HT4528 Tried updating my software. Now phone stuck with plug into itunes icon. Anyway to restore without itunes?

Tried updating my software. Now the screen is stuck on plug into iTunes icon. I don't have a computer I can use. Is there anyway to get around this and fix phone?

No chance.
If the "plug into iTunes"-Logo appears, you have to do so.
Sorry.

Similar Messages

  • I tried updating the software, now i cant use my mini ipod!

    hey everyone can anyone give me some help, i tried updating the software using the updater, and i d/l the updater i updated via the software, then it tells me to plug it to the mains as it displays on my mini ipod... i plugged in mains and it doenst respond just shows the display image again(the connect it to mains one) anyone know what i can do, anyone? thx

    Hey guys,
    I used the updater on a photo Ipod and on a mini Ipod. The photo ipod had no issues but the mini ipod is presenting the same problem as Simon's. After updating the software, the screen asks to plug the ipod to the wall to flash the card. After doing so it showed me the apple logo and then back to asking to plug it to the wall. It's just stuck there. I have tried resetting it several times with no luck. I tried to plug it to the computer to restore it but since it’s stuck asking to plug it to the wall the computer can't read it. I tried to put it in disc mode and didn’t work either. Any ideas on how to get out of this mess? Thank you

  • Tries updating iPhone 4S with iOS 6, update failed and now phone stuck on itunes logo

    So i tried updating my iPhone last night to ios 6. Soon after the update began, iTunes said an error occurred and the installation stopped. now my phone is stuck on the itunes logo with a usb plug under it. I have tried everything i know of. turning the phone on and off/trying the reset thing with the power/home button does nothing. plugging into the wall does nothing. when i plug the phone into my computer, the sound of a device being connected happens, but iTunes does not recognize a device. no message pops up about a device in recovery mode or anything. I uninstalled then reinstalled everything apple-related, did not fix the problem. I'm not overly tech-savvy, but if anyone has any suggestions, lemme know please. ive spent well over 5 hours trying to fix this thing to no avail

    OK i figured it out. you have to put it in DFU mode before itunes will recognize the phone.
    instructions: http://www.iclarified.com/entry/index.php?enid=1034

  • Tryed updaTING my software now keeps flashing red light

    morning all
    i tried to update my BB software via black berry desk top maneger my phone restarted before it finished now wont switch on even the P.C wont recognise it tryed removing battery and even change the battery nothing seems to be working  

    Try this to put the software on device..
    Open DTM - then application loader. on the first screen, connect the blackberry WITH THE BATTERY OUT.
    Leave it for up to 3 mins till you see the pin number flash under connections.
    Then press next and then replacement the battery.
    The follow the steps found Here.
    This of course will only work if you actually have the Device software installed to the computer as well.
    To check if you do, open up desktop Manager - Help - About Desktop Manager - Click Device Software Tab.
    In here you should see the software installed to the pc listed.
    If not, go to http://na.blackberry.com/eng/support/do ... _sites.jsp to download the software specific for your carrier/device.
    Failing all this, your carrier should have escalated the call to RIM to do a javaload over the phone with you before they authorised a replacement device. Oh well not to worry.
    RIM do a javaload when the application loader won't recognise the device, with or without the battery in it.
    Also make sure there is no other power going to usb devices and if a laptop, have it plugged into ac power.
    Good luck and let us know how you go!
    If your issue is resolved, put a checkmark in the green box that contains the resolution.
    OR
    If it was just/or also really helpful - Give it a Kudos.. Go on Mate.. Help the rest of the clueless blackberry user world find their answer too..
    ~Gday from Down Under~

  • Updated iphone software, now phone is frozen on picture of USB to itunes

    I need help...I finally updated the software on my iphone 4, then after it installed, the screen shows a picture of a usb cord going to itunes...i can't shut phone off, it's frozen...I tried to link to itunes, nothing is happening!

    http://support.apple.com/kb/HT1808

  • Phone stuck at "Plug Into iTunes screen" but it is not frozen.

    I'm using windows 8.1. My iTunes can successfully sync and detect my ipad air but after updating my ipod touch 4th gen this afternoon, it is stuck at the "Plug into iTunes" screen you have when you first get such a device. When I plug it into my computer, the "USB Plug-in" sound is heard and the Apple Mobile Device Driver detects it in Device manager, but the Ipod does not appear in My Computer or iTunes and remains stuck on the "Plug into to iTunes" screen

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Forgot passcode or device disabled
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    Next try on another computer

  • Tried to update software now phone has itunes logo on screen and ont do anything

    got mesage asking to update software now phone has itunes logo on screen and wont do any thing else on i tunes say device not found

    http://support.apple.com/kb/HT1808

  • Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" after trying to update to iOs 5.1 and receiving error (1).

    Tried to upgrade my iPhone 4 to 5.1 and now it is  stuck in "plug into itunes mode" but will not recover when I plug it in. It is coming up as "unkown error (1)". Is there anything I can do?
    Also, is there any way to recover pictures I have not yet backed up? They should be on iTunes, but do not show up when I plug the phone in or otherwise.
    Is there any hope in saving this phone or is my best bet contacting Verizon or Apple to overnight me a new one?

    From iPhoneWiki:
    Try changing the USB port (the back one of chassis is better) and restart computer.
    The installed version of iTunes may also be too old. Update iTunes.
    Also put your iPhone in DFU mode when doing the above and restore. It's a software error.

  • I have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    i have to restore my phone from back up but in order to do it i had to update my software. now that my software is updated there isnt enough room on the phone to back up. is there a way to only restore certain things from the backup like contacts?

    Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

  • I bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom

    i bought htc 8x verizon employee edition and when i update it and during installation with my error phone get off and now phone stuck on some wheel running thing and wont get on please tell me if i could download the rom or anything also

        Hi mnomi! Sorry to learn of the trouble you're running into with your new phone! Have you already switched the device via your My Verizon : http://vz.to/16lkVUY Once you have done this, and verify the sim card is inserted securely, the activation will begin. If the phone is stuck on the wheel and you cannot move forward, you may want to do an alternative reset. Please follow the below instructions:
    1) Ensure the device is powered off.
    2) Press and hold the Volume Down button (located on the right edge) until instructed to release in step 4.
    3) Press and hold the Power button (located on the top-right edge) until the device vibrates (approximately 2 seconds) then release.
    4) When the restore screen appears (exclamation mark), release the Volume Down button.
    5) From the restore screen, press then release the following keys to initiate the reset process:
    1. Volume Up button
    2. Volume Down button
    3. Power button
    4. Volume Down button
    *Allow several minutes for the process to complete (rotating gears appear on the display to indicate that the reset is in progress).
    If you have any further questions or concerns, please let us know. Keep us posted if this resolves your concerns. Thanks!
    -KristieQ_VZW
    Follow us on Twitter @VZW Support

  • HT4623 i am updating software now im stuck on itunes and the plug to plug it in my computer what do i do now.

    i am updating software now im stuck on itunes and the plug to plug it in my computer what do i do now.

    Um, how about plugging it into your computer? 

  • Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

    Wanted to update the software now available, but it is asking for a pass code. As far as I remember in didn't put in any pass code , how do I settle this issue . Earlier updates were asking Apple ID but pass code for updating the new soft ware not known.

    Hello Kewal,
    Thank you for the details of the issue you are experiencing when trying to perform an update.  I recommend trying to update using iTunes, and as always, it is a good idea to make a backup first. 
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht4623
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • When trying to install os x mavericks to my macbook pro as it started to install the computer now is stuck with the OS X Mavericks intall showing and I can't get out of it or force quit?

    When trying to upgrade and install OS X Mmavericks to my Macbook Pro as it started to install the computer stopped the install and now is stuck with the OS X Mavericks intall window showing and I can't get out of it or force quit? I can not do anything else because this is stuck with this window/install screen showing. I have tried everything to get back to my regular desktop. I do not want to wipe the drive because I have photos on it that I want to save. So if there is any way to bypass this installer and get back to my regular desktop I would greatly appreciate the help.

    UPDATE*  Macbook7,1
    Mavericks 10.9.4
    8GB ram

  • My iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. please help!

    my iPod appeared to be dead, i plugged it into my computer to charge and it said it needed to be restored. it updated it and now is stuck and my itunes says "waiting for iPod" and has been this way for hours. i've tried to hold down the home and power button and nothing happens!! my computere and itunes recognizes the iPod, but the iPod its self is completely unresponsive!! and helpoful hints?

    See Here...
    AMDS
    http://support.apple.com/kb/TS1567

  • I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes

    I tried to update to ios7 but it said to plug into itunes. I've plugged it in several times but the update fails everytime and my phone continues to say plug into itunes. Any help is greatly appreciated

    Your iPhone was hacked at a "small phone unlocking shop "
    Only the carrier who locked the iPhone from new can unlock it no-one else
    Anything else is hacking which forfeits any help from Apple and this forum
    I also doubt that Orange will touch it
    For an understanding what hacking does see here
    http://support.apple.com/kb/HT3743..
    Since all the UK carriers ( I assume you are in the UK )
    offer unlocking you have trashed a perfectly good iPhone

Maybe you are looking for

  • Web links in .pdfs inoperable- "Acrob. could not run the browser"

    I keep my Adobe Reader updated often, but I've been experiencing a severe inconsistency with the ability to open a (FFox) web page by clicking a link given by the author of any given .pdf., embedded in it. Sometimes it works and opens up the new FFox

  • How do I get a disk out of the drive on a PowerPC G5 that won't boot

    I tried to reinstall OS X 10.4.9 to an old machine to clear the machine to sell It wouldn't boot ... multi-lingual restart screen with a message that a driver might be missing now I can't boot the machine and the disk is in the drive which I can't ge

  • Firewire 800 external drive not found!

    My power went out last night, so this morning my external drive is not on my desktop. It isn't read by my computer. I tried it on my other G5 and it reads it, but for some reason it won't show up on this one. Could my settings be screwed up? Please h

  • Trouble emailing locked pdf to Adobe Reader user

    My staff use a pdf form which I created in Pro to track client progress.  They fill in the form, then lock it using password security and email it to the client.  Some clients who only have Adobe Reader are having trouble as they only get a blank for

  • Peak Power Scheduler does not save

    I have a T420 and Power Manager 6.55 installed. Because my notebook is almost always working on the dockstation, it keeps charging all the time. Not good. So I decided to use the Peak Power Scheduler to use the battery at least once per day. But ever