Open POs being seen in the report
There are around 20 open POs in the system from 2006 which have not been goods issued or goods receipts properly due to which the delivery completed indicator cannot be ticked manually. These POs need to be closed so that they are no more vissible in ME80FN report. Please advise.
Hi,
You can manually delete the line items in PO through ME22N or you can even set the delivery completed indicator if you are sure that there wont be any further GRN.
Edited by: Komal Gala on Aug 8, 2008 3:33 PM
Similar Messages
-
Materialized view not being used in the report
I have had a materialized view (MV) for a particular report. Recently, the report definition has changed little bit, so the existing MV is not being used by the report anymore. I copied the code Discoverer's SQL Inspection and recreated the materialized view. But still it is not working. Obviously, I am missing something at the database level. Does anyone have any idea? The database is 9i and Discoverer is 9.0.2. Thank you!
The SQL that you see from the Inspect SQL option will provide you with the SQL that Discoverer sends to the database. The database then may do a query rewrite to point to an available materialized view if available. This rewrite won't be seen from the inspect sql option. You need to check at the database level to verify if a query rewrite did in fact take place.
You may want to check the section titled "Query Rewrite with Materialized Views" from Ch1 - "Introduction to the Optimizer" in the Oracle9i Database Performance Tuning Guide and Reference, Release 2 (9.2), Part Number A96533-02, available at http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96533/optimops.htm#37287
Regards
Abhinav Agarwal
Oracle Business Intelligence Product Management
http://www.oracle.com/bi
http://www.oracle.com/technology/documentation/bi_ee.html
http://www.oracle.com/technology/software/products/ias/htdocs/101320bi.html
http://oraclebi.blogspot.com/ -
Where clause is not being passed to the report
I just upgraded my crystal reports from 10.0 to 11 R2. Reports were working fine in 10.0 version,
Reports are called from vb.net (vissual studio 2005). When I was running this reports using crystal 10.0 and visual studio 2005, it was working fine, After the upgrade report runs but I am noticing that where clause is not being passed to the reports.It generates report as there is no where clause and produces multiple pages report.I believe you are encountering an issue documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bip/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Ludek -
Udf Data is not being displayed in the report
Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
Open request not showing in the report
Hi,
We have built a query for planning to show open request. After 50,000 records, the request would be closed in the infoprovider. In the query, Request id is restricted with the most current data variable.
In Dev, the report shows the open request. But, in production, the report doesn't show the open request. When the Query properties are compared, the difference is the Statistics level is 0 in Dev and 1 in Production.
Is this an issue? If not, what could be the issue?
Thanks.From OSS note 411725 :
In all queries, which display data from transactional InfoCubes, characteristic 0REQUID must be included in the filter and variable 0S_RQMRC 'Most current data' must be used. This variable is part of the Business Content.This is required so that the system also includes the data records from open requests.
use this SAP EXIT variable in glbal filter. 0S_RQTRA (Most Current Data (Transactional InfoCube))..try
regards,.. -
Open View not seen in the 7.0 Query Analyzer
Hello ,
I am not able to see open view in the 7.0 Query Analyzer, but that seen in the 3.x Designer
Are we missing something here, or its the GUI issue
When we click on Open, I have only 2 options
Open Query....
Open Workbook...
I could locate my view through the open Query & then naviagting it from the Dialog box, but thats does not seem a good way of locating views.
Any help on this
Regards
LalanHi Lalan,
The Query View is not missing and it's not a GUI issue.It's by design.
With 7.x BEx Analyzer,the Query View can be opened only through Open->Open Query dialog
where you have to select the "Type" as "Query View".It will list the available query views in the open dialog.Select the query view you want to open and click "Open".
This is the way to open the query view with 7.x Analyzer.
Rgds,
Murali -
MSCI planning transaction - planning data have not seen in the report
Dear expert,
We are updating the sales planning via transaction MC88. So my goal is to see the results in the reports MCSI, but I have not seen the planned quontity. I have only seen the Actuals.
Please help me how to set up the system in order to see planned data in the report.
Thanks in advance.
Best Regards,
SlavisaHi,
The report will say "No Data Available" only when the selection of variables doesn't match with the data exists in the InfoCube.
Or when the condition is activated with the setting wherein no data found in the Cube.
Apply the condition or variable selection for which the data exists in the backend(Cube).
Rgds,
Murali -
Plan values not being displayed in the report ..
Hi All,
I have a query on query.. .
which displays actual and plan values , but the report is not showing the plan values
tell me how to do this
SruthiSruthi,
Basically how do you store the data in the transaction cube's ?
How does the data differs b/w Plan and actual for the same KF ?
It stores depending on the Version...
Restrict the KF to a perticular version ...
Then you can get the desired...
Check the LISTCUBE with different versions..
Cheer's
HVR. -
Credit Memos not seen in the Report
Hi all
My customer has a custom report which shows all the SD billed orders. The selection screens are Sales Doc# DocType, Industry Code, Material, Sold-to-party, Plant, Sales Order etc etc (all non Mandatory fields)
My problem is, any credit memos created with Order Type CR does not show up in the report. Can some one please tell me where this is controlled and how it can be made active?Dear Madhu,
Get your custom report checked by your technical buddy (ABAP), if coding has been done to fetch data on CR order type.(Credit Memo request).
Also, if your Credit Memo billing Type is there in the output logic or not.
At the same time, get it checked from the User if this issue was there existing before or not.
Regards,
Vivek Sahni -
PC not seeing the network and not being seen on the network
I set up a WRT54G to use as my network router. I have two pc's hooked up to it via wire, as the software used for the company requires this. 1 is my server, and there are no problems. I can connect to the Internet fine. The number 2 pc can connect to the Internet fine, but it can not see the network. Number 1 pc can not see the number 2 pc on the network. HELP!!! The work groups are the same, and I followed all the instructions hooking up. My laptop even hooks up to the wireless Internet. What do any of you think? Thanks
Check firewalls, and any virus suite that you may be using. Make sure that under trusted IPs you have check trust my network. You should be able to find that under personal firewall tabs in the virus suite.
Stlbluesfan30
Cisco Network Academy Student -
Unable to see data in the report or workbook
Hello All,
We are struggling to display data in the report level or workbook, however the data is available in Multiprovider.
Error Message: "No Applicable Data Found"
Steps Carried Out:
1. Dropped the BIA Indexes for relevant cubes and Reactivated the Multiprovider, still did not work.
2. When we checked for previous years like 2013, we are able to see data in the report. To elaborate an issue, we loaded budget data for year 2015 as requested by user. Restricted the same filters from the Query in the Multiprovider and able to see the data in the backend, however not data can be seen in the Report.
3. Three Hierarchies are restricted in the Filters of the Query.
It would be great, if any of you can help us to fix the issue.
Best Regards,
SudhakarHi,
Have you used any exists?
in exists is there any system date kind?
Can you try to run your report thru RSRT and use debug option there.
before reporting please check your all connected targets have data for reporting.
mean at targets-->request tab, reporting symbol was there or not.
Any master data objects included in multi provider?
if yes then please check those, if any ACR was running then it may cause you.
if possible try to develop simple query with as per needs(mean to see 2015 data only).
As my guess selections/filters migth be hidden, please check those.
Thanks -
Scheduling the report from Infoview portal does not show up data
"The crystal report is based on a SAP BI query. The parameters of the report are basically the parameters(SAP variables) of the SAP BI query. When we run the crystal report in the CR Report Designer tool, it runs fine showing all the data correctly. Then we published the crystal report to the Crystal Enterprise Server from the SAP BI system. Through the Infoview portal, the user clicks on the 'Schedule' link for the report and sets the parameters. When the 'Schedule' button is clicked, it runs successfully but no data is seen in the report except for the template. But under the same report, in Infoview portal, if the user selects "View" link, sets the parameters and then clicks the 'Execute' button, it runs successfully showing all correct data.
Dont understand why it works for 'View' link but doesn't work for 'Schedule' link. Is there any setting that needs to be made for this?"
Thanks in advance,
SriHi Sri,
When we are able to see the report and unable to schedule the report with in the Info view, then check with the user rights.
Just try to login with admin account and try to schedule the report.
Also check the report in CMC and see the preview of the report.
If the user doesn't have enough rights to schedule the report, then it doesn't allow it.
Also check with in the Folder rights with in the report is saved.
Regards,
Naveen. -
Report for displaying open POs
Hi frds
i wants to display the open POs line item and its quantity .anyone give me the logic for this report.
thanks
Pari Vendhan.RHI frd
thanks for information ..while puting your logic in report program its not displaying open POs.
with this msg i hv attached my codings ..pls correct my mistake.
REPORT Z_CONSUMABLE_ROL.
Data : Mat_no like mara-matnr, "Material Number
Plant1 like ekpo-werks, "Plant
com_co like mseg-bukrs, "Company Code
store like mseg-lgort, "Storage
SELECTION SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK 01.
SELECTION-SCREEN: BEGIN OF BLOCK 02 WITH FRAME TITLE text-001.
SELECT-OPTIONS MATERIAL FOR mat_no.
SELECT-OPTIONS Plant FOR plant1.
SELECT-OPTIONS COMPANY FOR COM_CO.
SELECT-OPTIONS STROAGE FOR STORE.
SELECTION-SCREEN: END OF BLOCK 02.
SELECTION-SCREEN: END OF BLOCK 01.
DATA DECLARETION FOR INTERNAL TABLE.
Data : begin of itab occurs 0,
matnr like mara-matnr, "Material Number
maktx like makt-maktx, "Material Desc
meins like mara-meins, "UOM
minbe like marc-minbe, "ROL
lgnum like mseg-lgnum, "Warehouse
ebeln like ekKo-ebeln, "PO Number
menge like ekpo-menge, "PO Qty
banfn like eban-banfn, "PR Number
meng1 like eban-menge, "PR Qty
mblnr like mseg-mblnr, "PO Number
ELIKZ like EKPO-ELIKZ,
end of itab.
SELECT STATEMENT.
select a~menge
a~werks
a~ELIKZ
b~banfn
b~menge
c~matnr
c~meins
d~maktx
e~minbe
f~lgnum
f~mblnr
f~bukrs
f~lgort
h~ebeln
INTO CORRESPONDING FIELDS OF TABLE ITAB FROM EKPO as a
inner join EBAN as b on aBANFN = bBANFN
inner join MARA as c on cMATNR = aMATNR
inner join MAKT as d on dMATNR = cMATNR
inner join MARC as e on eMATNR = cMATNR
inner join MSEG as f on fMATNR = cMATNR
inner join EKKO as h on hEBELN = aEBELN
where cmatnr in MATERIAL and awerks in PLANT and f~bukrs in
COMPANY and f~lgort in STROAGE.
write :/ 'Material_No' color 4,
20 'Material_Desc' color 4,
55 'UOM' color 4,
65 'ROL' color 4,
75 'Warehouse' color 4,
87 'Open Po' color 4,
115 'PO Qty' color 4,
125 'PR No.' color 4,
145 'PR Qty' color 4.
write : sy-uline.
if itab-ELIKZ = 'X'.
loop at itab.
write : / itab-matnr,
20 itab-maktx,
55 itab-meins,
65 itab-minbe,
75 itab-lgnum,
87 itab-ebeln,
105 itab-menge,
125 itab-banfn,
135 itab-menge.
endloop.
endif. -
"Failed to open the connection" problem related to multiple tables in the report?
Post Author: Gadow
CA Forum: Data Connectivity and SQL
System specifics:
Web environment using ASP.Net 2.0 (from Visual Studio 2005 Professional)
Crystal Reports 2008, v. 12.0.0.549, Full
We have set up the following method for displaying reports via our website:
User is sent to a report-specific page. The user is given some filtering options specific to the report that will be viewed. When the user has specified the data filters, the user clicks a button.
The page wraps up the report parameters -- selection query, formula values, report location, the name to be displayed, etc. -- into a class which gets put into the Session object.
The page redirects to DisplayReport.aspx. ALL reports redirect to this page.
DisplayReport.aspx retrieves the report parameters from Session. A ReportDocument object is created and loaded, then set with the data from the parameters class.
A ConnectionInfo object is created and set with the relevant log on credentials. All of the reports draw from the same database, so the connection information is hard-coded as the same for all reports. The page then iterates through all of the tables in the Database.Tables collection of the ReportDocument and calls ApplyLogOnInfo to each table using the ConnectionInfo object.
The page is rendered and the user gets the filtered report.
We currently have seven reports. Five reports work fine and display the correctly filtered data with no error messages. Two reports generate a Failed to open the connection error and do not display. I have verified that the queries being sent to DisplayReport.aspx are valid, and as I said the connection information itself is hard-coded in the one page that displays the reports and this is identical to all reports.
The five reports that do work all have a single data table, either an actual database table or a single view. The two reports that do not work all have multiple tables. As far as I can tell, this is the only difference between the sets; all seven reports are based on the same DSN and I have verified the database on all of the reports. All of the reports were written using Crystal Reports 8, and all of the reports display fine in a Windows app I wrote some years ago using Crystal Reports 8. Again, the only difference between those reports that do work and those that do not is the number of tables used in the report: one table or view in the reports that display, more than one table (tables only, none use views) in the reports that do not display.
As for the code I am using, below are the relevant methods. The function MakeConnectionInfo simply parses out the components of a standard SQL connection string into a ConnectionInfo object. DisplayedReport is the ID of the CrystalReportViewer on the page.Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs)
Dim o As Object = Session("ReportParams")
Dim ReportURL As String = ""
'Verify that there is a ReportParameters object
If o Is Nothing OrElse o.GetType IsNot GetType(ReportParameters) Then 'Redirect to the error page
Response.Redirect("/errors/MissingReport.aspx")
End If
ReportParams = CType(o, ReportParameters)
'Verify that the report exists
ReportURL = "/Reports/ReportFiles/" + ReportParams.ReportName
ReportPath = Server.MapPath(ReportURL)
If Not File.Exists(ReportPath) Then
Response.Redirect("/errors/MissingReport.aspx?Report=" + ReportParams.ReportTitle)
End If
InitializeReport()
End Sub
Protected Sub InitializeReport()
Dim RD As New ReportDocument
Dim CI As ConnectionInfo = MakeConnectionInfo(DB_Bonus)
Dim RPF As CrystalDecisions.Shared.ParameterField = Nothing
RD.Load(ReportPath)
If ReportParams.SelectString <> "" Then
Dim Adapt As New SqlDataAdapter(ReportParams.SelectString, DB_Bonus)
Dim DS As New Data.DataSet
Adapt.Fill(DS)
RD.SetDataSource(DS.Tables(0))
End If
For Each kvp As KeyValuePair(Of String, String) In ReportParams.Formulas
Dim FFD As FormulaFieldDefinition = Nothing
Try
FFD = RD.DataDefinition.FormulaFields(kvp.Key)
Catch ex As Exception
'Do nothing
End Try
If FFD IsNot Nothing Then
Select Case FFD.ValueType
Case FieldValueType.DateField, FieldValueType.DateTimeField
If IsDate(kvp.Value) Then
FFD.Text = String.Format("Date()", Convert.ToDateTime(kvp.Value).ToString("yyyy, MM, dd"))
Else
FFD.Text = "Date(1960, 01, 01)"
End If
Case FieldValueType.StringField
FFD.Text = String.Format("""""", kvp.Value)
Case Else
'For now, treat these as if they were strings. If things blow up here,
'we will need to add the appropriate formatting for the field type.
FFD.Text = String.Format("""""", kvp.Value)
End Select
End If
Next
For Each T As CrystalDecisions.CrystalReports.Engine.Table In RD.Database.Tables
Dim TLI As TableLogOnInfo = T.LogOnInfo
TLI.ConnectionInfo = CI
T.ApplyLogOnInfo(TLI)
Next
DisplayedReport.ReportSource = RD
End Sub
Does this approach not work with reports containing multiple tables, or is there something I'm missing? Any meaningful suggestions would be much appreciated.Dear Dixit,
Please refer to the Crystal report landing page to get the details
information about the support for crystal report issues.
Please use the following thread to post your questions related to
crystal report.
SAP Business One and Crystal Reports
Regards,
Rakesh Pati
SAP Business One Forum Team. -
Report to extract open POs.
Hi ,
Is there any standard report to extract open POs in SAPHi Dear,
You can make use of ME2L,ME2M,ME2N,ME2J.
In all the above reports enter plant,document type or document date as input field and then execute the report.
You will see the column Still to be delivered (both for Quantity and Value) thus you can get open PO.
Alternatively you can make use of Purchase Order history column in above mentioned report.
Sort the report in ascending order and PO against which no GR is made will be having Purchase Order history blank and those having history will be having special icon.
Maybe you are looking for
-
This particular project is made up entirely of still photos with Ken Burns moves and dissolves between each photo. As I got further into the project, the voice over audio started stuttering, and now it hardly plays at all with a motorboat sound when
-
Macbook Air 2013 able to run Logic, iMovie and Final cut?
Hey, I am planning on buying a Macbook Air 13" 2013-version. I want to use it to record music with logic pro, edit my own youtube-videos with iMovie and maybe a little with Final Cut. Do you think thats possible?
-
iv just got a new(replacement) 3gs from apple 2 hours ago. iv come to put all my stuff back on it(sync) it said i was complete i desconected the usb phone went off, came back on but is now is stuck at the apple logo screen??? any ideas? iv tried hold
-
Command-F in Safari 3 for OSX 10.4.11
How do I get the traditional behavior of command-F back in Safari? Thanks, Emilly
-
Project Start Date – modification after project was saved.
I created new project with a start date 01/April/2015 and saved it. Next, I change the start date to 14/April/2015 in the setup. However still in statistics windows I see the start date as 01/April/2015. Additionally, every new task has start date 0