Problems accessing sky's remote record option
Has anyone found a good way to access the sky site in particular the remote record options in the tv guide. They have this fancy javascript based system that is a bit sluggish on a pc/mac but it crashes the iphone based safari. They have an option for a screen reader version which doesnt seem to work but this doesnt on a full computer either so thats a sky problem.
If anyone has found any way around it I would appreciate a post as it would be a useful function to have
Thanks
Nick
TV Plus is now available in iTunes and provides Sky+ Remote Record
http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewSoftware?id=292756958&mt=8
Similar Messages
-
Problem accessing company resources remotely using Cisco VPN Client
I connect to my company's network remotely using Cisco VPN client both from a PC (v 4.0.1) and from a MacBook Pro (v 4.9.00)(same configs), and use Remote Desktop to connect to my work computer, and now i'm able to use Citrix to run applications on the company server.
The problem occurs on the Mac when I'm connecting from a location that uses the same private domain IP as our company's private domain. Our company's private domain is 192.168.1.x, so when I'm using the Mac on a WiFi router that happens to be set to 192.168.1.1, the Mac can connect using VPN but the remote desktop cannot connect to my work computer. Presumably, the Mac doesn't "know" that I'm trying to go through the VPN for the connection and not connect to something locally.
This problem seems to be unique to the Mac. Every Windows machine with the same client installed has no problems no matter what WiFi I've tried. The Mac works fine on any WiFi that is not 192.168.1.x.
However, since 192.168.1.x is very common (hotels, airports, etc., its a major problem with the Mac.
Suggestions are greatly appreciated!
Also, now that we're moving to Citrix, our administrator has created a webpage on the intranet that we launch applications from, but the Mac cannot find that page when connected to VPN from 192.168.1.x. Same problem.
Thanks in advance.Hi,
I presume you have split-tunneling activated.
1. Make sure the 192.168.1.x is on the protected networks and on the MacBook client, disable "Allow local LAN access"
2. Create a separate group for the Mac users and assgn them a different pool (192.168.100.x )and advertise it in your company to point to the VPN Concentrator.
3. Use the NAT feature on your VPN concentrator.
If this helped, please rate.
Regards,
Daniel -
Problem accessing an adjacent remote network over VPN (2 asa5505)
Hello all,
I have 2 ASA5505 (CORP and remote) connected via VPN. The remote site contains 2 subnets (192.168.1.0/24 and 192.168.0.0/24 (for remote VPN users)). The corp site has 192.168.2.0/24 directly connected to ASA5505 and an adjacent network connected via another device namely the 172.16.0.0/16 network.
I am able to ping site-to-site between 192.168.0 -> 192.168.2
and
192.168.1 -> 192.168.2
I am unable to ping from remote site to the 172.16 network however.
I added permit ACLs on both my NAT and CRYPTO ACLs. and when I am trying to ping the remote 172.16 network I get the following messages on my CORP ASA:
4 Aug 12 2007 02:59:52 400010 192.168.2.1 192.168.0.10 IDS:2000 ICMP echo reply from 192.168.2.1 to 192.168.0.10 on interface inside
reply is timing out though.
Any tips would be appreciated!
My ACLS:
REMOTE SITE:
#NONAT
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 172.16.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.0.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.0.0 255.255.255.0 172.16.0.0 255.255.0.0
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 192.168.1.0 255.255.255.0
#CRYPTO ACL
access-list 100 extended permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list 100 extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list 100 extended permit ip 192.168.1.0 255.255.255.0 172.16.0.0 255.255.0.0
access-list 100 extended permit ip 192.168.0.0 255.255.255.0 192.168.2.0 255.255.255.0
access-list 100 extended permit ip 192.168.0.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list 100 extended permit ip 192.168.0.0 255.255.255.0 172.16.0.0 255.255.0.0
access-list 100 extended permit ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list 100 extended permit ip 192.168.0.0 255.255.255.0 192.168.1.0 255.255.255.0
CORP SITE:
#CORP
access-list 200 extended permit ip 192.168.2.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list 200 extended permit ip 172.16.0.0 255.255.0.0 192.168.3.0 255.255.255.0
access-list 200 extended permit ip 172.17.0.0 255.255.0.0 192.168.3.0 255.255.255.0
access-list 200 extended permit ip 192.168.2.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list 200 extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list 200 extended permit ip 172.16.0.0 255.255.0.0 192.168.0.0 255.255.255.0
access-list 200 extended permit ip 172.16.0.0 255.255.0.0 192.168.1.0 255.255.255.0
nat (inside) 0 access-list 200
nat (inside) 1 0.0.0.0 0.0.0.0
#CRYPTO ACL
access-list 105 extended permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list 105 extended permit ip 192.168.2.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list 105 extended permit ip 192.168.3.0 255.255.255.0 192.168.0.0 255.255.255.0
access-list 105 extended permit ip 172.16.0.0 255.255.0.0 192.168.1.0 255.255.255.0
access-list 105 extended permit ip 172.16.0.0 255.255.0.0 192.168.0.0 255.255.255.0
access-list 105 extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
Thanks in advance!The config looks ok.
If you were trying to ping 172.16.x.x I don't see why the log would be what you displayed. Where are you pinging from, the remote site?
"4 Aug 12 2007 02:59:52 400010 192.168.2.1 192.168.0.10 IDS:2000 ICMP echo reply from 192.168.2.1 to 192.168.0.10 on interface inside"
Does the 172.16 network have a route to the 192.168.0.0 and 192.168.1.0 network? -
Problem accessing Activity window using Command-Option A
Until a couple of weeks ago, I was able to download an Internet video file by pressing Option-Command A and then double clicking the largest file while pressing option. Now, nothing happens when I press Command-Option A. Any ideas?
The activity window is absent from Safari 6.
-
Problem in accessing data to remote pc
Hi,
I have a problem on accessing file on the remote pc, im using
coldfusion
then im trying to get file from a remote pc but its not
working im using
cfdirecrtory can somebody help me in my problem please...
Thanks in advance,,
johncheck that the user CF is running under has proper
permissions to access
the remote location. CF runs as a local user, so would not
normally
have access rights to remote locations...
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com -
Problems accessing mails remotely off MS Exchange Server 2003
Hi
I am trying to access my mails remotely off my companies server webmail while using Safari.
The address is normally as follows . Https://thecompanyservername/exchange
When i type this in the Safari navigation bar its comes up that the page cannot be found
I also have bootcamp installed and when i type in the address when i am in windows mode on internet explorer its takes me to the login page no problem.
My company uses MS Server 2003 . Wondering if its a compatibility problem and if there could be a patch etc
Any advice welcome as to how i can access my mails remotely without having to go into windows mode.
ThanksiPhone and iPad use a different way of accessing the server.
I don't know the exact details, but we are using Zarafa instead of Exchange and have the same problem:
iPhone and the likes can connect to Zarafas z-push interface, which is some identical interface to the native Exchange interface, while the desktop e-mail application tries to interface with the web front end (via http) of the server.
These are completely different setups and it depends on the actual installation of the server to get this going.
So, you will most likely need different access parameters for the desktop - and the web mail feature has to be enabled on the Exchange server.
In my opinion using the web mail interface is just silly. On the other hand, the native protocol has less features comparedto the web front end, so you are somehow stuck with sins of the past.
Good luck! -
My credit card has been charged for book, however my purchase history shows no record of the transaction and I have not received the book. The online problem reporting system does not have options to report this incident. Who can I call?
Would be problems with purchases, billing, and redemption option. It's not 100% exact to your issue, but it will get you to the right department.
Go here https://expresslane.apple.com/GetproductgroupList.do then select ITunes, then Store, then Purchases, Billing, and Redemption. Then.. probably pick "My topic is not listed." -
Problem while accessing object in remote database
Hi All,
We have a procedure "UPDATE_CONV_DETAILS" created in the remote databse in the "apps" schema. The synonym for the procedure is created in the billing schema(present in the remote database). A dblink is created the local database through which we are tring to access the remote object "UPDATE_CONV_DETAILS".
Dblink script:
create public database link PRE_TO_CEL
connect to BILLING
identified by BILLING
using 'MAP1';
When trying to access the object from the local machine using the schema name.object_name it works fine:
SQL> DESC APPS.UPDATE_CONV_DETAILS@PRE_TO_CEL
PROCEDURE APPS.UPDATE_CONV_DETAILS@PRE_TO_CEL
Argument Name Type In/Out Default?
IN_MOBILE VARCHAR2 IN
IN_SERVICE_CODE VARCHAR2 IN
IN_STATUS VARCHAR2 IN
OUT_ERROR_CODE NUMBER OUT
But when trying the access the same object using the synonym_name it gives the error:
SQL> DESC UPDATE_CONV_DETAILS@PRE_TO_CEL
ERROR:
ORA-04043: object APPS.UPDATE_CONV_DETAILS does not exist
Regards,
KirtiYou have two schema.
apps
billing
both reside in remote database.
there on procedure and on procedure u create one synonym and u want to access it.
ur remote database name is "map1"
on ur local database ur create one dblink to access remote database.
ORA-04043: object string does not exist
Cause: An object name was specified that was not recognized by the system. There are several possible causes:
- An invalid name for a table, view, sequence, procedure, function, package, or package body was entered. Since the system could not recognize the invalid name, it responded with the message that the named object does not exist.
- An attempt was made to rename an index or a cluster, or some other object that cannot be renamed.
Action: Check the spelling of the named object and rerun the code. (Valid names of tables, views, functions, etc. can be listed by querying the data dictionary.) -
i cant access my facebook on my ipad, when i try all i get is a dialog box saying sign "settings or cancel, so if I go to settings and try to sign in, the message in settings says "there is a problem accessing your account please re-enter your password, when i do nothing happens. Any help would be appreciated.
Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts, so you will be able to use the iPad again.
It will try to make a backup every time your iPad is plugged to the charger and connected to a network. To prevent that this message appears soon, open Settings > iCloud > Storage & Backup, and choose Backup Now -
Foxtel Remote Record allows you to send recording requests directly to your Foxtel iQ set-top unit. From the Online Guide (when viewing on your computer), you can 'drag and drop' programs from the Online Guide's grid view into the Remote Record panel then click on 'Record'. No matter where you are, if you have internet access, you can log onto the Foxtel Online Guide and set the Foxtel iQ to record your favourite shows.
To use Remote Record you'll need to be logged into your My Foxtel Online Account and have your Foxtel from Telstra account linked. If you don't already have a Foxtel Online ID, visit Foxtel's website to sign up. You'll need to provide the number from the Foxtel access card located in your Foxtel iQ set-top box, so we recommend signing up at home.
Use Foxtel iQ Remote Record on your mobile
Step 1
On your compatible Telstra mobile, access your main menu, then select My Place, then select Foxtel, then select TV Guide
If you have a Windows Phone® 7 device, press the Start button, then tap the Foxtel tile. You will be guided to download the Foxtel TV Guide from the Windows Phone® Marketplace. If you don't have a My Place option on your mobile, open your mobile phone's internet browser to access BigPond Mobile. This can usually be done by pressing the BigPond button on your mobile. When BigPond Mobile has loaded, select Mobile Foxtel, then select TV Guide at Home.
Step 2
Select the show you wish to record, and then select Record on my iQ. You will then be prompted to enter your Foxtel Web ID details
Use Foxtel Remote Record with the Foxtel online TV guide
Step 1
If you haven't already done so, register with the Foxtel online TV guide. You'll need your Foxtel smartcard number
Step 2
On the online TV guide, click the programs you'd like to record, and select Add to Remote Record
Step 3
Repeat this process until you've selected all the programs you'd like to record
Step 4
Click Record. This will send a message to your Foxtel iQ or iQHD set-top unit to set the recordings
Common causes of Foxtel iQ Remote Record problems
The storage in your Foxtel iQ box at home is full. You can delete older programs you no longer require to free up some space.
The Foxtel iQ box was not powered on or in standby mode when the program started.
The Foxtel iQ box already was already recording two programs at the same time (three programs for Foxtel iQHD boxes).
The Foxtel iQ recording was cancelled by someone using the Foxtel iQ box at home.
In extreme circumstances, there may be a problem sending your recording request to your Foxtel iQ box.It doesn't address what I needed help with
i tried recording a show and an error code came up HO-UNP just before that, we were watching a show on foxtel and it turned off automatically and would not respond to control, we reset the box like i was told to do when troubleshooting and now it wont record. we have had to reset it a few times after the lines problem at wooloongaba that affected a big area. thank you for your time! Oh and the phone line is crackly too and i cant use my house phone, havent been able to for a while! Thank you!! -
Set up remote users in Win 2012 R2 remote server so employees can access their desktop remotely
Hi we want to get rid of PC/desktops in house. We are a 10 employee firm. We want all of them access the server remotely from their own laptop etc., They mostly use MS Office and adobe reader etc., very light work. How can
we set up a virtual desktop for each of the users in the Server. I heard about Remote Desktop Services but not sure how this would work.
we are planning to get a one managed dedicated server from some hosting provider with decent config (say Xeon Server with 8 GB or more RAM with SATA or SAS drives. If you have any suggestions please feel free to comment on whom to buy. Azure wouldn't
work as we cannot install MS Office App on the remote desktop services VM!).
Do I need a separate server for AD?
Does Win SRV 2012 have option to create remote desktop for users that can log in remotely?. I understand we need RDS CAL no problem,
How can we allow users to store data - what's a best option.. We can attach a SAS/SATA drive that users can map to is one idea.
We plan on getting Office 365 E3 plan that comes with Office Pro Plus. We understand that we need volume license for office to be installed on remote server. We will be migrating email and sharepoint to O365.
Appreciate if some one could advise how this would work. Also from backup point of view, what options that we need to consider.
thank youHi,
If all the users only need to use same applications, you can make the server as the Remote Desktop Session host server (RDSH), install the RD licensing role and install proper
RDS CALs.
If it is a Windows Server 2012, you can refer to
Deploying the RDS Quick Start deployment type in Windows Server 2012 (for Session Virtualization)
http://social.technet.microsoft.com/wiki/contents/articles/10421.deploying-the-rds-quick-start-deployment-type-in-windows-server-2012-for-session-virtualization.aspx
AD is not the requirement for you.
In addition, if you also would like to access the server from Internet, you may need to do one of the following:
1. Purchase a static public IP address and connect the server to the Internet directly.
2. Purchase a domain name and bind the IP address of the server to it.
3. If the server do not connect to Internet directly, you need to configure port forwarding on your router to forward TCP/DUP 3389.
4. Setup the VPN or RD gateway server.
Allow Remote Desktop connections from outside your home network
http://windows.microsoft.com/en-us/windows7/allow-remote-desktop-connections-from-outside-your-home-network
More information:
Remote Desktop Services Overview
http://technet.microsoft.com/en-us/library/hh831447.aspx
Installing Remote Desktop Session Host Step-by-Step Guide
http://technet.microsoft.com/en-us/library/dd883275(v=ws.10).aspx
Remote Desktop Services: Getting Started
http://technet.microsoft.com/en-us/library/dd736539(v=ws.10).aspx
Deploying Remote Desktop Licensing Step-by-Step Guide
http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
VPN connects but unable to access resources on remote network
HI,
I'm able to ping the ASA interface once the VPN is connected but unable to access any of the resources located on the remote network such as shares and computers. The cisco vpn client shows data being sent and recieved when I ping the interface on the ASA but it doesn't recieve any data when I attempt to ping or access other resources on the network.
ASA Version 8.2(5)
hostname HOST_NAME
domain-name default.domain.invalid
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
speed 10
duplex half
interface Ethernet0/4
speed 100
duplex full
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.10.8.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 12.x.x.x x.x.x.x
boot system disk0:/asa825-k8.bin
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
name-server 10.10.8.2
domain-name default.domain.invalid
same-security-traffic permit intra-interface
object-group service Vipre tcp
port-object range 18082 18082
port-object range 18086 18086
object-group network town
network-object 192.168.0.0 255.255.0.0
access-list outside_20_cryptomap extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list new extended permit ip host 192.168.0.1 any
access-list new extended permit ip any host 192.168.0.1
access-list outside_20_cryptomap_1 extended permit ip 10.10.8.0 255.255.255.0 192.168.0.0 255.255.252.0
access-list townoffice_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list townremote_splitTunnelAcl standard permit 10.10.8.0 255.255.255.0
access-list outside_access_in extended permit tcp any interface outside object-group Vipre
access-list outside_access_in extended permit tcp any object-group Vipre interface inside object-group Vipre
access-list outside_access_in extended permit tcp any eq 3389 10.10.8.0 255.255.255.0 eq 3389
access-list test extended permit ip host 192.168.0.6 host 10.10.8.155
access-list test extended permit ip host 10.10.8.155 host 192.168.0.6
access-list test extended permit ip host 10.10.8.2 host 192.168.3.116
access-list test extended permit ip host 192.168.3.116 host 10.10.8.2
access-list test extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit ip host 10.10.8.155 host 192.168.3.116
access-list bypass extended permit tcp 192.168.0.0 255.255.0.0 10.10.8.0 255.255.255.0
access-list bypass extended permit tcp 10.10.8.0 255.255.255.0 192.168.0.0 255.255.0.0
pager lines 24
logging enable
logging buffered debugging
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool vpn 10.10.8.125-10.10.8.149 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-522.bin
no asdm history enable
arp timeout 14400
global (inside) 1 interface
global (outside) 1 interface
nat (inside) 1 192.168.0.0 255.255.0.0
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface 18082 10.10.8.2 18082 netmask 255.255.255.255
static (inside,outside) tcp interface 18086 10.10.8.2 18086 netmask 255.255.255.255
static (inside,outside) tcp interface 3389 10.10.8.2 3389 netmask 255.255.255.255
static (inside,inside) 192.168.0.0 192.168.0.0 netmask 255.255.0.0
static (inside,inside) 10.10.8.0 10.10.8.0 netmask 255.255.255.0
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 12.70.119.65 1
route inside 192.168.0.0 255.255.0.0 10.10.8.250 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
aaa authentication telnet console LOCAL
http server enable
http outside
http outside
http inside
http outside
http inside
http outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt noproxyarp inside
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 40 set pfs
crypto dynamic-map outside_dyn_map 40 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 60 set pfs
crypto dynamic-map outside_dyn_map 60 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 80 set pfs
crypto dynamic-map outside_dyn_map 80 set transform-set ESP-3DES-SHA
crypto dynamic-map outside_dyn_map 100 set pfs
crypto dynamic-map outside_dyn_map 100 set transform-set ESP-3DES-SHA
crypto map outside_map 20 match address outside_20_cryptomap_1
crypto map outside_map 20 set pfs
crypto map outside_map 20 set peer 69.87.150.118
crypto map outside_map 20 set transform-set ESP-3DES-SHA ESP-3DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash md5
group 2
lifetime 86400
crypto isakmp policy 30
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto isakmp nat-traversal 30
telnet 10.10.8.0 255.255.255.0 inside
telnet timeout 5
ssh 63.161.207.0 255.255.255.0 outside
ssh timeout 5
console timeout 0
dhcpd dns 10.8.8.2
dhcpd address 10.10.8.150-10.10.8.200 inside
dhcpd dns 10.10.8.2 interface inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
group-policy aaa internal
group-policy aaa attributes
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
default-domain value domainname
group-policy bbb internal
group-policy bbb attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec l2tp-ipsec
split-tunnel-policy tunnelall
split-tunnel-network-list value townoffice_splitTunnelAcl
default-domain value domainname.local
group-policy townremote internal
group-policy townremote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2 4.2.2.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value domainanme
group-policy remote internal
group-policy remote attributes
wins-server value 10.10.8.2
dns-server value 10.10.8.2
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value townremote_splitTunnelAcl
default-domain value dksecurity.local
address-pools value vpn
username xxxx password . encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxxx password . encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy dksecurityremote
username xxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
username xxxx password encrypted privilege 15
username xxx password encrypted privilege 15
username xxx attributes
vpn-group-policy remote
tunnel-group 69.87.150.118 type ipsec-l2l
tunnel-group 69.87.150.118 ipsec-attributes
pre-shared-key *****
tunnel-group remote type remote-access
tunnel-group remote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group townremote ipsec-attributes
pre-shared-key *****
isakmp keepalive disable
tunnel-group townremote type remote-access
tunnel-group townremote general-attributes
address-pool vpn
default-group-policy townremote
tunnel-group lansingremote ipsec-attributes
pre-shared-key *****
class-map tcp-bypass
match access-list bypass
class-map test
match access-list new
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
no dns-guard
no protocol-enforcement
no nat-rewrite
policy-map global_policy
class test
class inspection_default
policy-map tcp
class tcp-bypass
set connection random-sequence-number disable
set connection advanced-options tcp-state-bypass
service-policy global_policy global
service-policy tcp interface inside
prompt hostname context
call-home reporting anonymous prompt 2
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:c724d6744097760d94a7dcc79c39568a
: endYou need to change the VPN pool ip subnet to something other than the same ip range used on the inside interface.
Sent from Cisco Technical Support iPad App -
Accessing the very last record in a transparent table.
Hi!
There's any way to read the last record of a transparent table?
My problem is:
I have to access the very las record of a Z table because I need the maximun value of a numeric field (that is the first field of the primary key).
I used a SELECT MAX, with no condition , but I was asked to find a more performance solution.
There is any way to access the last record of a table? Something like we have for the internal tables with the READ TABLE INDEX N, but with a select statement?
Thanks a lot for your help!Yes, that was my first thought, but I made a comparising between both options with SE30.
Check this numbers:
TIME: 11,377,702
select * from t100 into table t_t100.
sort t_t100 descending.
read table t_t100 index 1.
TIME: 954,218
DATA: MAX_MSGNR type t100-msgnr.
SELECT MAX( MSGNR ) FROM T100 INTO max_msgnr.
Select MAX is better...
I don't think there is a better solucion... Maybe a big brain here has an idea...
Vasanth, thanks for your quick reply! -
Blank Page prints even though "Suppress Printing If No Records" option is t
Blank Page prints even though "Suppress Printing If No Records" option is thicked.
My environment:
Crystal Report Developer Full version 11.5.11.1470
Windows Server 2003 SP2 32-bit.
We have a third party vendor application written in Java -let's call it "print deamon", but my company doesn't have access to the source code.
The print deamon essentially listens to the core application which is located remotely, receive some print instructions such as label name, printer name, crystal reports version (8.5 or 11) and a few parameters that are passed to the crystal report template.
When the version is Crystal Reports 11 and the template is open and query is executed (using Oracle JDBC) and if the template's query does not retrieve any rows, a blank page still prints even though the option to suppress printing is thicked.
With Crystal Reports 8.5 version, we have no issues.
recycling the blank page is not an option in our high volume print environment, these paper and labels are wasted big time, third party vendor says this is an issue with crystal reports XI api.
These are some of the libraries the Print Deamon uses:
09/25/2009 10:29 AM 2,055,844 cecore.jar
09/25/2009 10:29 AM 211,919 celib.jar
09/25/2009 10:29 AM 830,301 corbaidl.jar
09/25/2009 10:29 AM 371,142 CRDBJavaServerCommon.jar
09/25/2009 10:29 AM 121,413 CRDBXMLServer.jar
09/25/2009 10:29 AM 670,312 CrystalCharting.jar
09/25/2009 10:29 AM 2,162 CrystalCommon.jar
09/25/2009 10:29 AM 94,290 CrystalContentModels.jar
09/25/2009 10:28 AM 110,657 CrystalDatabaseConnectors.jar
09/25/2009 10:29 AM 686,963 CrystalExporters.jar
09/25/2009 10:29 AM 67,807 CrystalExportingBase.jar
09/25/2009 10:29 AM 581,270 CrystalFormulas.jar
09/25/2009 10:29 AM 330,909 CrystalQueryEngine.jar
09/25/2009 10:29 AM 2,271,217 CrystalReportEngine.jar
09/25/2009 10:29 AM 453,829 CrystalReportingCommon.jar
09/25/2009 10:29 AM 1,985,441 ebus405.jar
09/25/2009 10:29 AM <DIR> external
09/25/2009 10:29 AM 227,996 jrcadapter.jar
09/25/2009 10:29 AM 9,988 jrcerom.jar
09/25/2009 10:29 AM 94,180 keycodeDecoder.jar
09/25/2009 10:29 AM 448,627 MetafileRenderer.jar
09/25/2009 10:29 AM 380,520 rasapp.jar
09/25/2009 10:29 AM 843,544 rascore.jar
09/25/2009 10:29 AM 283,131 ReportPrinter.jar
09/25/2009 10:29 AM 793,445 ReportViewer.jar
09/25/2009 10:29 AM 95,382 rpoifs.jar
09/25/2009 10:29 AM 40,545 Serialization.jar
09/25/2009 10:29 AM 3,777 URIUtil.jar
Let me know if there's anything we can do before engaging our third party vendor to produce their source code.
Thank you - KleberIt's not relavent now is it? Do what ever works in CR XI.
Also you may want to upgrade to CR XI R2. Go to this link: http://www.sdn.sap.com/irj/boc and download the trial version of CR XI R2 and use your XI keycode, then apply the patches which you can get to by clicking on the BusinessObjects tab above, then Downloads.
Direct link to the Trial version: http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx
Once updated you can then go to the Keycode site and get a XI R2 keycode to enable oll of the features.
Thank you
Don -
Problem accessing another public ip in same subnet
Hi,
I have searched around for a previous post regarding this but can't find an issue similar to mine (or I'm just too stupid to understand that it is )
I have a Cisco 5505 at a small business that I help. The problem is that the ISP are providing public IPs to multiple customers in a /24 subnet. The ASA has a single public IP configured 8.8.8.8 (not really, just for the examples sake) with a subnet mask of 255.255.255.0.
The webserver I have to access is not managed by me and is located in a different location (same town though) has 8.8.8.115, it is located in the same subnet as the ASA.
How would I make this work? I have tried to configure a static arp entry for the web server but it just won't work. If i place a computer directly on the outside interface I have no problem accessing the web server.
I am running ASA version 8.2, but I could upgrade if it would help me solve the problem.
Any help with this issue is much appreciated.The ISP only specify one gateway in that range and that is 8.8.8.1 so any other would not let me access internet.
Once again thank you for your time.
: Saved
ASA Version 8.2(1)
hostname ciscoasa
domain-name XXXXXXX
enable password XXXXXXX encrypted
passwd XXXXXXX encrypted
names
name 8.8.8.8 Outside_IP
name 192.168.20.2 Server
name 192.168.20.11 rav-dc01
name 192.168.20.12 rav-ms01
name 192.168.20.13 rav-rds01
interface Vlan1
nameif inside
security-level 100
ip address 192.168.20.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address Outside_IP 255.255.255.0
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
boot system disk0:/asa821-k8.bin
ftp mode passive
dns server-group DefaultDNS
domain-name XXXXXXX
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list inside_nat0_outbound extended permit ip any 192.168.25.0 255.255.255.0
access-list RemoteVPNSplittunnel standard permit 192.168.20.0 255.255.255.0
access-list outside_access_in extended permit tcp host 100.100.100.228 interface outside eq 3389
access-list outside_access_in extended permit tcp any interface outside eq smtp
access-list outside_access_in extended permit udp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq 4125
access-list outside_access_in extended permit tcp any interface outside eq https
access-list outside_access_in extended permit tcp any interface outside eq pptp
access-list outside_access_in extended permit tcp any interface outside eq 444
access-list outside_access_in extended permit gre any interface outside
access-list outside_access_in extended permit udp any interface outside eq 444
access-list outside_access_in extended permit tcp any interface outside eq www
access-list inside_access_in extended permit tcp host rav-ms01 any eq smtp
access-list inside_access_in extended deny tcp any any eq smtp
access-list inside_access_in extended permit ip any any
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RemoteVPNPool 192.168.25.100-192.168.25.200 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) udp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface 4125 Server 4125 netmask 255.255.255.255
static (inside,outside) tcp interface https rav-ms01 https netmask 255.255.255.255 dns
static (inside,outside) tcp interface pptp Server pptp netmask 255.255.255.255
static (inside,outside) tcp interface 3389 rav-rds01 3389 netmask 255.255.255.255 dns
static (inside,outside) tcp interface smtp rav-ms01 smtp netmask 255.255.255.255
static (inside,outside) udp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface 444 Server 444 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255 dns
access-group inside_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8.8.8.1 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
aaa-server rav_Intern protocol radius
aaa-server rav_Intern (inside) host rav-dc01
key CiscoAsa5505RAV2012
radius-common-pw CiscoAsa5505RAV2012
http server enable 8080
http 192.168.20.0 255.255.255.0 inside
http 192.168.25.0 255.255.255.0 inside
http 100.100.101.128 255.255.255.192 outside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection timewait
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto dynamic-map outside_dyn_map 20 set pfs
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
telnet 192.168.20.0 255.255.255.0 inside
telnet timeout 5
ssh 192.168.20.0 255.255.255.0 inside
ssh timeout 5
console timeout 0
management-access inside
dhcpd auto_config outside
dhcpd address 192.168.20.190-192.168.20.200 inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
ntp server rav-dc01 source inside
webvpn
group-policy RemoteVPN internal
group-policy RemoteVPN attributes
wins-server value 192.168.20.11
dns-server value 192.168.20.11
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value RemoteVPNSplittunnel
default-domain value rav.nu
split-dns value rav.nu
username SupportVPN password XXXXXXX encrypted privilege 0
username SupportVPN attributes
vpn-group-policy RemoteVPN
tunnel-group RemoteVPN type remote-access
tunnel-group RemoteVPN general-attributes
address-pool RemoteVPNPool
authentication-server-group rav_Intern
accounting-server-group rav_Intern
default-group-policy RemoteVPN
tunnel-group RemoteVPN ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect pptp
inspect icmp
inspect icmp error
service-policy global_policy global
prompt hostname context
Cryptochecksum:8481ab3aa01b23bad17bacb2aca7197a
: end
asdm image disk0:/asdm-621.bin
no asdm history enable
Maybe you are looking for
-
Hi, I'm currently trying to package Adobe Pro 9.4.5 I have started with 9.3 and am running the below script (This is what I found on the adobe forums) for the updates to 9.4.5 When then attempt to install the MSI I recieve this error: "Error 1308. S
-
Summing Track Stack not properly saving as a patch???
Hey Guys, So... - I created a Yah-Yah talking bass with the FM setting on the Retro Synth - used a bitcrusher to create the formant effect by downsampling - Then I created a new track for a sub bass sound seperate from the Yah-Yah - I put both the Ya
-
Suggestions for tracks i can use on a 3 min sports promo?
I am creating a 3 min sports promo for a client, they are willing to pay for the use of a well known pop or rock song from the last 10 years, i just need to find the right song and contact the publishers for using it, it will be used one time only at
-
Our iBook was stolen this morning--obviously it requires a log-in password to get into the system. Being a relative "new-bie" to Macs after having a PC for years, I want to get an idea of whether or not someone is going to be able to get into any of
-
Process chain (RSPC) modifcation in Quality and production system
Hi, In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system. As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa