Canon LIDE 90 on Lion MP Navigator?

I have just downloaded and installed new Canon software (LION) for my LIDE 90 scanner and it immediately scans to pictures as soon as it is opened. A pain. Cannot locate MP Navigator EX for Lion anywhere and wondering if MP Navigator EX 1.0 will work.

Hope this helps...
http://canoncanada.custhelp.com/app/answers/detail/a_id/33437/p/18
http://www.canon.ca/inetCA/serviceDetail?m=load&id=4&sid=26&mid=0002200344&type= D&opt=1

Similar Messages

  • Drivers for scanner canon lide 110 under Lion

    Is anyone aware whether Canon released (or is about to release) new drivers for its Lide 110? With Lion the available software works ... part-time. Also I stiull do not know what piece of software is necessary to have the scanner operating: the download sectin at Canon has at least four drivers, but only insufficient info about their functions. Thanks in advance. Regards

    NukeShim,
    Could confirm that you're seeing the scanner, that is the LiDE-80 specifcally, under Image Capture in Mavericks, and that you can scan? Not showing up for me on a 2012 MBP running the latest 10.8.5 .
    I'd actually really be surprised if it would, since the LiDe-80 specifically was internally different from the rest of the LiDE series. Canon didn't write the original drivers for them, some 3d-party did. The drivers were weak MacOS 9 updates (filename limited to 32 chars, no unicode support). They were never updated for the Intel Macs, unlike most of the LiDE line. I know this because I corresponded with Canon on this in 2008. The last driver is  a PowerPC one from 2005, which officially supports up to 10.4 only, although IIRC it did work for me on 10.5 for a while after doing some manual installing.

  • Canon Lide 60 Scanner does not work on Mountain Lion

    Hi! Is anybody out there who would know how my good old Canon Lide 60 would work with OSX 10.8? Canon says Mountain Lion ist not supported on this device. Anyone an idea what to do without buying a new one? Thank you!

    I also was looking for a working driver for ML 10.8
    i bought a new canon scanner Lide 110 it's working perfect.
    I tried my old scanner( Canon Lide 60) or it should work with this installed canon driver
    i'am surprised my old scanner, lide 60  is working min Ml 10.8.4
    photoloader does not recognise it. But Vuescan does. i use Vuescan 9.2.21
    so the Lide 110 software works on 10.8 en higher for the Lide 60

  • Canon LiDE 210 insufficient memory with Lion

    My LiDE 210 scanner which has worked in the past using OSX10.7 but it now says "insufficient memory" each time I launch MP Navigator EX 4.0.
    Canon advised me to open MP Navigator and select 'View and Use', where it says 'Specify the scanned location', select a different scanner location to see if this resolves the issue. I am unable to do this as I get the "insufficient memory" message immediately I double click on the Canon software. If this did not resolve the issue, they recommended uninstalling and re-installing the latest drivers, which I have done but with no solution to the problem. I haved repaired permissions, checked printers in the library and there does not seem to be anything missing or conflicting. I cannot find any reference to TWAIN in the Library and finally the basic scanner functions are available using Image Capture.
    Any ideas most welcome. Thanks

    The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
    If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

  • Canon LiDE 60, Useless with Lion

    Im on my way to the garbage dump with my Canon LiDE 60, then moving on to some other scanner aat the office supply store.
    A whole night of no progress, including VueScan, the whole nine yards, yielded nothing.
    Canon-shame on y'all for declining to update this driver, then fudging wy saying that its on the installation disk.  Disks will be gone for saftware soon, if not already.  Take some responsibility.
    Saxoformer

    I also was looking for a working driver for ML 10.8
    i bought a new canon scanner Lide 110 it's working perfect.
    I tried my old scanner( Canon Lide 60) or it should work with this installed canon driver
    i'am surprised my old scanner, lide 60  is working min Ml 10.8.4
    photoloader does not recognise it. But Vuescan does. i use Vuescan 9.2.21
    so the Lide 110 software works on 10.8 en higher for the Lide 60

  • Problems with using Canon LiDE 210 and OSX 10.7.4

    I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

    Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
    Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
    http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
    http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
    I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
    Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
    At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
    So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
    I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
    Does anyone have any experience of this issue, does anyone know how I might resolve it?
    Many thanks,
    Jeff

  • TWAIN Sane with Canon LiDE 50

    Hello!
    I'm trying to use a Canon LiDE 50 scanner under OS X Mavericks 10.9 with TWAIN Sane drivers.
    It worked well with Mountain Lion OS X 10.8 and now with the newly complied Sane drivers for Mavericks, Sane doesn't recognize the scanner anymore :-(
    Anyone else experiences the same problem and has solved it?

    Hi, same here. I was really happy to find Sane for OS X. But actually it does not work with my Canon Lide 50 and Mavericks. Before I have used the original Canon Lide 35 drivers to work with every OS X until Mavericks… But now I found a solution, just download the VueScan for the Lide 35 (which is the same Genesys hardware as the Lide 50) and it will all work. Also VueScan will work with the Scanner in Mavericks properly

  • No driver for Canon Lide 80 scanner?

    I recently bought a Mac Mini with Lion installed to replace my old Windows PC and upgraded my late 2009 Imac to Lion to be able to use iCloud between my UK base and my second home in France. Everything went well until I realised that neither my Canon Lide 80 scanner or my Canoscan 4400F wwould work with Lion. I am waiting for a responsse from Canon but, meanwhile, any ideas for a workaround? My trusty old HP 920C printer is recognised as a generic printer and works fine but, it seems, there are no generic scanner drivers.

    Thank you John. Vuescan worked for my Canoscan 4400F but, in fact, led me back to Canon support where the driver and toolbox, formerly unavailable, had been updated to my scanner. A very satisfying solution.
    Motard

  • Has 10.8.3 broken Canon Lide 100 driver?

    My Canon Lide 100 scanner powered by MP Navigator EX software no longer works after installation of 10.8.3. The error message  says that  the relevant driver is not installed. Even after re-installation of the latest available software the same error appears. Any suggestions as to a workaround?

    Just to be clear when you say you downloaded the latest software, you downloaded MP Navigator EX 2.0.6 and MP Navigator EX 2.0 Opener from the Canon website? If you did and it doesn't work then you will probably have to wait for Canon to update the software.

  • Canon lide 210 not recognized in yosemite. Latest driver downloaded

    Since upgrading from Mavericks to Yosemite (10.10.1) I have lost capability with my Canon Lide 210 scanner and Jam XT bluetooth wireless speaker.
    I have downloaded and installed the latest Canon driver to no avail. Any ideas? Both were working great before I upgraded to Yosemite.

    The scanner driver file is installed in HD > Library > Image Capture > TWAIN Data Sources. Here you will see the LiDE210.ds file. This package file contains information used by the scanner and removing the scanner entry in Print & Scan does not remove this file. You could trash this file (make sure you remove the entry from Print & Scan first) and then run the v17.7.1 scanner driver installer again.
    If MP Navigator still fails it could actually be this application rather than the scanner driver at fault. Note that Image Capture uses a different driver called an ICA. So to test that the TWAIN scanner driver is okay you would need a TWAIN compatible application. And one such application is VueScan. Install this and see if you can scan without any error. If you can then it indicates the issue is with MP Navigator. If VueScan also fails then you do have a scanner driver issue.

  • Scanning question with the Canon LiDE 110

    Hello, I am trying to scan pictures with the Canon LIDE 110 using Photoshop Elements on a PC. The Get Photos/  from Scanner in Photoshop works great when i have the image set to save as a jpg' but when i set preferences to scan in and save the image as a TIFF, I get a message that says "Software for this Device could not be launched. The device is not connected or busy" What can I do to be able to scan in and save a TIFF?
    Thanks, Walter

    Hello wtneary.
    Unfortunately, we are not familiar with some of the message you described.
    However, our MP Navigator program has the ability to save images in TIFF format.  Please visit the following link to download the program:
    http://www.usa.canon.com/cusa/consumer/products/scanners/photo_scanners/canoscan_lide110#DriversAndS...
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • HT3258 canon lide 35

    I just updated my System to OS Lion and now my older Canon Lide 35 scanner will not work.  Any solutions other than a new scanner.  The Canon site says there is not driver available.

    Hi Ruflin,
    I'm in the same boat as you......10.7 Lion with Canon Lide 50......did you manage to get yours working?
    I see that it is listed as:
    CanoScan:
      Product ID:          0x2213
      Vendor ID:          0x04a9  (Canon Inc.)
      Version:          3.03
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Canon
      Location ID:          0xfa132000 / 7
      Current Available (mA):          500
      Current Required (mA):          Unknown (Device has not been configured)
    Canon told me that this scanner is too outdated for my new OS. Yet, there is nothing wrong with my scanner.
    Can anyone help me, please?
    Thanks.
    Lisa

  • Canon Lide 35 No Longer works in Snow Leopard

    Here some more specific results on what happens when you try to scan with the Lide 35 in Snow Leopard.
    1) The ONLY choice is to use image capture. Canon software doesn't work
    2) Detect Multiple images is completely broken
    3) The image size is super small. )i e, the dimensions settings don't work right
    4) You have to increase the resolution to 600 to 1200 in order to "fool" Image Capture into scanning at the proper size
    5) As soon as you select Ovweview a second time, it stops working and gives you a blank scan. You have to log out and back in to get it working.
    6) The only "workaround" I've found is to scan the same dimensions every time at 1200 dpi and edit and save the photo in another app.
    I realize the Canon Lide 35 is an older scanner, but please Apple, none of us want to buy a new scanner just because we upgraded to Snow Leopard.
    I've spend an hour on the phone with Canon who tried to be very helpful. This happens on all my Snow Leopard Macs (I have three) and it seems clear that this is an Apple issue.

    Hi Tee,
    I can confirm what you are saying. I am running MacOS 10.6.2 on MacBook Pro and when I was trying to use my Canon LiDE 35 after installing "lide35osx7721en.dmg" and also "cstbosx5013ej4.dmg" I am still getting the error message "driver not found". The same Canon LiDE 35 still works beautifully with my PowerPC G4 under 10.4.11. - I am not sure whether there is any other software? The only oddity when installing those files I noticed was that "CNQL1208_ClassicNotSeize.kext" would not load...
    I have no solution to offer at this stage other than using the old Apple... Anybody any ideas??

  • Canon Lide 80 - not working after 10.5.8 update

    Hi,
    Wondered if anyone has a workaround for getting a Canon Lide 80 scanner to scan using Photoshop Elements 6, it worked in OS X v10.5.7 previously as I copied the latest ScanGear CS 7.2X plugin into the Photoshop Elements plug-in folder then ran Elements through Rosetta and it scanned with no problems however this now does not work.
    The plug-in is still selectable when using PSE6 but I get the following message "The necessary file could be missing or damaged, or the settings are incorrect. Reinstall the scanner driver. Scanner driver will be closed"
    I have made sure I have the latest plug-in but to no avail. Any assistance would be greatly appreciated.
    Cheers
    Andrew

    Can't speak specifically to Photoshop Elements, but my LiDE 80 works fine on 10.5.8 using both Canon's CanoScan application as well as VueScan, both of which use the same plug-in architecture as Photoshop.
    This is on a MacBook (Santa Rosa) after updating to Leopard 10.5.8 (it was previously running 10.5.4, where the scanner also worked).
    I am using the latest ScanGear driver and CanoScan Toolbox installs from Canon's US support website, where the
    filenames are LiDE80_7252MXEN.dmg and CSTb4130MXE.dmg respectively (the Canon site shows an update date of July '09, but in actuality none of the files have been updated since 2005).
    I didn't do anything special -- the scanner continued working normally after the system update.
    What I'd try is remove the driver (just to be safe, download & use Canon's driver removal utility from the same download page), search & nuke any files called Scangear on the machine (I'd also remove CanoScan if you have it installed), then reinstall from scratch.

  • Acrobat 9 Standard won't recognize Canon Lide 200 Scanner

    My recently installed Acrobat 9 Standard won't recognize my  Canon Lide 200 scanner even though Adobe Photoshop CS2 does.  I don't know what the problem is and how to solve it.

    Adobe Acrobat Pro 9 was recently installed on new Vista 64bit computer and functions with all programs and even prints to my Dell 1600n printer, but when I try to scan from the printer, it causes this error message and shuts Acrobat down:
    "ADOBE ACROBAT HAS STOPED WORKING A Problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available."
    I have lived with this since I bought the computer a month ago. Still no solution from Adobe and no response to an email that I sent to adobe support.

Maybe you are looking for