Task list-Planning plant change

Hi
How to change the<b> <b>Planning plant</b> in the task list</b> ?
Thanks
Seenu

hi seenu
i think it is not possible to change the planning plant once you have assigned for maintenance plan, try to delete all the assignment of the task list and try ( iam not sure)
regards
thyagarajan

Similar Messages

  • "Save Message" - in Task list - Planning 11.1.2.2.302.3

    Hi,
    We have implemented Planning 11.1.2.2.302.3 and following was asked from our customer.
    When I enter data (numbers) in the task list, I want to be warn with a pop up window, if I click "next" that "data are not save" --> - save yes or no-.
    As per today customer goes following steps --> to 1-key inn data, 2-save, 3-click next to continue, work with next step
    Customer wants --> 1-key inn data, 2-click next and get a pop up asking to save, work with next step.
    IS that possible ?
    We are speaking about an administration who has many people keying inn data and the manager's concern is to make it simple to his users.
    Hope I made myself clear. And thks for any support ?
    Best regards,
    Rachid

    It is a default planning behavior.
    If you changed a data cell and move away (select a different form, or select a different page drop down) it'll automatically say that "This form contains unsaved data. Select OK to continue without saving data, or Cancel to discard operation"
    Is that not happening?
    Regards
    Celvin
    http://www.orahyplabs.com
    Please mark the responses as helpful/correct if applicable

  • Work Order - Maintenance Planning plant change

    Hi Gurus,
    Is there any way to change the maintenance planning plant in a created work order? We are having an issue on work orders and we need to tranfer our open work orders to another plants to solved the issue. Please me let me know if this is possible to do in SAP. And let me know how to do it in SAP.
    Thanks in advance,

    Hi,
    The start of the plan is not option as this will surely have an impact. Anyway, work around for this issue was provided and this is OK now. We will continue with the old orders untill such time they will finally be closed. No postings will be created against this old orders and if there's a need to do GR new orders will be created in new plants for the postings.
    Thanks for you help,

  • Task list in Plant Maintenance

    Hello,
    is it possible to have a task list defaulted by order type in PM? I can create a task list in IA07 but I want to default this when creating a maintenance order via IW31.
    Thanks for your help!!

    Hi
    Why do you wants it to be defaulted for all the Orders for an order type.I suppose in your structuring or otherwise you will have different types of equipments and same task list might not be applicable for all.
    Further why dont you use the option of Direct Entry from the menu while creating the Order.In this case you have the flexibility also.
    I suppose there are no other standard ways than to use the User exit mentioned.
    Regards,
    Manish

  • Task list creation in plant maintenance.

    Hi All,
    I have the function module /ISDFPS/TASKLIST_CREATE which was used in my program under one more Z function module, we have a XI integration also here earlier we were using service pack SP10 so this program was working fine as integration with other interfaces was working fine.Now the client has upgraded to service pack SP14 and so the standard FM got one more parameter T_CUOB which was not mapped because in SP10 it was not available. Pls can anybody suggest me what is this parameter T_CUOB and what is the business significance of it.
    The standard FM was used for creation of a task list in plant maintenance for Functional location, equipment etc.
    Vishnu.

    Hi Vishnu,
    I am just wondering if you got an answer to this question. We are having the same problem, but we do not care what the value is for t_cuob, therefore we need to default it to something like null or blank.
    Thanks

  • Problem using customer-specific task list

    Hi,
    I've created a customer-specific task list zap0 (copy of sap0) and defined additional tasks for the list.
    When using this task list for a change request, I get the message
    Internal Phase Controller Problem
    Message no. /TMWFLOW/TASKLIST176
    The task list has status created, when trying to change the status, I get the message
    INDICATED_CYCLE_NOT_FOUND
    Does anyone know this problem?
    Thanks in advance
    Stephan

    Note 927124 solves the problem ==> thread closed

  • Palm Pre Task List bugs and suggestions

    I'm a new Pre owner, so maybe these things have been addressed.  I haven't found anything though.
    With the latest OS update (1.4.1?), there are a couple of bugs or problems with the task list. 
    When changing the due date for a task, and backing up to the catagory list, the entry no longer resorts correctly.  It stays displayed in the list and shows the previous due date.  Though, if you tap the item details, it shows the updated date was saved correctly. 
    Sorting by date should secondarily sort by priority.  So if I look at today, all of the highs should be at the top, not scattered down on page 2-3.  Need to see the important stuff at a glance. 
    Also, when manually dragging to sort tasks, Entering a new task will reset the sorting so your manual sort is gone.  Manual sorting should be saved.
    Are there workarounds for any of these things?  Is there a better app that will do what I'm looking for already?
    Thanks.

    Thanks for the feedback link.
    As for the bugs, I can reproduce them every time.
    Bug 1: no refreshing:  In the view all tasks list sorting by date, change the date on any item, swipe back to the all tasks list and the change is not registered, and the item stays in it's current location on the list, where it should resort in Date order.  Swipe up to the main page or close the app, reopen and the date shows fine.  Closing and opening causes the date to refresh.
    I created a brand new list, added 2 tasks.  First task I entered with today's date.  Swiped back to the list (not all tasks this time, just the test list), and the date shows.  Entered second task, taped to change date, set date to tomorrow, swiped back to the test list and that date was not showing at all.  Tapped the first task to change the date to tomorrow, swiped back and that date still showed today while the second task still showed no date.
    Note that this was all working fine without the bugs I'm reporting prior to 1.4.11.
    Now, a new problem.  The test catagory I created above was the 7th list.  How do you get to that list on the main list page?  I cannot scroll or find it on the list.  Are there limits to the number of tasks/lists that can be entered?
    Bug2: Manual moving.
    Previously, I hadn't left the list when I reported the problem.  Manual move would be reset if I entered a new task, tapped into details, then swiped back to the list.  However, what you describe also causes the bug.  If I manually move, swipe back up to the mail page, then tap back into the list, my manual change is gone.  Keep in mind this is using "Sort by date" as the default, but I would hope that manual sorting would override that.  Otherwise, what's the point of having both?
    Thanks for your help.  If you cannot reproduce this, should I take it into a store for tech support so it can get reported properly and fixed?

  • Is it possible to change Planning Plant in General Task list

    Hello Gurus,
    Is it possible to change Planning Plant in General Task list, ie. for eg.
    Earlier I have General Task list Group:22, Group Counter:1, with Planning Plant:0001 & now i want to change/update new planning plant 0002 instead of old 0001 in the same task list.
    could you plz suggest me, is it possible? & how to do changes?
    Thanks in Advance.
    Regards,
    Amol

    HI Amol,
    Its not possible to change the Planning plant , You can delete that task list or you can put deletion flag on it, and go for new creation
    Riyaj

  • Plant Maintenance - Linkage between Task List and Maintenance Plan

    Sir,
    In Plant Maintenance, I have an equipment for which there are 9 maintenance activities that have to be performed every year. Out of these 4 activities will be carried out every month. 1 activity will be carried out during the months of February, June and October. 5 activities will be carried out only in the month of December.
    I need to create Task List for all these activities and subsequently create Maintenance Plans for all these Task Lists.
    Can I group all the 4 activites which will be carried out every month into one single Task List, with separate operation nos and time against each activity?. I don't know whether it is correct or not.
    If I use the above method I can create 3 Task Lists for this particular equipment with same Group no and 3 Group Counters.
    How to create Maintenance Plan for the above scenario?.
    Eventhough, 4 activites are carried out every month and they have been grouped into a single Task List (Group counter 1) and if these activites are carried out on different dates within a month how can I create Maintenance Plan and subsequently create a Maintenance Order?.
    I need some help in this regard. A detailed reply will be helpful.
    Can anyone throw some light in this regard.
    Regards,
    R. Vijayakumar

    you need to create one task list with a maintenance strategy with packages and hierarchy to outline the work requirements i.e. some tasks to be carried out 3 monthly some 4 monthly etc, and also if common tasks appear in 3 monthly package vs 4 monthly package then to suppress the duplicating task
    you would then define a strategy based maintenance plan and run it to get the respective maintenance orders

  • Extend task list for new planning plant

    Hi Gurus,
    I have 40 task lists for a planning plant 1000. I want to extend them for a new planning plant 2000. Is there any method to do it without usnig BDC or LSMW?
    Regards,
    VM

    Hello VM,
    No it is not possible to simply extend the Task list.
    You can copy the same for different planning plant. But if it is not so much necessary, Make other as Maintenance Plant rather than Planning plant.
    Regards
    Naveen

  • Task list , Mtc plan staratagy change & Key date weekly plan?

    Dear
    I dont think as a std SAP transactions will allow my below req.
    1. I have created task list mtc stratagy as XXX. but i need to change as YYY.
    2. The same mentioned above for MTc plan
    3. I would like call the Mtc order on key date
    Example Pump has weekly, monthly tasks.
    1. Weekly schdules i need for every month 1st, 8th, 15th,22th no need 29th .
    2. We can call the monthly ops thro Key date . Here if i have mentioned in stratagy as 28 days instead of 30 days it will call?
    Pls any one have the soln
    Thanks
    Thenna

    hi
    i think it is not possible to change the maintenance strategy once assinged to task list,other option just try in the task list select the operation and select the maintenace package ,here delesect all the maintenance package alloted and then try to change it
    regards
    thyagarajan

  • Plant independent general maintenance task list

    Hi, All,
    Can it be possible to create a general maintenance task list without maintenance planning plant & which can be used for all plants in same client?
    This is required to reduce the common task list data per plant existing in the system.
    Regards,
    Sanjay

    Hi Sanjay,
    maintenance Planning plant & Work Centres may differ according to the Centralised & decentralised maintenance.
    Hence not only maintenance planning plant but alos work centres may also needs to changed.
    Logically each work centres planned activity cost may differ so if u create a common task list it will not serve the purpose too.
    Ref link
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/5b/ae33e04b8611d182ba0000e829fbfe/frameset.htm
    Ramesh

  • System not allow to change planning plant

    Hi Experts,
    My problem is I changed company  code , maintenance plant  & planning plant in old system as per client requirement. They are using same system from last 4 years. I changed all require setting in customization but now problem is that in  equipment task list system does not allow to change the planning plant in header data of  IA02 T code. I updated the new planning plant in Function location master,Equipment master , Work center & assign it planner group but even system shows the old planning plant in task list header data. System shows the planning plant data in display mode.
    Pl advice from where system link the planning plant field in task list header data.
    Thx in adavance.
    AVI DDS

    Avi
    Pete is right. There is no way you can change the planning plant in the Task Lists
    Task list creation is done for a planning plant & you will not be able to use the existing tasklist for your updated equipments having different PPlants.
    The only way to proceed is to create new tasklists
    Delete the old assignments of the tasklists to the maintenance item & reassign the new tasklists to the existing items
    In case you dont want the tasklists in the system itself, you will have to delete the tasklists - ie mark the deletion indicator in the change mode & archive the TLs.
    Regards
    Kartik

  • Changing Maintenance plant to Planning Plant

    Dear Experts,
    We have requirement like this.
    Now under 1000 Planning Plant , 1001,1002 are maintained as matainance plant.
    Now we have planned to change 1001plant as Planning plant, means accordingly we have changed the configuration.
    Now are transporting the changes to PRD, So here before importing to PRD what are all the activities has to be considered.
    As per my knowledge
    1] We have to close the all the maintenance order, Notifications, Service orders has to be closed.
    2] To change the Planning plant from 1000 to 1001 for all the equipments and functional location.
    Apart from above mentioned activity, if any further steps need to be carried out please suggest.
    Regards
    DON

    Hi,
    You have to change BOM, Task list, maintenance plans, authorisations etc.
    Where ever there is planing plant assignment exists there and all.
    Regards,
    NNR

  • Plant maintenance - Default value for task list

    Dear All ,
    I am new to the forum, Can any one throw some light on where do I do customizing settings , so that I will get a pop up window asking to change workcentre while I assign a Task list to an order.
    Sorry if this is a silly question.
    Thanks in advance

    Hi,
    You can define this at the following IMG path:
    >Plant maintenance & customer service -Maintenance & service Processing -Maintenance and service orders -Functions and settings for order types -Default value for task list data and profile assignment                                                                               
    It is also possible for each user to maintain their own settings. This can be done using the following menu:                                                                               
    Transaction IW31/32: Extras   > Settings   > Default values
    -Paul

Maybe you are looking for