Usage Decision & Inspection close completed BAPI

Hello friends,
i'm looking for a BAPI / FM that giving an Inspection Control, it makes the Usage Decision and the Inspection Close Completed automaticaly..
Is there any ?
Best Regards
Ricardo Jorge Monteiro

Now i'm getting a message "Selected set code does not exist, or data entered is incomplete" in The BAPI...
Here Is the program code i'm using:
data: ud_data like BAPI2045UD occurs 0 with header line,
      sy_data like BAPI2045SS occurs 0 with header line,
      return like BAPIRETURN1 occurs 0 with header line,
      c_return like BAPIRET2 occurs 0 with header line.
ud_data-INSPLOT = '030000007159'.
ud_data-UD_FORCE_COMPLETION = 'X'.
ud_data-UD_CODE = 'A'.
ud_data-UD_CODE_GROUP = 'SCC01'.
ud_data-UD_SELECTED_SET = 'SCC1'.
ud_data-UD_PLANT = '02'.
append ud_data.
CALL FUNCTION 'BAPI_INSPLOT_SETUSAGEDECISION'
EXPORTING
    NUMBER               = '030000007159'
    UD_DATA              = ud_data
LANGUAGE             =
IMPORTING
UD_RETURN_DATA       =
STOCK_DATA           =
   RETURN               = return
TABLES
   SYSTEM_STATUS        = sy_data
USER_STATUS          =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT          =
IMPORTING
   RETURN        = c_return.
Can anyone please help me this is very urgent

Similar Messages

Record usages decision- inspection lot stock

hi gurus,
when i am using a record usages decision screen (QA11) after putting my inspection lot number it show me only two tabs Defects and charterstics it didn't show me an inspection lot stock tab.
Please suggest
Regards
Maashish

Hi Maashish,
I believe that your PO is for cost center.
when you will recieve the material using MIGO for This PO, then matieal stock/Value will be posted to Consumtion Account ( Stck will not posted to store) and GR/IR for Vendor.
In this case if Inpection lot generated, then using QA11/QA32 you can records quality information in Result & UD.
In this case Transfer posting 321/105 for material will not take place.you can input quality inforamation only.
Hope this piece of info. will help to resolve your query..
Cheers
Manoj Singh

BAPI or FM for changing usage decision on Inspection lot

Hi,
Does anyone know of any BAPI or FM which can change usage decision on inspection lot. I'm already aware of BAPI_INSPLOT_SETUSAGEDECISION. This only works when there is no UD on inspection lot.
Thanks for your help.
Stephen

hi peter,
BAPI_INSPCHAR_SETRESULT Confirm Inspection Results. BAPI_INSPLOT_GETDETAIL Load Detail Data and Usage Decision for Inspection Lot
see this link for list of bapis....
http://www.sapbapi.com/bapi-list/
thanks
sagar
reward me points if usefull

Sample still showing in quality inspection stock after usage decision completed

After process order completed, we have received 100 units as a quality inspection stock. After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the to sample usage
98 units successfully move to unrestricted stock.
However 2 units for sample still showing quality inspection stock.
I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
Do you have any idea why sample still showing in quality inspection stock. It should consumed and zero out the quality inspection stock in MMBE

Hi,
Please check you MIC's control Indicators.
Is it tick on Destructive insp. under Sample tab ?
Please tick it and try again with whole process.
Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

BAPI to post stock movement in QM's Usage Decision

I'm looking for a bapi or standard program to register stock movements in QM as a result of a usage decision.
We've tried using BAPI_GOODSMVT_CREATE with no success as it returns error QA 495 "Change the inspection stock of material in QM only"
Thanks
André

Hello!
You do not need to create TO manually. Set up RLAUTA11 report as a job.
To run RLAUTA11 you have to maitain:
creation indicator:
Logistic Execution->Warehouse Managment->Activities->Transfers->Set Up Autom. TO Creation for TRs / Posting Change Notices->Automatic TO creation/control data: for warehouse level: any character
Logistic Execution->Warehouse Managment->Activities->Transfers->Set Up Autom. TO Creation for TRs / Posting Change Notices->Movements assign: set up your indicator in field "Automatic TO" Background processing (MvT type and warehouse, probably your e.g. MvT is 321 - realese from Quality Inspection stock)
Next You must create variant for job with your warehouse and creation indicator.
Best Regards,
Marcin

Usage decision thru QA11 for forcibly give the UD code on a inspection lot

All,
I am trying to do an usage decision through QA11.Where in Batch for respective Inspection Lot we have to find the PD,SLED and NID there .
when i forcibly give the UD code on a inspection lot and save this it will calculate the NEXT inspection Date.But some times the NID value is greater than SLED value after the UD.
My requirment if NID is greater than SLED after UD then give a waring message.
Any suggestions would be appreciated.
Regards,
Sanjit

Hi Sanjit,
You can just try the BAPI: BAPI_INSPLOT_SETUSAGEDECISION
for more help, check the following helpful link:
Re: Stock posting through mb1b
Hope this will help you.

IDoc or BAPI to send Usage Decision to external system

Dear SAP experts,
I am searching for an IDoc or BAPI which allows me to send the Usage Decision (on a QM Inspection Lot) to an external system.
Can anyone help me with this? Please advice.
Best regards,
Kenny

I think there is no standard IDoc that can be used. But you can define (customize) a follow up action for the usage decision in R/3. This follow up action could be a Z_* program that triggers a custom IDoc. This would suit your requirements I guess!
Regards,
Kai

Printing of Inspection Report After Usage Decision

Hi,
I want take the print out of Inspection Report after Usage Decision completed.......... Can you plz guide the complete Confiuration & related transaction codes for this........
Regards,
Raghunath

Inspection report can be printed from QA33 t_code.
There are some pre requesites for this,
i) In material master 'Inspection with task list' and 'Check characteristics' should be activated.
ii) Inspection plan for that material should be present.
iii) Record results for these inspection characteristics and take Usage decision.
iv)In QA33 t_code, u can see 'inspection report tab' . click on that tab.
v) Give output device and see print preview.
U can see inspection report with all details.
Plz. revert back

Need to send data, after Usage decision in quality inspection (QA11)

Hi all,
After Usage decision in quality inspection (QA11), i need to send some data like material number, qty etc to external database or to external party. is there anyway i can achive this in real time? real time means, it should send the appropriate data to external party after usage decision is made.
Thanks
Pabi

Hi,
You can change results recording in case the MIC in the inspection plan of the lot are marked as "long term characteristics", else it wont be possible to change result recording.
you can change the UD code only after giving the Usage decision.
you cannot change the defects recording.
Thanks
SUMIT

Partial quality inspection & partial usage decision?

Hello Friends
Inspection lot is created when GR is done against purchase order, in normal case result is recorded for whole lot and usage decision is made partially / fully.
Say business want to inspect (record result) only 50 pieces and want to do usage decision of 50 pieces immediately and again want to inspect (record result) another 50 pieces of same lot and want to do the usage decision u2026u2026u2026u2026how to do it?
As per my knowledge once inspection is done & usage decision is done system stops to inspect that lot again.
Looking for your valuable input as soon as possible.
Thanks & Regards
Swanad

hi
inspect (record result) only 50 pieces and want to do usage decision of 50 pieces immediately and again want to inspect (record result) another 50 pieces of same lot and want to do the usage decision
For result recording to be done for qunatity In control indicator of each char tick on long term Inspection.
This will allow you to do RR after UD has taken.
For UD to be done Partially means stock posting partially ...
You can create a UD code(AP) & in customization do not post it automatically.
Then You can only post 50 Qty initially with UD -AP
then for rest of the qty in QA32 select those lots with UD & stock post rest of the items when you carry out RR for rest of 50 .
This is the solution
Regards
Sujit

Quality inspection stock showing in urestricted stock without usage decision

Dear Gurus,
We have came across a serious issue in Quality department as follows.
The skip stock status "REL SKIP SPRQ CROK QLCH" is showing in unrestricted use stock even before the usage decision is made. Now when we are trying to reject the skip material, in MMBE there is no stock against Quality inspection. & the stock when rejected is getting deducted from unrestricted stock.
Request you please guide me so as to transfer the "REL SKIP SPRQ CROK QLCH" stock yo quality ispection once 105 is done.
Kindly guide what configuration settings need to be changed.
Regards,
Mahesh

Thanks Saravan.
As I am new to QM kindly clarify following things to me.
1. Even if we reject the skip stock by making the usage decision, it won't be deducted from unrestricted.
2. Skip/DOL lot will never be shown under Quality inspection in MMBE.
3. The only rejection of SKIP/DOL that will happen is the line rejection.
4. Once the line rejection happens materila status will be removed as DOL & converted to normal for next 5 lots.
Correct me if I am wrong.
Thanks & Regards,
Mahesh

Usage decision and inspection plan

Hi,
1. Once Usage decision has been done, can we still change it? how can i set that it can be changed?
2.Is it possible to create an Inspection plan for a group of material? for example, I just need to maintain 1 Inspection plan for 30 material. something like it can be group like reference operation set? if yes how? if no, why?
Thank you so much,
raymond

Hi
Hi,
1. Once Usage decision has been done, can we still change it? how can i set that it can be changed?
Yes UD can be changed anytime but you can not change the stock postng.Also for history in QM view tick on "document req"
2.Is it possible to create an Inspection plan for a group of material? for example, I just need to maintain 1 Inspection plan for 30 material. something like it can be group like reference operation set? if yes how? if no, why?
Yes this is possible through QP01/02 --->in header there is one tab"Material assignment" here you can enter
Group conter (same say "1" ) material & plant.
Same Inspection plan is reffered to the multiple materials.You can add as materials possible.
But remember that Unit of measurement of all materials must be same.
Sujit

Usage decision of Inprocess Inspection lot as per batch

Dear,
i am doing result recording to inspection point with partial lot and with batch,
i have some charactristics which is to be transfer to the batches for that i have to do separate Usage decision with every batches
Is it possible??
note i have used 120 inspection point.( with shift wise) and partial lot with batches..
Regards
Pravin

You can mkae a UD for the lot, but not by batch.
The characteristic data should be transferred to the batch after the valuation of each inspection point however. So your results should already be copied over long before you make the UD.
Craig

Rejection in Usage Decision of an inspection Lot

Dear Masters,
I want to know that is there any standard method to trigger the notification for rejection of an inspection lot?
Please do explain. Thanks in advance.
Chin2

Dear Pushpa,
Once again thanks for your reply. In the case mentioned above I can only define one notification type, what if I have more than one notification type to be used on rejection in usage decision? I will explain my scenario as below:
I have 3 different quality notification types i.e, 1) Engineering Calibration notification (For Engineering Equipments)
2) Quality Calibration Notification (For Quality Equipments)
3) Fleet & Trade Calibration Notification (For Fleet & Trade Equipments)
Now, I have 3 different types of orders from which the inspection lot will be created and for those 3 different types of orders I want 3 different types of notifications to be generated on rejection of the inspection lot.
Please do guide if there is any standard method to achieve this
Thanks once again.
Chin2

Unable to change stock posting date at usage decision while inspecting HUs

If we were using materials without WMS it's simple: thereu2019s a button in the screen for stock posting by which we're able to change document date and posting date; but we're using WM and the screen is slightly different: the button I'm referring it's gone!
So, how to change the posting date at posting stock in QA11 when we're using handle units? Some end-user told me that in version 4.7 this was possible. I don't think so ...unless there was something customized at WM IMG...or maybe they were using a USER EXIT to bring a pop-up window for this (I'm starting to believe that this was implemented..). This is the first time I work with HUs, so I don't know how to manage this.
Anyone?
Seba
Edited by: Sebastian Sniezyk on Apr 3, 2009 10:16 AM

I solved it in this topic: Changing posting date at usage decision for handle units. How?

Usage Decision & Inspection close completed BAPI

Similar Messages

Maybe you are looking for