Rolling Back Installation: Elements 10

Does anyone have any fresh ideas how to fix this issue? I've tried every trick in these forums and none of those solutions work. Specifically, I'm trying to install Photoshop Elements 10. I think the problem started when I installed Acrobat and then had Revo uninstall it. It took a lot of my other Adobe products with it. Elements 10 will not install anylonger. Any help would be appreciated.
Thanks,
Brian

Hi brianhood,
As you said that Photoshop Elements rolls back after 90% then could you please try these steps first and afterwards try installing Photoshop.
Please rename the OOBE Folder from this location
Windows:-
C:\Program Files (x86)\Common Files\Adobe
After renaming the OOBE Folder try installing Photoshop Elements first and once finished then download and install the latest version of AAM mentioned in the other forum.
Let us know if this helps.
regards,
Abhijit

Similar Messages

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; I download; I start installer; installation fails unexpectedly; installer rolls back installation; hardware seems PC capable;

Apple declares an Update for My windows 32 bit Vista Home Premium; 3 software updates are available; Safari browser=1, Itunes=2; Apple software updater=3; I download; I start installer; installation fails unexpectedly; installer rolls back installation; PC hardware seems PC capable; I have removed Mobile Me because of New Apple I-cloud Software Sync server registration?
What should I do with this failure to install Apple software products /declaring/ needing wanting to update and failing the process.
I have other software to complete the multimedia experience. what should I do with the constant automatic attempt to update
I can consult Gateway; device drivers web sites; hardware drivers;
Please Email Deanallen@ a*l.com
< Email Edited By Host >

Hi,
Please try this
Stop Windows Update Service and BIT Service now.
Go to C:\Windows\SoftwareDistribution and delete all file under this folder.
Start Windows Update and BIT service now.
Then try to download windows update now.
If doesn't work, please reset the windows update componments
http://support.microsoft.com/kb/971058/en-us
Yolanda Zhu
TechNet Community Support

Acrobat XI it rolls back installation

When trying to install Acrobat XI it rolls back installation and I get this prompt "The wizard was interrupted before adobe acrobat xi pro could be completely installed"

Hi wayneO13,
Please refer the KB: http://helpx.adobe.com/acrobat/kb/acrobat-x-xi-installation-rollback.html
Regards,
Rave

Roll back issues elements 9

Hello,
I have used elements 9 many times, but when I tried to use it today both photoshop elements and all my adobe ver 7 and 9 came up with asking me to accept the license agreement. I did and it would not open any program in adobe except CS2, Acrobat 8 and Adobe reader.
I tried to install ver 9 and it would not or at least it still shows up in windows uninstall, but when you try to uninstall it say the program does not exist.
I tried to install ver 9 and it always rolled back the install. I do have the log file, but I do not understand what it is telling me.
Help would be appreciated.

Hi Larry,
[email protected] wrote:
Yes I tried the ASA and had looked at the second link before and I just don't see where it would lead me. At the end where the summary is it shows no errors, but I don't know if that means no roll back errors or what?
The second link to the Adobe document leads you to looking through the entire installation log for "Return code: 3" listings and how to search the Adobe Knowlege base for clues about that specific error. That's a good question about the error summary -- the body of the log would have more specific details about what is happening in the entire process.
[email protected] wrote:
Do you or another person in the forum have knowledge of what the log is saying.
I haven't used the installation log to troubleshoot problems, so all I can say is what the Adobe document says: the log will show failed installation components so one can do further research on the cause of that component failing.
[email protected] wrote:
I still have PSE 9 and PRE 9 and PRE 7 Templates showing in Control Panel...Programs window, but when you try to remove them it says "This action is only valid for products that are currently installed".
That's the part that bothers me the most, because it suggests a larger system problem. If you've already used the MS Fixit utility:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
and still have those invalid entries, I'm afraid that the system is corrupted and that is what's causing your PSE installation problem.
My approach would be to first get the system problem sorted out, instead of possibly wasting a lot of time in the details of the PSE installation log.
Ken

TS3212 Itunes 10.7 Rolls back installation after attempting to install on Windows Vista 64bit.

I downloaded the version in this link, presumably for Vista 64:
http://support.apple.com/kb/DL1577 . It goes through the process but rolls back the installaion and reports "error in installation". I turned off kaspersky Suite but got the sam emessage. Any ideas?

To clarify, I already have iTunes 10.6. Also, I just checked back on the iTunes installer (the manual one) and it now says: "iTunes Installer Completed
The installer encountered errors before iTuens could be configured.
Errors occurred during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."

Photoshop Elements 10 Rolling Back

As a result of a recent problem with Elements Organiser, I had to uninstall all of Elements 10.
When I now try to install it again, it appears to be installing ok (in that it populates the destination folders and places a launch icon on the desk top etc)
However, before it fully finishes the install, the installer window says something along the lines of "Photoshop Elements 10 Rolling Back Installation". This removes the desktop icon and gradually unpopulates the files from the destination folder.
As recommended on the Adobe Help Page, I have switched off my Firewall (AVG Professional), but the problem still occurs.
I have previously had Elements 10 running ok on this machine.
Any ideas ?
Regards
JJ

Already tried these.
The issue is obviously related to a Failure to Install Shared Technologies.
I've loaded the Adobe Support Installer Analyser, but no joy or no viable solutions.
I can't believe that I have spent money on a product that I cannot use. There appear to be many people on the various forums out there with similar issues.
It should be easy to contact Adobe directly to get clear and unambiguous help on issues such as this.We shouldn't have to rely on well meaning and helpfull forum members for what feels like a breach of consumer rights. If you had a kettle which failed to work correctly after a couple of months, you would want the supplier to resolve the issue, not expect other "kettle users" to suggest a range of alternative solutions !!
Whilst I'm not a PC geek, I'm no slouch either. How on earth would someone with limited PC knowledge cope.
Somewhat Frustrated !!

Element 9 error "Rolling back the installation of Elements 9" failed.??

I just bought Elements 9 for Windows. And anytime I try to download it, it says "Rolling back the installation of Elements 9" then says "shared technologies failed"?
I have tried multiple things listed on here and nothing helps.
Does anyone know how to fix this??
Thanks~!

Hello,
I noticed that there is a log we can refer to:
C:\Windows\CCM\Microsoft.ConfigurationManager.AssetProvider.InstallLog
Since the client software is not installed successfully, I'm not 100% sure if the folder persists.
In addition please check event log. Pay attention to those logs regarding WMI.

Can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this tim

can't reload Photoshop elements 7 on my windows 7 operating system. Everything goes well and it appears to be installing. All of the sudden the Installer starts to roll back everything and error message shows up saying I can't use this product at this time.

How do I do that? I'm the only user on the laptop - I kind of assumed I already was running the install as the admin.

Elements 10 installed, then installation rolled back. Why?

Elements 10 installed, then rolled back. Why?

It could be due to Adobe Bridge running already. I would recommend reviewing Install rollback | Photoshop Elements | Windows - http://helpx.adobe.com/photoshop-elements/kb/install-rollback-photoshop-elements-windows.h tml. Please feel free to respond to this thread if you have any questions regarding the steps listed.

Rolling back problem during installation of photoshop elements 10

I am trying to install photoshop elements 10, however it gets to a certain point each time and starts rolling back the instalation. I have saw on FAQs to turn off my mcafee virus scan temporarily to allow it to install. I have done this but the same problem occurs. Can anyone help?

Hi,
Does it show you the name of the component it is trying to install when it starts rolling back?
Thanks

Am trying to reinstall photoshop elements/premiere elements 9 back on my pc but when it gets to installing shared technologies it freezes and then rolls back.

I don't know what is going on with this. Photoshop worked but the premiere elements suddenly kept freezing so I un installed and am trying to reinstall but keep having the same issue. This is from a purchased dvd set. At one point when it got to this phase, the dvd started making an odd noise then roll back. I try again and again with no odd noise but still the same issue. It's not the pc I've had that remotely checked and other stuff installs. What gives? I NEED this fixed pronto

glenda178
What computer operating system is your Premiere Elements 9.0/9.0.1 running on? For now, for the details below, I will assume Windows 7, 8, or 8.1 64 bit.
You are experiencing the known Shared Technology installation error syndrome which can hit any version of Premiere Elements on any computer operating system. There is no one fix. Lots of home remedies.
The fix that has worked for me consistently lately is this:
Local Disc C
Program Files (x86)
Common Files
Adobe
and in the Adobe Folder is the OOBE Folder. Rename the OOBE Folder from OOBE to OLDOOBE. Close out of there and try for the Premiere Elements 9 installation again. (Do not forget to do the Premiere Elements 9.0.1 Update after you have finished the Premiere Elements 9 installation.)
The following is a sampling of what some others have gone through with this particular error
Re: Premiere Elements 11 "installing Shared Technologies" error during install
Please let us know the outcome. We will think about this some more depending on your results.
Thank you.
ATR

Photoshop Elements/Premiere 9 OEM Bundle not installing. Rolls back at end

I have a toshiba satellite T135 with AMD Turion Neo X2 Dual Core processor L625, 4 GB RAM, ATI Radeon HD 3200 graphics operating on Windows 7 64 bit Home Premium edition.
I am trying to install adobe photoshop elements 9 and adobe premiere elements 9. It gets to the end where it is almost done. Icon on desktop, and then it decides to rollback the installation. I tried many of the suggestions on this forum: copied disc info to folder on c drive. Started with a clean boot. That actually made it worse because it also caused the computer to blue screen.
Here are come windows errors that pop up at the end:
prior to clean boot installation:
Files that help describe the problem:
C:\Users\Sara\AppData\Local\Temp\WERDE2B.tmp.WERInternalMetadata.xml
C:\Users\Sara\AppData\Local\Temp\WERF841.tmp.appcompat.txt
C:\Users\Sara\AppData\Local\Temp\WERFB5D.tmp.WERDataCollectionFailure.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Post clean boot installation:
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7600.2.0.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               1000007e
BCP1:                                                    FFFFFFFFC0000005
BCP2:                                                    FFFFF80002CD3670
BCP3:                                                    FFFFF88002FD37F8
BCP4:                                                    FFFFF88002FD3060
OS Version:                                          6_1_7600
Service Pack:                                       0_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\031611-44912-01.dmp
C:\Users\Sara\AppData\Local\Temp\WER-103569-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\windows\system32\en-US\erofflps.txt
Please help me get this software installed. Frustrating that a legit well known piece of software has so many problems just getting installed.

I am trying to install a new purchased version of PSE 9 and havin the same issues. It simply rolls back when near the end of the installation process.   I am on hold with phone support now, but from the sounds of things here on this forum, Adobe is aware of the issue but has no suggestions to fix it.
This is the first time in my life that I have had issues with installing a new, purchased piece of software.
C'mon Adobe Support, time to answer us on this and get it solved, or perhaps you would offer us refunds?

Reinstall Elements - "Rolling Back Action" Error

I am trying to reinstall Elements 7. I need to do this because I had a system problem and I needed to do a clean new Windows XP install. As a result of the XP reinstall, I have had to reinstall all my programs.
What happens with Elements is that I get to the screen that says "Registering Product" and the system stops, gives me a message that says "rolling back action" and the installation stops.
I called Adobe install help and they were less than useless. They first had me run the Windows Installer Utility followed by the Adobe CS4 Clean Script. Neither program found any problems and they did not help. They then had me set up a new User ID on my computer and told me to log on as the new user. Again - no joy.
I have successfully reinstalled Elements 3, Lightroom 2,5, Photoshop CS2 and Adobe Acrobat without any difficulty.
When I did a WEB search on this problem, the only useful thing that I found was Adobe Service note kb406851 which talks about removing a cache file. I do have that cache file but the note also says that I may have to reenter the serial numbers for my other Adobe programs. I am loath to take this step.
Any suggestions would be appreciated.
DON

This might be happening because of some of the bits of PSE 7 which didnt got removed from the machine while you removed/uninstalled PSE7.
Try following the steps mentioned in the below link and make sure that all the bits have been removed and then try to install PSE7 again.
http://kb2.adobe.com/cps/405/kb405847.html
Regards,
Ankush

Photo Elements 11 fails to load and rolls back when it starts 'installing shared services'

Photoshop Elements 11 fails to load and rolls back as soon as it switches to 'installing shared services'. How can I overcome this? Premier Elements is already loaded and works fine including the Organiser. Photo Elements 10 is still on the system and also works fine.
System - Windows 7 OS1

Hello
I have tried that previously, it didn’t work then and it doesn’t now.
What I have just done is run the installation until it came up with the error message and killed the set-up file & windows installer. Photoshop elements seems to be almost installed. Organiser works for both Premier & Photoshop. What files etc would have been loaded from the point of the error message? The installation worked on a borrowed laptop (on 30 day trial). Hopefully all I need to do is copy the missing files across if you could advise what they are.
Regards
Bryan

Apple Mobile Device Service installation rolls back

Hey there,
I've been having problems installing iTunes 9 or even 8 on my computer. While running the iTunes setup, part of the installation rolls back and when I launch iTunes after that, I get the message saying that
"This iPod cannot be used because the required software is not installed. Run iTunes installer to remove iTunes, then install iTunes again."
However, the installation doesn't work no matter how many times i reinstall it. I've fully uninstalled everything related to apple and used the microsoft's utility to check if they were properly uninstalled before reinstalling itunes, but I still got the same message.
I found out that Apple Mobile Device Service was not installed and that was the problem. When i extracted AppleMobileDeviceService.msi from the iTunes installer and ran it, it rolled back too. So I used the /l*v command to create an installation log and this is the error.
DIFXAPP: INFO: opening HKEY_USERS 'S-1-5-21-4128058654-1677487342-2165978628-1007\Software\Microsoft\Windows\Curr entVersion\DIFxApp\Components\{9AA3828A-F852-11DB-8E29-6C6B55D89593}' (User's SID: 'S-1-5-21-4128058654-1677487342-2165978628-1007') ...
DIFXAPP: INFO: ENTER: DriverPackageInstallW
DIFXAPP: INFO: usbaapl.inf: checking signature with catalog 'C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\USBAAPL.CAT' ...
DIFXAPP: INFO: Driver package 'usbaapl.inf' is WHQL signed.
DIFXAPP: ERROR: Create Driver Store entry failed. (Error code 0x6E: The system cannot open the device or file specified.)
DIFXAPP: INFO: Successfully removed '{9AA3828A-F852-11DB-8E29-6C6B55D89593}' from reference list of driver store entry ''
DIFXAPP: INFO: RETURN: DriverPackageInstallW (0x52)
DIFXAPP: ERROR encountered while installing driver package C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers\usbaapl.inf
DIFXAPP: InstallDriverPackages failed with error 0x52
DIFXAPP: RETURN: InstallDriverPackages() 82 (0x52)
Action ended 17:15:17: InstallFinalize. Return value 3.
Can anyone help me please? Any help will be appreciated =P
Cheers

I have recently been fighting my system to get itunes to recognise my iphone and i ran into a similar problem.
I couldnt uninstall the old version of apple mobile device support, and installing the new itunes over the top did not seem to help either.
But i found a work around.
Try opening the itunes.exe install package with winrar. (www.winrar.com, its a free program) and then extracting only the applemobiledevicesupport.exe file.
Reboot your system, run that file and then reboot again.
It should work.
If it doesnt, then good luck to you :P
-Adam

Rolling Back Installation: Elements 10

Similar Messages

Maybe you are looking for