenvet creadit taken material to specific storage loacation at time of GRN (MVT 105)

    HI
    IMaterial master view in mrp-2 view there is option to procurement for EP. here you specify the storage location so while posting the GR system pick the same sto location.
    which material you want to post just make the changes in mmr.
    creation of user wise authorization  also you can reach this with help of basis.
    laxman

  • Restrictions of movement types in MIGO

    Hello,
    When I select goods receipt in MIGO, I would like the system to avoid using 201 movement type. I mean, if I select goods receipt, it should only work for goods receipt
    Is there a way that I can block other movement types like this?
    I tried to do it from
    SPRO->MATERIALS MANAGEMENT -> INVENTORY MANAGEMENT AND PHYSICAL INVENTORY ->SETTINGS FROM ENJOY TRANSACTIONS -> SETTINGS FOR TRANSACTIONS AND REFERENCE DOCUMENTS
    and tried to put some restrictions, but it did not work.
    Thanks in advance for your help
    Irem

    Hi
    Access to mvt types can be restricted through authorizations. Check with your basis person (auth object is M_MSEG_BWA).
    If you want to skip a particular transaction in MIGO then deactivate it in IMG - MM - Inventory management & phy inventory - Settings for Enjoy Transactions - Settings for Goods Movements (MIGO) - Settings for Transactions and Reference Documents. Select the transaction MIGO - click transaction/event (you can deactivate goods issue here or) - Click goods issue - deactivate which ever are not required. You cannot see deactivated options here in MIGO.
    Thanks

  • Restrict for movement type 201 by material typeu200F

    Dear Gurus,
    Can SAP restrict movement type 201 by material type?
    For example, Can i set authorization for 201 movement type to only material type UNBW material?

    Check this answered links
    Authorization check on movement of material type
    Material Type - Movement Type Link

  • Restricting the movement types...........URGENT ISSUE

    Hi.. Every body,,,
    Actully 'm, a basis consultant , i have problem with mb1b Transaction code..
    Myproblem is
    i have 4 plants 1,2,3,4 now i want to restrict the goods transfer between these plants like
    01---02 -
    accepted
    0201--
    accepted
    0103--
    not accepted
    0104--
    not accepted
    0203--
    not accepted
    0204--
    not accepted
    And 1,2,3,4 plants must transfer goods to vendor
    i'm trying by using movement types 301 for plant to plant transfer and 541 for plant to vendor
    i have created two roles in one i was restricted company code 1 and 2 with movement types 301 and 541
    and in another role i was resricted comany code 3 and 4 with movement type 541 only..
    If i give thes two roles to diffrent users it is working fine, but if i give to same user but it is not working..
    I don't have functional kw......This is an urgent issue.......please suggest how to restrict..

    Hi.........T'X for responding imm....
              But i have tried ,what u said , still same problem...please provide some more inputs...

  • Restricting a movement type

    Hello all,
    i need a solution...is there a way to restrict a material for a movement type...here is the scenario..i want to restrict a material for 261 movement type.Is there a way to restrict a material for that movement type..

    Hi Srisha,
       You can goto transaction "OMJJ".Here you need to put the no. of movement type.
       On the same screen under dialog structure,there is a tab for allowed transaction.You can remove those combinations and you won't be able to use those movement types for any transaction.
      But this is not advisable
       But still if you go ahead with the changes then keep a note of all the transaction so that in future you can revert them back whenever required.
      Basis authorization is another alternative
       Reward points if it works.
    Regards
    Karan
    Message was edited by:
            Karan Bhatia

  • Change MRP type at storage location level

    Morning,
    i am having trouble with PD and ND reporting. Your you are aware ND should only have balances of 0 and PD should only have balances of >0. When i run a reportto show all PD stock and exclude the positive balances, i am getting MM numbers appearing that are 0 in 1 sLoc but have a positive stock balance in another sLoc. This becomes a problem when i change the PD to ND because it changes at plant level. i only want this to be changed at the sLoc with the 0 stock balance.
    I have tried MM06 to flag the MM for deletion at sLoc level however, when running the report again, the sLoc with 0 stock balance still shows.
    Also, i have about 800+ that need changing so a solution to do this in a batch would also be appreciated.
    Please help.
    Paul

    Hi,
         Go to IMG settings 'Materials Management + Consumption-Based Planning + Planning + Define Storage Location MRP per Plant' Enter your Plant, It will show list of storage location in that Plant, then select 2 in 'MRP Indicator' field for storage location for which u want to plan seperately.
    Hope It will clear Your Problem
    Regards
    Sunil Kumar

Maybe you are looking for

  • 256 color in Forms 10g

    I find that there is support for ONLY 256 color in Forms 10g. Is it a limitation and can we use more than 256 colors? I want to enter r92g136b146 in canvas properties background color. It gives me an errror FRM-12305 Please help. Thanks.

  • How to hide values in F4 input help

    Hi firends,                     I have a requirement to hide the values from F4 input help. In tcode F110, when I press F4 in Identification field then i will get the F4 help value for identification for which payment run is already done. I want to h

  • Error Building LW 2010 Distribution Kit

    I get the following error when trying to build my distribution kit on a factory test set PC.  The same kit will build on my work laptop. I have found various posts of similar problems building distributions with LW, LV, Test Stand, etc. but none are

  • Bottom round pad beneath square not updated according to design rules

    I saw this problem with the last couple of sets of boards I ordered so I decided to track it down. It turns out that if you have a throughhole component with a square pad on top and a round pad underneath that the round pad doesn't get updated accord

  • Purchase Order Response workflow.

    Hi Masters of SRM.     My scenario is MM-SUS  version 5.0  the request is started a  Workflow maybe new or standar, in POR confirmation by Vendor when Response has  variance in qty or delivery dates.  I know exist a wf standar but in scenario SRM-SUS