Maintenance order - component - pr + reservation

dear pm experts,
In maintenance order i wanted to created components pr + reservation, is it possible.
please let us know whether this is possible with maintenance order or service order ?
currently i am having setting either for pr or reservation number only in maintenance order -->
components.
thanx in advance
regards srihari

Yes, I agree with u, but in CS scenario
Like X - My company  Y- Vendor  Z- Customer
(Outsourced activity)
while doing Some Maintenance Activity ie., LPG Compressor at Customer Premises, we need some spares/materials and complete the service, here I raise cs notification -PR-PO on vendor in Service Order for PR-spares and vendor supplied at customer location, after service complete
I do migo/gr for same service order & raise sales order in same cs notification and take same same spares/materials in sales order, after sales order is saved,
requirement i have to do delivery of the same spares which are in service order -pr-spares thru outbound delivery, and
(this delivery from special stock or etc, is required as per legal requirement, hence need advise)
raise billing document thru vf01 against outbound delivery number.
kindly let us know any solution to achieve the above
thanx in advance
regards
srihari

Similar Messages

  • Mass Removal of component from Maintenance Order Component list

    Hi Gurus,
    I had a long list of material which have been set with deletion flag. With this list, I had remove them from BOM using CS20. Does anyone knows how to remove a component from the maintenance order component list based on that material had set deletion flag in material master & that GI had not been done? Appreciate your help.
    Best regards,
    David Tan

    I guess we dont have std function to do this..
    I will suggest to take help of an abaper & create a code to find material & delete from orders.
    Regards

  • Maintenance Order - disallowing deleting reservation after material issue

    Dear ALL,
    How to resrict deletion of reservation in maintenance order after material issue done partially / completely.
    Currently system is allowing to delete the reservation in maintenance order.
    Please guide.
    Regards,
    Prashant Salvi

    Hi,
          In Tcode O04C for Version 00000000 , Application Area CN , Msg No : 750 , mention as Error message ..
    If the above does not work then use user exit CNEX0039 : Check Whether Component can be Deleted
    regrds
    pushpa

  • Material reservation deleted into maintenance order

    Dear,
    I'm facing with strange issue with some maintenance order... The users have created some maintenance order, done material reservation and released these order... After that they are trying change these materials reservation and then when they go until the reservation they can see the material with status "item is deleted".
    However no changes was done these reservation. The components items is maintaned with gray scale.
    Wagner S.

    Wagner
    Can you please post the full message text including message number.
    Are you using any developments that might delete these components?
    Also, can you send a screen-shot of the following:
    Components tab with deletion indicator shown
    Order header - so we can see the statuses
    Double-click into one of the material items to view the General Data sub-tab
    PeteA

  • Return of unused spares against maintenance order

    Hi All,
    I have issued 6 qty of a spare material agianst a maintenance order / resrvation no.Now I have used only 4 qty & rest 2 qty I need to return to store agianst the same maintenance order or reservation no . I am trying to return it through MIGO t-code , but I can not change qty field in MIGO screen when I am selecting "goods receipt" & "reservation no" combination .Also I have tried through t-code MB11, mov. type - 262 where I have entered my maintenance order no , but system is not picking the material no in this screen automatically.
    Can any one please suggest how can I return my unused material issued agianst maintenance order? My requirement is to enter the referecne no either as maintenance order no or reservation no & system should pick the material no & qty field should be in edit mode.
    Thanks in advance
    rgd
    rajib

    Hi,
    Create reservation for same material in same maintenance order with negative quantity (quantity to be returned to stores).
    Now use the newly generated reservation for GI. This leads to movement 262 against maintenance order in question for material return to stores.
    Vijay

  • Manual Reservation for Maintenance Order (Category 30)

    Hi,
    Can anyone suggest some procedure so that I can stop automatic reservation creation from Maintenance Order (type PM01, Category 30) and create manual reservation for the same.
    Presently Manual reservation is not allowed for Maintenance Order.
    Thanks
    Satadal

    Hello Satadal
    nobody's answered you because it's not possible to create a manual reserve for logistic orders as Network/PP orders or PM orders.
    If you want inhibit the automatic reserve creation :
    - customizing (transaction OIOE) : set "Never" in field "Reservation Relevance/Generation of Purchase Requisition". The reserves will be created but they will be not relevant for MRP.
    - Hide the field AUDISP "Reservation Relevance/Generation of Purchase Requisition"  at component level (OICMPD) and operation level (OIOPD)
    Good luck
    silvia

  • Deletion of Reservation item generated from Maintenance Order

    We have a peculiar problem.
    In Production system, weu2019ve close Maintenance Order that has a component reservation. When closing the Maintenance Order, the reservation has been set deletion flag but two components are not being marked for deletion.
    We only have two reservations on Production system with this situation, on any other cases the reservation takes the deletion flag when closing the Maintenance Order.
    What could be the problem?

    Hi,
    Check whether you have done good issue for that component .
    whenever you do Teco open resurvation will cancelled.
    Regards,
    vinit

  • Manual Reservation for Maintenance Order

    Hi,
    Can anyone suggest some procedure so that I can stop automatic reservation creation from Maintenance Order (Transaction:IW31, type PM01, Category 30) and create manual reservation for the same.
    Presently Manual reservation is not allowed for Maintenance Order.
    Thanks
    Satadal

    To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
    I would suggest that you post this query in the MM forum also.
    thanks
    Bala

  • Automatic Reservation from Maintenance Order

    Hi,
    I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item.
    But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
    Can anybody suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
    Thanks in advance,
    Satadal

    Thanks for your answer. Actually I found that place, it is determined from OBYC transaction with a combination of GBB (A/c Key) and VBR (A/c Modifier).
    But for same movement type261, I need manual G/L allocation at runtime. i.e. depending upon case to case, the G/Ls will be different. So, different movement type perhaps would not serve the purpose.
    Basically I need to over-write the G/L for automatic reservation created from PM in the PM01 order type with category 30 where manual reservation is not allowed.
    Can you suggest any way out so that I can actually over-write the G/L for automatic reservation- through SPRO or some kind of development...
    Thanks
    Satadal

  • Query about Manual Reservation for Maintenance Order Category 30

    Hi,
    I have a problem. Generally from Maintenance Order type PM01 under Order Category 30, when we give some materials requirement, SAP automatically generate reservation for those materials and take the GL as Consumable Item.
    But in my case, that GL has to be changed depending on what perpose we are using the material. But Manual reservation is not allowed for the order category 30 and no GL can be changed for automatic reservation.
    Can anybody suggest any way-out so that we can give our desired GL No. for the reservation for Maintenance order (say Order type PM01 under category 30 which is SAP internal).
    Thanks in advance,
    Satadal

    To the best of my knowledge this is possible. To the best of my knowledge G/L account determination for every material happens after a series of checks are done internally by SAP. By checks I mean the sequence of steps as customized by the consultant in the configuration. Now at the end of the sequence if SAP has not succeeded in identifying a G/L account it will open up a tab in which u can manually enter the G/L account. For non-stock item you can anyway enter it.
    I would suggest that you post this query in the MM forum also.
    thanks
    Bala

  • Plan Component from Maintenance Order

    Hi,
    When i plan a component from maintenance order I use item category N with key MATE.
    But i woul plan component for purchase requisition on project stock( account assign Q) directly from Maintenance Order. Allow I insert item category N in the field ad near insert the value 2 for project stock.
    When i release the order the system blank the field and i don't create a Purchase requisition with project stock but i purchase requisition with account assignement F
    Because the system put away the field blank?, I must done another customizing, or i must utilize another KEY?
    Thank you

    Hi,
    When you make Item cat as N it means they are non stock .
    For non stock & with F order as account assignment system creates PR.
    if you want this componenet as Project stock them there are following  ways
    1.Make PR with item cat as Q & make PR on WBS or PS System.
      System will post direct entries.
    2.Make normal stock PR then issue against WBS by order
       Settle the maintenance order to WBS element
    3.Get material as normal stock material issue with 221 mvt against WBS or PS system.
       Systme will make enties to WBS.
    Ramesh

  • Component selection in maintenance order

    Hi,
    My client want to see unrestricted stock of material while creating maintenance order. In Component tab when we take input help to search components, we can able to see material no & descriprion. In addition I want is to display current unrestricted stock & plant for the material.
    Stock data can be taken from table MARD. I want to know is there any user exit available for this ??
    I know one exit IWO10011 Maint. order: Customer enhancement for component selection, but I am not sure whether this will work or not.
    Any input would be appreciated.
    Thanks,
    Hitesh

    Hello Hitesh,
    If you want to see the unrestricted stock of the material entered in component tab then put your cursor on the storage location
    field in the same component row and press F4. Here, you will get the unrestricted stock.
    Regards,
    Vaibhav Mishra

  • Reservation against maintenance order and MMBE

    Dear Experts,
    As per my knowledge the reservation which are created through maintenance order will be reflected in MMBE as we save the order, without specific to status of maintenance order.But here in my client it is not happening, instead of this it is getting reflected only after releasing the maintenance order. Reserved quantity of material is getting updated only after releasing the maintenance order.However if I select plant and check for reservation details there it shows all the reservations. But the quantity in Reseved column is getting updated only after releasing the maintenance order.
    Please tell me where is the setting for this type of system. Please correct me if I am wrong anywhere.
    I wanted the reservation quantity should get updated in MMBE at the moment I save the order. please do the needful.
    Thanks & Best regards,
    Praveen
    Edited by: Praveen kumar on Nov 28, 2008 4:23 PM

    hi praveen ,
    in MO itself in operation tab the last field you will find... Reservation/PR  with immediate,from release ,never ... u can control from here itself while creating MO .... or you can set this thru config --- Function and settings for order types --- Define collective Requsitions.. here you can find the same setting and ... better to grey out that field for MOs through field selections in operation detail screen in config.
    regrds
    pushpa

  • Reservation thru maintenance order

    Dear PM Gurus
    When I  create maintenance order & want to create reservation for stock material even when the stock level below to safety stock level ....where I can do this setting in PM customization.
    What is the use of Define Movement Types for Material Reservationsplease in SPRO tell me please ....
    Thanx in adavance...
    vineet

    hi
    while defining the availability check control in OPJJ tick mark the include safety stock .
    if you have only specified the movement types you can able to issue the material against the maintenance order
    regards
    thyagarajan

  • Reservation against maintenance order

    hi PM guru,
    my scenario is i want to transfer the requirements from maintenance order to MRP, to trigger purchasing, but i don't want to reserve the stock. I set 'never' in the configuration so that system doesn't create a reservation, but this does not trigger a requirements to MRP also. Please help and let me know if you need further clarification. Thanks

    Dear
    This case not required the PM orders to trigger the PR. In materail master in MRP 1 Tab you have to activate the MRP type (taken from configuration)
    Reorder point (if stock falls the below PR will generate automatically)
    Then maximum stock level to control the materails stock in plant
    MRP 2 tab needs to maintain the Safety stock to keep in minimum for unexpected
    Also needs to do the availablity check at master in MRP 3 tab for auto checking
    Finally these all in every periods which will be run by the stores dept at MD01
    If the stock fall below reorder then PR will created.
    Please have the discuss with your MM guys
    thenna

Maybe you are looking for