Unable to connect HP PC or Macbook Pro wirelessly to Laser jet pro P1102w

I got a new HP computer & am not able to connect wirelessly to the printer. I also lost the printer connection to my Macbook pro and when I deleted it, cannot find it to reinstall. The network light blinks but wont stay on. When I was just having problems with it staying online, I noticed the network name was wrong. Everything has been rebooted over & over. I cant get it to do anything!

Hey @jgabby5,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the wireless connection issues you're experiencing with your HP Laserjet Pro P1102w Printer on your Windows and Mac computers. Because your network light on the printer is blinking it does indicate that your product is not on your wireless network at all anymore. Therefore, you will need to run a fresh new wireless setup installation. The wireless setup and install would be easiest on your new Windows computer. Than once the printer is set up properly on the wireless network again you can add it back to your Mac.
Step 1: Powercycle Network:
First, unplug the power cable to your Router
Once your Router is unplugged, turn off your printer
Next, shut down your computer
After 30 seconds to 1 minutes, plug your Router back in
Next, turn on your printer
Turn on the computer
Step 2: Install Printer Wirelessly:
Please have your USB Cable handy but do not plug in your USB Cable until prompted.
On your Windows computer please click the following link: Windows: HP LaserJet Full Feature Software and Driver
Once at the website, select the Download option
Allow the download to run once completed
The driver package will extract and then launch the installer for you.
Please run through the step-by-step instructions to 'Connect through a wireless network'
When prompted, plug in your USB Cable
The Wireless Configuration will now complete
Once the Installation on your Windows computer is complete you will be prompted by the installer to disconnect your USB Cable
Now you should be able to go on your Mac and open Print & Scan and (+) Add your product back in.
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

I am unable to connect my iPhone5 to macbook Pro running on Version 10.6.8. Help please?

You probably need to upgrade your Mac software to 10.8.2 to handle ios6.

All in one HP Laser Jet Pro 200 Color MFP (M276n) stopped working

I have an HP Laser Jet Pro 200 Color MFP (M276n) that I had installed and woking fine.
I changed my desk and removed the USB from the computer and when I plugged it in again i could not print or use any of the functions through the computer. I'm running 64bit Win 7.
I've tried unistalling the printer and downloading the laster driver package from HP.com.
But when I try installing it and come to where the installationprogram want me to connect the USB-cabel the printer doesn't show up (I can't click "Next" to begin installtion).
So right know I cant print and I can't reinstall the printer.
How do I fix this??

Make sure the usb cable is plugged in properly, the right port at the back of the printer. If still doean't work, maybe get a new usb cable?

Laser jet pro CM1415 will not send or receive faxes

I just bought a MAC OSX 10.9.5 and downloaded upgrades for my laser jet pro CM1415fnw printer plus the firmware upgrade from HP website. The printer will scan and print but will not fax. we are set up for wireless and I have spent the last 2 days trying to figure this out. The message says that no phone line detected. ??? This printer worked perfectly with my old MAC computer but is bing very obnoxious now.
Thank you for any help you can give me. collette

Hi @dumtech ,
I see that you are unable to fax with the new Mac using 10.9. I can help you with this.
Did you mean you downloaded and installed the Full Feature Software drivers?
HP LaserJet Pro CM1415 Color Multifunction Printer series Full Feature Software and Drivers.
Are you trying to send a fax from the Mac or from the printer's control panel?
If you can't fax from the Mac, try the following:
Check to see if the fax driver is installed.
Click the Apple menu, and then click System Preferences.
Click Printers & Scanners.
If not, the + sign.
Select the printer from the list.
Beside USE: make sure it lists the printer's name only/fax.
Click on the add button.
Check the driver name that is installed for the printer. Make sure it shows just the printer's name also.
If the full printer name isn't listed correctly, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
Try faxing again.
If you can't Fax from the Printer, please try these steps:
Make sure you are using the 2 wire fax cable.
Run this test for the fax.
From the Home screen, touch the wrench button.
Touch the service button.
Touch the Fax service button.
Touch run fax test.
You should get 4 passes.
Turn the private receive off:
Go setup/fax setup menu/advanced setup/private receive/turn it off.
Turn off the error correction:
Go setup/service /fax service/error correction/turn it off.
Change the fax speed to medium:
Go to setup/fax setup /advanced setup/fax speed/change it to medium.
Clear the saved faxes:
Go to setup/service menu/fax service/clear saved faxes/OK to clear.
If you are still having issues, then please follow the steps in this document.
Cannot Send or Receive Faxes.
Can you fax from the printer?
Was the fax and printer driver both installed?
Were you able to fax from the Mac?
Please provide in detail the results if you are still having issues.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Laser Jet Pro CM1415fnw color will not print from eprint

Laser Jet Pro CM1415fnw color printer will print from laptop but not from email. Signal on printer has strong internet connection and so does computer. I tried to send a pic with my phone but it did not print.

I will need a little more info in order to help out. If you send the printer an ePrint of a text document, will it print that plan document? Also, if the picture that you are sending is less than 100 DPI (dot per inch) the printer will not print that because of the quality. You can send the picture to the computer, open it and the right click on it and look under “properties” and it will give you the DPI information. It is labeled vertical and horizontal resolution. Lastly, what type of phone do you have? What email client are you using to send the picture to the printer?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

How to print envelopes hp laser jet pro mfp m225dw

Can you please advise as to how I can print invitation style (4 3/8 x 5 2/4) envelopes on the Laser Jet Pro MFP M225dw? Also, if my template is set up for a horizontal mail merge configuration, how should the envelope be inserted into the printer?

Hey @Shaggs,
I would like to assist you today with printing on envelopes with your HP LaserJet Pro MFP M225dw.
Please refer to the document below for step by step instructions on how to load envelopes in your printers paper tray:
Loading Plain Paper and Envelopes
Once you have your envelope loaded properly, open up the program that you want to print envelopes from. Because Word seems to be the standard program that people print envelopes from I'm going to provide you with the envelope printing instructions for that specific program. Should these steps not work for you, be sure to respond to this post with your Operating System and the program that you're printing from.
What's my OS?
How to Print Envelopes from Word:
1. Open Word and click on Mailings at the top
2. Select 'Envelopes' from the top left hand side
3. An Envelopes and Labels page should now open. Enter your Delivery and Return Addresses.
4. Select 'Options' on the bottom right hand side.
5. Under the 'Envelope Options' tab ensure that your Envelope size is appropriately selected.
6. Select the 'Printing Options' tab at the top. You now need to select the appropriate Feed Method for your product.
7. Make sure that you choose the 'Face up' option.
8. Also ensure that 'Clockwise Rotation' is not selected.
9. Hit 'OK' and 'print'
Here is a video for additional instruction:
Please respond to the this post with the result of your envelope printing. Thanks for reaching out to the HP Support Forums. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Laser jet pro 200 will not copy

Hi, I have had my laser jet pro 200 for at least 6 months and only used it as a printer. For the first time today I tried to copy something and I got a blank piece of paper. I tried the flat bed as well as the feeder and same result. Hopefully there is a setting I missed. Any thoughts?
This question was solved.
View Solution.

HI Brian_D_H,
Thanks for posting what you've done so far, based on that - I've been able to find some troubleshooting guides for you to follow:
Troubleshoot Copy Quality Problems
Troubleshooting Print Quality Issues
If those don't help, and the toner isn't depleted, you'd be best to call tech support for more help. You can contact HP support in North America at 1-800-474-6836 or find the local telephone number for your country here: http://welcome.hp.com/country/w1/en/support.html Please look for the category "Technical Support After you Buy"
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

My Laser Jet Pro CM1415fnw color - will not print ... WILL let me fax...

My Laser Jet Pro CM1415fnw color - will not print ... will let me fax... then it goes to a screen like it is thinking ....the screen shows HP.... enerystar.... and a white bar on the bottom ...then it "initializing" and acts like it wants to print something. Help

Does the printer ever come to "ready" or Home screen? If it does not then i would recommend calling support and they may be able to help you with restoring the device to factory settings. If this is constantly occuring every time you boot you may want to try upgrading the fw to the latest version. Also if it is just showing "Calibrating" very frequently in the Embedded WebServer (EWS), navigate to IP if you have it, in the "System" , "Print quality", you can can change the calibration timers and see if that helps.
I am an HP Employee.

Laser jet pro m475 won't print through the wire

Hi laser jet pro 400 as just decided it's going to print anymore through the wire. Tried three different wires no good. It says not communicating with printer. Tried others computers and it the same.
Any ideas
Thanks Craig

Digcon,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

I am trying to be able to print on my Laser Jet Pro 200 color MFP 276nw printer from my Galaxy Note 10.1 and am instructed to set up HP web services. I need some help to know how to do this.

Hi,
Please try a print app such as HP ePint on your Galaxy:
http://www.hp.com/united-states/campaigns/mobility/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Error Code 79 on Laser Jet Pro 400

Have not had printer long...... Keeps giving message Error 79 it is a all in one Laser Jet Pro 400!!!!!!

Hi All,
I found and would like to share one of the root cause of the error in my network.It is caused by unsuccessful printing process of one or more computers in the network. I could have fixed the error 79 with the following few steps.
1.Turned off power of the Printer
2.Check and Remove printing process from every computer that can have access for the printer in the network.
3.In domain network, you cannot cancel the printing process check the owner in "See What's Printing" box
4.Then log in with that account and try to remove
5.If you cannot still cancel the printing process you have to remove and add the printer again.
After doing this steps on every computer, having access to the printer, in the network, you can switch on the printer and it should be working well.
Omar-E wrote:
@Kasba
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar

Laser Jet Pro MFP M127fn

I downloaded windows 10 and now my laser Jet Pro does not workcan you please help me with thisMargie

Hey , Welcome to the HP Support Forum. I see that your HP LaserJet Pro MFP 127fn has ceased working from PC since performing a Windows 10 update. I would like to help you with this. My guess is that this loss of functionality can be attributed to the fact that no Windows 10 driver has been released for your 127fn. Having said that, I have had some success in reloading Windows 8.1 printer drivers on 10 setups. I recommend you try the following steps: Press the Windows key + r and type control panel in the box that pops up. Press Enter. Click on the Devices and Printers folder. If you see your 127fn in there, right-click on it and remove/delete the printer. Go back to the Control Panel. Click on the Programs and Features Folder (might appear as Apps and Features). Look for your printer's software and uninstall it. Once that's completed click here and install the 8.1-friendly driver for your printer. Follow the usual prompts to complete the setup. Please let me know the result of your troubleshooting by responding to this post. If I have helped you resolve the issue and you liked this post, feel free to give me virtual props by clicking on the 'Thumbs Up' icon below and clicking to accept this solution. Thank you for posting in the HP Support Forum. Have a great day!

Unable to connect my Apple TV to my wireless network

Hi
I have an Apple TVMC572LL/A
I had to replace my wireless router. I am now using a dual band router.
I am unable to connect to the 5GHz signal offered by the router.
It is a Netgear N750.
Is there an issue with this generation Apple TV and 5GHz?

Hi Iv'e been trying to solve this issue for a couple of weeks now and have done loads of digging. My Atv worked fine when I bought it Gen1 and connected to my wifi no problem. Then for some reason dropped the wifi, it could find the wifi but wouldn't let me join it!
The solution and worked for me....I removed my router that was sitting on top of the Atv. Apparently it causes issues and bingo connected straight away to my wifi
Have read a lot of stories thread regarding these issues and people storing the unit behind under tv's etc. Stand the unit alone and see what happenes?
Hope this works for you as it did for me Happy viewing again.

Unable to connect hp photosmart c4480 printer to wireless network

I just purchased a new laptop HP dv7-6169nr but I'm unable to connect to my HP printer Photosmart C4480. I'm connected by home linksys. I tried to set up connection by using "sharing" properties but I guess I must be doing something wrong because I'm able to find the printer but when I try to print, the computer cannot find the printer. Can anyone help me?

Hey there!
Do you have a different pc available? Or if you have a friend who has a laptop will do as well. Because that will answer your question if its an issue with your pc. If it doesnt work with the other pc and you've tried a diff cable, its a big possibility its with the usb port on the printer.
Now, if you dont know anybody with a diff pc, you might wanna check your firewall settings. Its also one reason why your pc cant detect the printer.
You can also disable the startup programs just to make sure its not an issue with any 3rd party software. Try to follow the steps in this link in how to disable them ( and make sure you re-enable them once your done )
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&la...
if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

Laser jet pro won't scan to network folder

I have just setup a Laserjet Pro 200 (MFP M276nw) and have it successfully printing from an iMac running Mavericks OS. I am also able to scan using the HP scanning utility. All of this is connected via my wireless network.
However, no matter what I try I am unable to scan directly into a network folder. I have setup file sharing and ensured it is enabled for SMB sharing. I have ensured that the computer account on the shared folder I have created has full read/write access. I have created the network folder via the printer' ews as per the HP instructions (the path being \\<my mac's IP address>\public) and made sure username and password are set correctly. When I test the network folder I get an "Unable to connect to network folder" message.
I have disabled the Mac's firewall and have ensured that the printer software and firmware are the most recent versions available (they weren't but I updated them). I have deleted the shares, disabled file sharing, rebooted and then re-enabled file sharing, re-created the shares and set them up again in the ews but still it doesn't work. I can ping the printer successfully from the Mac and as stated earlier, can print and scan using the HP scan utility.
I have rebooted the printer and also the router.
Please help!

Hi Aye_curumba,
I understand you can print and scan, but you are unable to scan to the network folder on the Mac. I can help you with this. It it is usually a issue with the path to the network folder.
Here are the steps below for setting up the network folder if you would like to try it.
You might have to contact Apple to get the registered user and password name.
I would ask them to help setup the network folder also.
1. Create a new folder on your computer.
2. Right click (CTRL+Left click if using the Mac keyboard) it and then select Get Info.
3. Unlock the screen, set the everyones term as Read & Write, located under Sharing & Permissions..
4. Enter System Preferences > Sharing and then select File Sharing from the left bar.
5. Click the Options button, mark the Share files and folders using SMB (Windows) and click Done.
6. Under Shared Folders, click the Plus sign and select the configured folder.
7. Make sure that "Everyone" permissions are set to Read & Write under the Users list as well.
8. You will see the IP Address listed at the top of that screen, take a note to configure it from the EWS page.
You should use the following path template:
//IP-ADRESS/Shared-Folder-Name
Make sure to include your username and password while setting the network folder scan.
I have provided a document for the setup for scanning to a network folder.
How to Scan: From the Control Panel (Including Scan to Email, to a PDF, and to a Network Folder).
Select Scan to a network folder.
Let me know how you make out.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to connect HP PC or Macbook Pro wirelessly to Laser jet pro P1102w

Similar Messages

Maybe you are looking for