Storage capacity display issue

After updating to iOS 7.0.3, I found out that, upon my first sync, I gained about 13GB of storage capacity on my iPhone. I know I don't have as much space as it is telling me I have. Either I lost a lot of information, or I'm not sure what. I can't find anything missing.

No - I have not tried removing all of them, but I think I am leaning in another direction as the capacity bar DID work correctly at one time, also when I had other devices attached. I mean, it simply could be that I removed iPod too quickly from my PC (or wouldn't that be possible). I am nosing around in the attributes of the folders contained in iPod - should any of them be read only? Like the Contacts folder? Should I change the attributes? Would a reset (not a restore) help?

Similar Messages

Display Issues in Premiere Pro CS4

I'm having some weird display glitches in Adobe Premiere Pro CS4 in the timeline area. I attached a picture that shows what it looks like. This happens whenever I drag clips on the timeline and it makes it so it takes a lot longer to edit my videos.
I'm really hoping that Apple or Adobe fixes this issue. I really can't afford to upgrade my creative suite to CS 5.5! And I would prefer to stick with OS X Lion.
Well it looks like I can't upload an image. Any ideas?

Keep in mind that the following sustained transfer rates - as a rough rule of thumb - apply:
SATA & eSATA: 80 - 100 MBps
Firewire 800:       50 - 60 MBps
Firewire 400:       30 - 35 MBps
USB2:                20 - 25 MBps (depending on other USB devices connected it could be even lower.)
I agree that your storage capacity with 1 TB is enough, but the interface is too slow. If you do not have an eSATA port on you Vaio, you can get a Xpress card to eSATA connector with two eSATA ports to cover that. Also keep in mind that the C drive may be a 4200 or 5400 RPM disk and not 7200.
Mininmum requirements state: a DEDICATED 7200 RPM disk and while your USB disk is 7200, it lacks in the sustained transfer rate when compared to SATA or eSATA. BTW I think Adobe should explicitly mention SATA or better.
Above I mentioned for USB depending on other USB devices attached. USB shares the bandwidth among all devices connected. If you have a USB stick connected, a USB receiver for wireless keyboard or mouse, a USB printer, they all have to share the bandwidth and further reduce the sustained transfer rates of the USB disk.
Hope this explains it a bit.

Storage space Major issue! - MacBook Pro 15" Retina Mid-2012

Hello,
I've had my MacBook Pro Retina for just a little over a year now, and i've just come across an issue that was never present before, when I delete items, the full storage capacity isn't restored. When I delete a 1.29GB movie for example, it gives me only 0.3GB back. This is making me very nervous, any more details you need to assist me in solving i'll be happy to provide if asked to do so in the comments, I'd really like this fixed so I can get back to my work.
Thanks!

You may notice a difference in available space statistics between Disk Utility, Finder, and Get Info inspectors. This is expected and can be safely ignored. The Finder displays the available space on the disk without accounting for the local snapshots, because local snapshots will surrender their disk space if needed.
About Time Machine's "local snapshots" on portable Macs

HT201318 I upgraded my iCloud storage capacity for a higher tier and the device does not actually reflects said upgrade. How can this be resolved since my credit card was charged

I upgraded my Icloud storage capacity to a higher tier and my Iphone does not reflect the change although my credit card was charged and the device is nor properly backup. How can this be resolved?

It seems to take up to a couple of days for the upgrade to take hold, at least that's the experience of some users. Give it 24 hours before contacting apple.
For customer service issues, go here...
https://expresslane.apple.com/Issues.action

Ipod Touch showing incorrect storage capacity

I have an Ipod Touch 64 GB 5th Gen running iOS 8.2. I'm not certain when this issue occurred initially from the devices perspective - only when I first noticed it. The device was running 8.1.1.3 at the time. I was working with it in Itunes and clicked on the iPods summary screen to check for the iOS 8.2 update. I noticed the capacity of the device was showing as 56.62 GB. Available space was 43.19. The little memory symbol for the Ipod shows 64 GB. I was troubled by the capacity message. Ran Itunes diagnostics:
Microsoft Windows 8 x64 Business Edition (Build 9200)
TOSHIBA Satellite C75D-A
iTunes 12.1.1.4
QuickTime 7.7.6
FairPlay 2.7.50
Apple Application Support 3.1.2
iPod Updater Library 12.0
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 8.1.1.3
Apple Mobile Device Driver 1.65.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 3.06.0.2770
Gracenote MusicID 3.06.0.2770
Gracenote Submit 3.06.0.2770
Gracenote DSP 3.06.0.2770
iTunes Serial Number 75286FB00A477378
Current user is not an administrator.
The current local date and time is 2015-03-13 07:23:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {EA2F37E1-C0C6-4B2E-8502-2FEBB1728B73}
Description: TAP Adapter V9 for Private Tunnel
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {9E82BF43-0AE1-4D44-97A5-76EEEFCF205A}
Description: VPNSecure.Me TAP-Win32
IP Address: 10.44.0.106
Subnet Mask: 255.255.255.252
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server: 10.44.0.105
Lease Obtained: Fri Mar 13 04:46:46 2015
Lease Expires: Sat Mar 12 03:46:46 2016
DNS Servers: 208.67.222.222
208.67.220.220
Adapter Name: {605EF4BF-18B3-47B6-8548-A92A49871AAC}
Description: Microsoft Wi-Fi Direct Virtual Adapter #2
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Adapter Name: {71B99335-878C-49A8-A69C-3677A8222E4A}
Description: Realtek 8812AU Wireless LAN 802.11ac USB NIC
IP Address: 192.168.1.153
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Mar 13 02:34:28 2015
Lease Expires: Sat Mar 14 02:34:28 2015
DNS Servers: 208.67.222.222
208.67.220.220
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2015-03-13 07:17:31.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D: TSSTcorp CDDVDW SU-208DB, Rev TF01
Audio CD in drive.
Found 15 songs on CD, playing time 62:40 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 02:52:00
Track 3, start time 05:33:07
Track 4, start time 11:37:60
Track 5, start time 16:36:22
Track 6, start time 21:17:52
Track 7, start time 25:45:65
Track 8, start time 31:37:55
Track 9, start time 34:51:27
Track 10, start time 38:57:30
Track 11, start time 42:08:12
Track 12, start time 46:02:27
Track 13, start time 49:29:37
Track 14, start time 52:24:42
Track 15, start time 57:14:52
Audio CD reading succeeded.
Get drive speed succeeded.
**** Device Connectivity Tests ****
iPodService 12.1.1.4 (x64) is currently running.
iTunesHelper 12.1.1.4 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
No Universal Serial Bus Controller found.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
Mark's iPod touch, iPod touch (5th generation) running firmware version 8.2
Serial Number: CCQM40VQFMJG
**** Device Sync Tests ****
Sync tests completed successfully.
No help there. I ran the Update to iOS 8.2. Succesful. Still same capacity. Checked the iPod's Gerneral/About screen - Capacity listed 56.6 GB.
Have I lost access to 8 GB of capacity here? Should I reset the thing?
Message was edited by: meteoricide
Total of Audio, Video and App Data is 14.12 GB. Available shows 43.19 GB. That adds up to 57.31.GB. So there is a 700 K discrepancy. Total Photo Data happens to be 700 K. Just saying.

You only have 56.6 GB available to you. The difference between that and the 64 GB advertised capacity is taken up by:
The operating system since you can't use that for storage
and how GB is advertised and used/reported by the operating system. See:
How OS X and iOS report storage capacity - Apple Support
The update did not change anything except likely reducing the capacity by 10 or so MB since update typically add things and thus takes more storage for the operating system

If i buy macbook pro from india will i able to upgrade my storage capacity from us or uk

If i buy macbook pro from india will i able to upgrade my storage capacity from us or uk?

i have this
Retina display: 15.4-inch (diagonal) LED-backlit display with IPS technology; 2880-by-1800 resolution at 220 pixels per inch with support for millions of colors
Native resolution: 2880 by 1800 pixels (Retina); scaled resolutions: 1920 by 1200, 1680 by 1050, 1280 by 800, and 1024 by 640 pixels
2.0GHz
2.0GHz quad-core Intel Core i7 processor (Turbo Boost up to 3.2GHz) with 6MB shared L3 cache
8GB of 1600MHz DDR3L onboard memory
256GB
Intel Iris Pro Graphics
Will i able to upgrade this 256 to 512 GB

Consumption of storage capacity in in SNP capacity view

Hi Experts,
when I check a storage resource in the capacity view the key figure "Capacity Consumption" (9ACACON) is displayed.
Could anybody please explain how is this key figure calculated?
This does not take place in a macro - I think this is related to the assigned key figure function done in the planning area customizing. The key figure "quantity stored" (9ASTOCK) has the key figure function "6007 Storage Quantity with Resource Consumption". Therefore the amount stored in this key figure (and other key figures with the function 6007 assigned) consumes the capacity.
I want to check capacity consumption of the projected stock in the future which is only calculated in auxiliary key figure u201CStock on Hand (Projected)u201D. This key figure has also function 6007 assigned.
So I assume that
a) the calculation of capacity consumption takes place by the key figure function - How specifically?
b) if I create a new (non auxiliary) key figure where the projected stock is stored in the consumption is correctly calculated?
Looking forward to your answers!
Julian

Hi julian,
let me rephrase what I said above:
When I say:"the capacity consumption for storage capacity is not based on projected stock but on the orders": I mean:
The capacitiy consumption calculation is not based on the proejcted stock key figure.Instead the storage quantity is calculated based on initial stock, receipt AND demand.
This should give the same result, but what I meant is: I don't think that the changes you have done for the projected stock have any impact on the storage capacity consumption.
In you case it looks like the result is based only on receipt as you mentioned, but to be honest even that look wrong (something arriving on day x should consume the storage untill it is removed and send somewhere else, and not only on the date of arrival)
Note the standard data view 9ASNP94/SNP94(2) - the capacity view- does NOT contain the projected stock key figure.
What you want to see is correct: in standard it should work! (except that it is not based on the projected stock key figure itself, but it is recaculated...)
Did you check if the standard view 9ASNP94/SNP94(2) was showing the right result?
I asked you:" How your system behave with other order types (e.g ditribution demand, production...) "
I meant: when you have a distribution demand, is your capacity consumption reduced?
Thanks and Regards
Julien

Storage Capacity of the Battery - Msg.

The msg. " Storage capacity of the battery seems to be very slow and that it may impact performance" and it requests that I go to www.hp.conf/go/techcenter/startup. -- In the mean time my PC has slow down to a crawl! -- Pls. help

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that you are having an issue with the Battery, and wanted to help! To start, can you provide me with the Product Number of the notebook? Here is a link you can use that will help you find your Model and Product Number: How Do I Find My Model Number or Product Number? In the meantime, please review the following documents, as they may help to resolve the issue for you:HP Notebook PCs - Testing and Calibrating the Battery (Windows 7)HP PCs - Resolving Slow System Performance (Windows 7)HP PCs - Computer Locks Up or Freezes (Windows 7) Please let me know if this information was helpful by clicking the thumbs up below.
Regards!

Considering storage capacity constraint during planning

Hi,
How can we model the storage capacity constraint in SNP or PP/DS..?
The requirement is ,during planning the storage capacity constraint for storing the finished product in the plant needs to be considered.
Thanks
Ram

Hi Somnath,
Thanks for your response.
your answer was helpful.
Regarding the option which you are currently using in your project, I believe it will only shows the alerts. I am not sure if you are using this only to display the alerts. Could you please elaborate what action you take based on this alert..?
It will be helpful if you can briefly explain the requirement and how the same was mapped.
Thanks for the help.
Wishing you and forum members, a very hapy new year.
Best Regards,
Ram

Storage capacity of a Application variable?

Hi All,
I want to display a common information to all the user.
The size of the text information(may consists of html content for formatting) may vary each time.
1) Is storing the information in application variable a better way?
2) What is the storage capacity of a Application variable?
3) Cookies storage capacity is 4k and restricts certain characters.Do Application/ Session variable have storage capacity or it restricts any character.
Regards,
Maha

Hello Friend,
If U are refering about the mem size of implicit Application varible in JSP.
Then i think U are refering to an Instance related to ServletContext.
If that is the case it enitrely depens on the webserver you are using.There would few option by which one can fix the cache size but again how to manage that cache space specified between ServletContext,HttpSession,HttpServletRequest and PageContext is entirely dependent upon webserver you are using.....
U can try referring the link below which is related to SUN-ONE Application server
http://docs.sun.com/source/816-7150-10/dwdeploy.html
and as far as restriction is concerned i don't think u would have restriction of storing any unicode charecters..... But i'm not completely sure abt it through.

Storage capacity full

my macbook pro's storage capacity is nearly full...so what should I do?

Freeing Up Space on The Hard Drive
1. See Lion/Mountain Lion/Mavericks' Storage Display.
2. You can remove data from your Home folder except for the /Home/Library/ folder.
3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
4. Get an external hard drive on which to store some of your files after which you can
erase the data from your internal drive to free up space.
5. Also see Freeing space on your Mac OS X startup disk.
6. See Where did my Disk Space go?.
7. See The Storage Display.
You must Empty the Trash in order to recover the space they occupied on the hard drive.
You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.w

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well.

I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!

Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement.

Display issue on brand new 2014 X1 Carbon Touch

So I was about to start raving about my X1C that I just received. Loving the display, the keyboard, build quality, etc. I had no gripes and was just browsing away when suddenly the screen did the full glitch. I recognize this as what happens when something's messed with the motherboard/display adapter. So I gave it a reset. All was normal and then it happened again. I was able to replicate it 3-4 times and it keeps happening. I never dropped it or anything. It was always just stationary.
I can't believe this. I had problems with the first gen non-touch and touch. I was hoping by now they have improved.
Link to image 1
Link to image 2
Link to image 3
Moderator note: images totalling more than 50k converted to links per forum rules: Lenovo Community Participation Rules

Hi,
Welcome to Lenovo Community Forums!
I’m sorry to hear that you have display issues in your brand new Lenovo X1 carbon.
From the snapshots, it seems like a cable/LCD issue. Is the display working fine when you connect it to an external monitor?
Since it’s a brand new machine, I strongly recommend you to contact our technical support for assistance.
Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
Best Regards,
Mithun.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Display Issues with mini (Mid 2010) and LG L246WP

I recently purchased a new mini (Mid 2010 base model) and planned to use it with my 24" LG L246WP monitor, which is about 3 years old. The monitor has VGA, component, and HDMI inputs.
I used an HDMI-to-HDMI cable to connect the mini directly to the monitor, and the output is completely messed up. The mini recognized the monitor (titling the System Preferences > Display dialog with 'L246WP') and set it to the monitor's native resolution of 1920x1200, but on the monitor the image is cropped to what looks like a 4:3 aspect ratio and with part of the image shifted up and left so I cannot view the top menu bar or the left hand side of the desktop. The monitor's on-screen display shows 1080p in this mode.
The Display dialog also gives me an option for 1080p. I can select this and use the Underscan slider to resize the desktop output to fit on the screen, but it is still shifted left and must be resized smaller than the available display space (plus the total image is only 1080 pixels, not using the monitor's full native screen). In this mode, 1080p also shows on the monitor's on-screen display.
I tried 1024x768 to see if I could get a properly-positioned image, but the desktop was shifted just like in the 1920x1200 case and the monitor's on-screen display status still reported 1080p.
The monitor has a menu setting under an HDMI heading with "Video" and "PC" options, but changing this selection does not make a difference.
Since the monitor came out before HDMI was as widespread as it is today, it came with a DVI-to-HDMI cable, so I also tried using that cable with the HDMI-to-DVI adapter that came with the mini, but this did not make a difference either.
To prove it wasn't the HDMI cable, I connected the mini to my Samsung 6300 series 40" LED HDTV and with some tweaking of the Underscan slider the displayed image filled the screen perfectly.
I've searched the Internet and various forum threads (i.e. http://hardforum.com/showthread.php?t=1167222&page=63) seem to indicate this monitor can send a corrupted EDID that causes issues, especially with nVidia graphics drivers. On Windows you can use registry or driver hacks to override the EDID with the correct values, but on OS X this doesn't seem possible (I was hoping for a Terminal one-liner but it seems this doesn't exist). I have seen some mentions of the shareware SwitchResX (http://www.madrau.com), which looks like it gives you the option to override resolution settings, but I haven't tried this yet.
It also appears to me that the monitor is always interpreting the signal (or the mini is always sending the signal) as 1080p, even if I've set 1920x1200 in the Display dialog. I don't know if this is a defect in the monitor where it always assumes the HDMI input is a 1080p source (previous I used it with an Xbox 360 with no issues but that was 1080p HDMI), or if is a bug in the graphics drivers (or at least a lack of flexibility / miscommunication to the user trying to handle a corrupt EDID).
I asked my local Genius Bar for advice today (without bringing any hardware in) but was not told anything I didn't already know.
I'm trying to determine the best way to work through this issue. *My questions are:*
Would it make any difference if I used a Mini DisplayPort-to-DVI adapter (and then my DVI-to-HDMI cable to the monitor's HDMI input)?
What about a Mini DisplayPort-to-VGA adapter? In the past I used a 12" Powerbook (via a mini-DVI-to-VGA adapter) with this monitor and had no display issues like this, but I'd prefer to stick with a digital connection on my brand new mini.
Is SwitchResX the only practical way in OS X to override a corrupt EDID and force the mini to output a certain resolution?
Besides the various adapters and SwitchResX, is there anything else I should try before buying a new monitor?

Hello EPWilson4984.
I have been experiencing the same issues you described. Connecting my brand new Mac Mini to my Westinghouse 24”monitor (L2410NM, 1920x1200 pixel resolution) produces a very fuzzy and washed out image quality. The Mac recognizes the monitor and applies the right resolution (1920x1200), but it looks just awful. The EDID info is definitely not right.
Now, I tried your suggestion (DVI-to-HDMI), and similar suggestions from other threads, but nothing works. Nothing seems to work at all.
The main input for the monitor is HDMI, so whatever cable I use, in the end always has to connect to the monitor via HDMI. I tried all these combinations with zero success:
Mac mini -> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –HDMI adapter-> HDMI cable -> monitor (result: fuzzy and blurry image)
Mac mini -> displayport –DVI adapter-> DVI-to-HDMI cable -> monitor (result: it gives me a blank screen, no image at all)
I’m running out of options. Don’t know what to do. The 24” monitor produces beautiful, crisp images when hooked to my Windows 7 PC. It looks horrible when connected to my brand new Mac Mini.
Any alternatives you may have come across? Please let me know, thank you.

Repeated iMac Problems, Display Issues now Kernel Panics

I’m lost on what’s wrong with my 2008 iMac and I think I just have to bring it back into Apple for a third time to have it repaired. But something is obviously not working that is causing these issues.
About a month ago, my computer began showing heavy pixilation, flickering images and the on-screen graphics. The computer appeared to keep working in the background from what I could tell so I came to conclusion that it must be the graphics card that’s failing and I’ll need to have it looked at.
My 2008 iMac was custom-built by Apple with the Nvidia GeForce 8800GS that was offered as an upgrade option. There have been several posts on the display and graphics discussion board about that graphics card along with other postings other places about the problems the Nvidia GeForce 8-series had.
The display problems I mention above would not happen immediately, it would happen as the computer warmed up and was used for 3-5 minutes.
Anyway I brought my computer into Apple explained to them what I believed was the problem and the Apple Store technician agreed with me. Because I did not purchase AppleCare, it cost me $400 and a week without my iMac to have that card replaced.
I got the computer back two weeks ago and everything seemed fine. It was working as it always had. I even was running SMC Fan Control in order to keep the computer as cool as I could (the Nvidia problem was related to overheating).
But this morning, this is what I woke up to:
http://img97.imageshack.us/img97/7436/photoijr.jpg
The computer now has a semi-permanent pixilation when it starts up (as suppose to the pixilation 3-5 minutes into use). But more worrisome now is I cannot start up the computer without it going into a kernel panic. I tried resetting the PRAM, I tried starting in safe mode. The only thing I haven’t tried yet is booting from an external HD which I will try this evening (to hopefully isolate it if it’s hardware or a software problem).
The Apple Hardware Test has been unhelpful. When it originally failed three weeks ago, the test showed nothing and this morning when I ran it (permanent pixilation and all), it showed nothing. I feel like if it was a software issue the pixilation would have disappeared during the hardware test because that’s not an OS-X based program.
Here are my specs on this computer:
2008 iMac 24" 2.8ghz Intel Core Duo, 4 gigs of RAM (Crucial Purchased, I have original sticks somewhere), 1 TB HD, Nvidia GeForce 8800GS.

Hi, just to update you, I came home today and did a few things that didn't seem to solve my Mac's problems:
- I booted up from my firewire "safe" drive that I keep a copy os x on to see if I had a corrupted hard drive or something. It booted into the kernel panic I described above.
- I also swapped out the crucial RAM for Apple's factory RAM. It also booted into the Kernel Panic.
In both incidents, the display issues didn't go away. Now instead of pixelization i have vertical bars running in a pattern across my screen.
I'm currently trying to boot onto the OS X CD at this point to see if I could do a reinstall. It's taking quite awhile to boot into that.
With that in mind, I think we're still having graphics card issues or more seriously some logic board problem.

Storage capacity display issue

Similar Messages

Maybe you are looking for